mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
2317a7426e
Build system: x86_64 Build-tested: generic, smp Run-tested: generic/AR-5387un, smp/VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
248 lines
6.6 KiB
Diff
248 lines
6.6 KiB
Diff
From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
|
|
From: Jonas Gorski <jonas.gorski@gmail.com>
|
|
Date: Fri, 6 Jan 2012 12:24:18 +0100
|
|
Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
|
|
|
|
Only connect/disconnect the phy during probe and remove, not during any
|
|
open/close. The phy seldom changes during the runtime, and disconnecting
|
|
the phy during close will prevent it from keeping any configuration over
|
|
a down/up cycle.
|
|
|
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
---
|
|
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
|
|
1 file changed, 78 insertions(+), 80 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
|
|
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
|
|
@@ -892,10 +892,8 @@ static int bcm_enet_open(struct net_devi
|
|
struct bcm_enet_priv *priv;
|
|
struct sockaddr addr;
|
|
struct device *kdev;
|
|
- struct phy_device *phydev;
|
|
int i, ret;
|
|
unsigned int size;
|
|
- char phy_id[MII_BUS_ID_SIZE + 3];
|
|
void *p;
|
|
u32 val;
|
|
|
|
@@ -903,31 +901,10 @@ static int bcm_enet_open(struct net_devi
|
|
kdev = &priv->pdev->dev;
|
|
|
|
if (priv->has_phy) {
|
|
- /* connect to PHY */
|
|
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
|
|
- priv->mii_bus->id, priv->phy_id);
|
|
-
|
|
- phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
|
|
- PHY_INTERFACE_MODE_MII);
|
|
-
|
|
- if (IS_ERR(phydev)) {
|
|
- dev_err(kdev, "could not attach to PHY\n");
|
|
- return PTR_ERR(phydev);
|
|
- }
|
|
-
|
|
- /* mask with MAC supported features */
|
|
- phy_support_sym_pause(phydev);
|
|
- phy_set_max_speed(phydev, SPEED_100);
|
|
- phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
|
|
- priv->pause_auto);
|
|
-
|
|
- phy_attached_info(phydev);
|
|
-
|
|
+ /* Reset state */
|
|
priv->old_link = 0;
|
|
priv->old_duplex = -1;
|
|
priv->old_pause = -1;
|
|
- } else {
|
|
- phydev = NULL;
|
|
}
|
|
|
|
/* mask all interrupts and request them */
|
|
@@ -937,7 +914,7 @@ static int bcm_enet_open(struct net_devi
|
|
|
|
ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
|
|
if (ret)
|
|
- goto out_phy_disconnect;
|
|
+ return ret;
|
|
|
|
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
|
|
dev->name, dev);
|
|
@@ -1099,8 +1076,8 @@ static int bcm_enet_open(struct net_devi
|
|
enet_dmac_writel(priv, priv->dma_chan_int_mask,
|
|
ENETDMAC_IRMASK, priv->tx_chan);
|
|
|
|
- if (phydev)
|
|
- phy_start(phydev);
|
|
+ if (priv->has_phy)
|
|
+ phy_start(dev->phydev);
|
|
else
|
|
bcm_enet_adjust_link(dev);
|
|
|
|
@@ -1130,10 +1107,6 @@ out_freeirq_rx:
|
|
out_freeirq:
|
|
free_irq(dev->irq, dev);
|
|
|
|
-out_phy_disconnect:
|
|
- if (phydev)
|
|
- phy_disconnect(phydev);
|
|
-
|
|
return ret;
|
|
}
|
|
|
|
@@ -1226,10 +1199,6 @@ static int bcm_enet_stop(struct net_devi
|
|
free_irq(priv->irq_rx, dev);
|
|
free_irq(dev->irq, dev);
|
|
|
|
- /* release phy */
|
|
- if (priv->has_phy)
|
|
- phy_disconnect(dev->phydev);
|
|
-
|
|
/* reset BQL after forced tx reclaim to prevent kernel panic */
|
|
netdev_reset_queue(dev);
|
|
|
|
@@ -1797,14 +1766,47 @@ static int bcm_enet_probe(struct platfor
|
|
|
|
/* do minimal hardware init to be able to probe mii bus */
|
|
bcm_enet_hw_preinit(priv);
|
|
+ spin_lock_init(&priv->rx_lock);
|
|
+
|
|
+ /* init rx timeout (used for oom) */
|
|
+ timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
|
|
+
|
|
+ /* init the mib update lock&work */
|
|
+ mutex_init(&priv->mib_update_lock);
|
|
+ INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
|
|
+
|
|
+ /* zero mib counters */
|
|
