mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
3a3d998c12
Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.
0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"
Specification
SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
µUSB 2.0 (debugging & power input)
2x 3.5mm jack for microphone & headphone (SGTL5000)
Arduino Shield expansion with I2C, SPI, UART, and GPIO
JTAG
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)
Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.
Installation
Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.
As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
138 lines
2.8 KiB
Makefile
138 lines
2.8 KiB
Makefile
#
|
|
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
|
|
PKG_NAME:=uboot-layerscape
|
|
PKG_VERSION:=lsdk-1903
|
|
PKG_RELEASE:=1
|
|
|
|
PKG_SOURCE_PROTO:=git
|
|
PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot
|
|
PKG_SOURCE_VERSION:=80b2d2bc4cab0a8363c9b7eba8064b1795f12670
|
|
PKG_MIRROR_HASH:=5c467af40b4479f0ea16697ab54602bed815a23212293184943dca8a3a406d5c
|
|
|
|
include $(INCLUDE_DIR)/u-boot.mk
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
define U-Boot/Default
|
|
BUILD_TARGET:=layerscape
|
|
BUILD_SUBTARGET:=armv8_64b
|
|
BUILD_DEVICES:=$(1)
|
|
UBOOT_IMAGE:=u-boot-dtb.bin
|
|
ENV_SIZE:=0x2000
|
|
endef
|
|
|
|
define U-Boot/ls1012afrdm
|
|
NAME:=NXP LS1012AFRDM
|
|
UBOOT_CONFIG:=ls1012afrdm_tfa
|
|
ENV_SIZE:=0x40000
|
|
endef
|
|
|
|
define U-Boot/ls1012ardb
|
|
NAME:=NXP LS1012ARDB
|
|
UBOOT_CONFIG:=ls1012ardb_tfa
|
|
ENV_SIZE:=0x40000
|
|
endef
|
|
|
|
define U-Boot/ls1012afrwy
|
|
NAME:=NXP LS1012AFRWY
|
|
UBOOT_CONFIG:=ls1012afrwy_tfa
|
|
ENV_SIZE:=0x10000
|
|
endef
|
|
|
|
define U-Boot/ls1043ardb
|
|
NAME:=NXP LS1043ARDB
|
|
UBOOT_CONFIG:=ls1043ardb_tfa
|
|
endef
|
|
|
|
define U-Boot/ls1043ardb-sdboot
|
|
NAME:=NXP LS1043ARDB SD Card Boot
|
|
UBOOT_CONFIG:=ls1043ardb_tfa
|
|
endef
|
|
|
|
|
|
define U-Boot/ls1046ardb
|
|
NAME:=NXP LS1046ARDB
|
|
UBOOT_CONFIG:=ls1046ardb_tfa
|
|
endef
|
|
|
|
define U-Boot/ls1046ardb-sdboot
|
|
NAME:=NXP LS1046ARDB SD Card Boot
|
|
UBOOT_CONFIG:=ls1046ardb_tfa
|
|
endef
|
|
|
|
|
|
define U-Boot/ls1088ardb
|
|
NAME:=NXP LS1088ARDB
|
|
UBOOT_CONFIG:=ls1088ardb_tfa
|
|
endef
|
|
|
|
|
|
define U-Boot/ls1088ardb-sdboot
|
|
NAME:=NXP LS1088ARDB SD Card Boot
|
|
UBOOT_CONFIG:=ls1088ardb_tfa
|
|
endef
|
|
|
|
define U-Boot/ls2088ardb
|
|
NAME:=NXP LS2088ARDB
|
|
UBOOT_CONFIG:=ls2088ardb_tfa
|
|
endef
|
|
|
|
define U-Boot/ls1021atwr
|
|
NAME:=NXP LS1021ATWR
|
|
BUILD_SUBTARGET:=armv7
|
|
UBOOT_CONFIG:=ls1021atwr_nor
|
|
ENV_SIZE:=0x20000
|
|
endef
|
|
|
|
define U-Boot/ls1021atwr-sdboot
|
|
NAME:=NXP LS1021ATWR SD Card Boot
|
|
BUILD_SUBTARGET:=armv7
|
|
UBOOT_CONFIG:=ls1021atwr_sdcard_ifc
|
|
UBOOT_IMAGE:=u-boot-with-spl-pbl.bin
|
|
ENV_SIZE:=0x20000
|
|
endef
|
|
|
|
define U-Boot/ls1021aiot-sdboot
|
|
NAME:=NXP LS1021AIOT SD Card Boot
|
|
BUILD_SUBTARGET:=armv7
|
|
UBOOT_CONFIG:=ls1021aiot_sdcard
|
|
UBOOT_IMAGE:=u-boot-with-spl-pbl.bin
|
|
ENV_SIZE:=0x2000
|
|
endef
|
|
|
|
|
|
UBOOT_TARGETS := \
|
|
ls1012afrdm \
|
|
ls1012ardb \
|
|
ls1012afrwy \
|
|
ls1043ardb \
|
|
ls1043ardb-sdboot \
|
|
ls1046ardb \
|
|
ls1046ardb-sdboot \
|
|
ls1088ardb \
|
|
ls1088ardb-sdboot \
|
|
ls2088ardb \
|
|
ls1021atwr \
|
|
ls1021atwr-sdboot \
|
|
ls1021aiot-sdboot
|
|
|
|
define Build/InstallDev
|
|
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
|
|
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) \
|
|
$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin
|
|
$(PKG_BUILD_DIR)/tools/mkenvimage -s $(ENV_SIZE) \
|
|
-o $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot-env.bin \
|
|
files/$(BUILD_VARIANT)-uEnv.txt
|
|
endef
|
|
|
|
define Package/u-boot/install/default
|
|
endef
|
|
|
|
$(eval $(call BuildPackage/U-Boot))
|