+ for (i = 0; i < ENET_MIB_REG_COUNT; i++)
|
|
+ enet_writel(priv, 0, ENET_MIB_REG(i));
|
|
+
|
|
+ /* register netdevice */
|
|
+ dev->netdev_ops = &bcm_enet_ops;
|
|
+ netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
|
|
+
|
|
+ dev->ethtool_ops = &bcm_enet_ethtool_ops;
|
|
+ /* MTU range: 46 - 2028 */
|
|
+ dev->min_mtu = ETH_ZLEN - ETH_HLEN;
|
|
+ dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
|
|
+ SET_NETDEV_DEV(dev, &pdev->dev);
|
|
+
|
|
+ ret = register_netdev(dev);
|
|
+ if (ret)
|
|
+ goto out_uninit_hw;
|
|
+
|
|
+ netif_carrier_off(dev);
|
|
+ platform_set_drvdata(pdev, dev);
|
|
+ priv->pdev = pdev;
|
|
+ priv->net_dev = dev;
|
|
|
|
/* MII bus registration */
|
|
if (priv->has_phy) {
|
|
+ struct phy_device *phydev;
|
|
+ char phy_id[MII_BUS_ID_SIZE + 3];
|
|
|
|
priv->mii_bus = mdiobus_alloc();
|
|
if (!priv->mii_bus) {
|
|
ret = -ENOMEM;
|
|
- goto out_uninit_hw;
|
|
+ goto out_unregister_netdev;
|
|
}
|
|
|
|
bus = priv->mii_bus;
|
|
@@ -1828,6 +1830,26 @@ static int bcm_enet_probe(struct platfor
|
|
dev_err(&pdev->dev, "unable to register mdio bus\n");
|
|
goto out_free_mdio;
|
|
}
|
|
+
|
|
+ /* connect to PHY */
|
|
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
|
|
+ priv->mii_bus->id, priv->phy_id);
|
|
+
|
|
+ phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
|
|
+ PHY_INTERFACE_MODE_MII);
|
|
+
|
|
+ if (IS_ERR(phydev)) {
|
|
+ dev_err(&pdev->dev, "could not attach to PHY\n");
|
|
+ goto out_unregister_mdio;
|
|
+ }
|
|
+
|
|
+ /* mask with MAC supported features */
|
|
+ phy_support_sym_pause(phydev);
|
|
+ phy_set_max_speed(phydev, SPEED_100);
|
|
+ phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
|
|
+ priv->pause_auto);
|
|
+
|
|
+ phy_attached_info(phydev);
|
|
} else {
|
|
|
|
/* run platform code to initialize PHY device */
|
|
@@ -1835,45 +1857,16 @@ static int bcm_enet_probe(struct platfor
|
|
pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
|
|
bcm_enet_mdio_write_mii)) {
|
|
dev_err(&pdev->dev, "unable to configure mdio bus\n");
|
|
- goto out_uninit_hw;
|
|
+ goto out_unregister_netdev;
|
|
}
|
|
}
|
|
|
|
- spin_lock_init(&priv->rx_lock);
|
|
-
|
|
- /* init rx timeout (used for oom) */
|
|
- timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
|
|
-
|
|
- /* init the mib update lock&work */
|
|
- mutex_init(&priv->mib_update_lock);
|
|
- INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
|
|
-
|
|
- /* zero mib counters */
|
|
- for (i = 0; i < ENET_MIB_REG_COUNT; i++)
|
|
- enet_writel(priv, 0, ENET_MIB_REG(i));
|
|
-
|
|
- /* register netdevice */
|
|
- dev->netdev_ops = &bcm_enet_ops;
|
|
- netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
|
|
-
|
|
- dev->ethtool_ops = &bcm_enet_ethtool_ops;
|
|
- /* MTU range: 46 - 2028 */
|
|
- dev->min_mtu = ETH_ZLEN - ETH_HLEN;
|
|
- dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
|
|
- SET_NETDEV_DEV(dev, &pdev->dev);
|
|
-
|
|
- ret = register_netdev(dev);
|
|
- if (ret)
|
|
- goto out_unregister_mdio;
|
|
-
|
|
- netif_carrier_off(dev);
|
|
- platform_set_drvdata(pdev, dev);
|
|
- priv->pdev = pdev;
|
|
- priv->net_dev = dev;
|
|
-
|
|
return 0;
|
|
|
|
out_unregister_mdio:
|
|
+ if (dev->phydev)
|
|
+ phy_disconnect(dev->phydev);
|
|
+
|
|
if (priv->mii_bus)
|
|
mdiobus_unregister(priv->mii_bus);
|
|
|
|
@@ -1881,6 +1874,9 @@ out_free_mdio:
|
|
if (priv->mii_bus)
|
|
mdiobus_free(priv->mii_bus);
|
|
|
|
+out_unregister_netdev:
|
|
+ unregister_netdev(dev);
|
|
+
|
|
out_uninit_hw:
|
|
/* turn off mdc clock */
|
|
enet_writel(priv, 0, ENET_MIISC_REG);
|
|
@@ -1911,6 +1907,7 @@ static int bcm_enet_remove(struct platfo
|
|
enet_writel(priv, 0, ENET_MIISC_REG);
|
|
|
|
if (priv->has_phy) {
|
|
+ phy_disconnect(dev->phydev);
|
|
mdiobus_unregister(priv->mii_bus);
|
|
mdiobus_free(priv->mii_bus);
|
|
} else {
|