mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
4ed209326b
Siflower SF19A2890 is an SoC with: Dual-core MIPS InterAptiv at 800MHz DDR3 controller One Gigabit Ethernet MAC with RGMII and IPv4 HNAT engine Built-in 2x2 11N + 2x2 11AC WiFi radio USB 2.0 OTG I2C/SPI/GPIO and various other peripherals This PR adds support for SF19A2890 EVB with ethernet support. EVB spec: Memory: DDR3 128M Ethernet: RTL8367RB 5-port gigabit switch Flash: 16M NOR Others: MicroUSB OTG, LED x 1, Reset button x1 The built image can be flashed using u-boot recovery. This target is marked as source-only until support for a commercial router board comes. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
516 lines
12 KiB
C
516 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Siflower SF19A2890 pinctrl.
|
|
*
|
|
* Based on:
|
|
* Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
|
|
*
|
|
* Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
|
|
*/
|
|
|
|
#include <linux/bitmap.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/types.h>
|
|
|
|
#define MODULE_NAME "sf19a2890-pinctrl"
|
|
|
|
struct sf_pinctrl {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
|
|
struct pinctrl_dev *pctl_dev;
|
|
struct pinctrl_desc pctl_desc;
|
|
struct pinctrl_gpio_range gpio_range;
|
|
};
|
|
|
|
#define SF19A28_NUM_GPIOS 49
|
|
|
|
#define SF19A28_REG_PC(pin) ((pin) * 0x8)
|
|
#define PC_OEN BIT(7)
|
|
#define PC_ST BIT(6)
|
|
#define PC_IE BIT(5)
|
|
#define PC_PD BIT(4)
|
|
#define PC_PU BIT(3)
|
|
#define PC_DS GENMASK(2, 0)
|
|
|
|
#define DRIVE_MIN 6
|
|
#define DRIVE_STEP 3
|
|
#define DRIVE_MAX (7 * DRIVE_STEP)
|
|
|
|
#define SF19A28_REG_PMX(pin) ((pin) * 0x8 + 0x4)
|
|
/*
|
|
* FUNC_SW:
|
|
* 0: Override pad output enable with PC_OEN
|
|
* 1: take OEN from GPIO or alternative function
|
|
* FMUX_SEL:
|
|
* 0: Alternative function mode
|
|
* 1: GPIO mode
|
|
*/
|
|
#define PMX_FUNC_SW BIT(3)
|
|
#define PMX_FMUX_SEL BIT(2)
|
|
#define PMX_MODE GENMASK(1, 0)
|
|
|
|
static struct pinctrl_pin_desc sf19a2890_gpio_pins[] = {
|
|
PINCTRL_PIN(0, "JTAG_TDO"),
|
|
PINCTRL_PIN(1, "JTAG_TDI"),
|
|
PINCTRL_PIN(2, "JTAG_TMS"),
|
|
PINCTRL_PIN(3, "JTAG_TCK"),
|
|
PINCTRL_PIN(4, "JTAG_RST"),
|
|
PINCTRL_PIN(5, "SPI_TXD"),
|
|
PINCTRL_PIN(6, "SPI_RXD"),
|
|
PINCTRL_PIN(7, "SPI_CLK"),
|
|
PINCTRL_PIN(8, "SPI_CSN"),
|
|
PINCTRL_PIN(9, "UART_TX"),
|
|
PINCTRL_PIN(10, "UART_RX"),
|
|
PINCTRL_PIN(11, "I2C_DAT"),
|
|
PINCTRL_PIN(12, "I2C_CLK"),
|
|
PINCTRL_PIN(13, "RGMII_GTX_CLK"),
|
|
PINCTRL_PIN(14, "RGMII_TXCLK"),
|
|
PINCTRL_PIN(15, "RGMII_TXD0"),
|
|
PINCTRL_PIN(16, "RGMII_TXD1"),
|
|
PINCTRL_PIN(17, "RGMII_TXD2"),
|
|
PINCTRL_PIN(18, "RGMII_TXD3"),
|
|
PINCTRL_PIN(19, "RGMII_TXCTL"),
|
|
PINCTRL_PIN(20, "RGMII_RXCLK"),
|
|
PINCTRL_PIN(21, "RGMII_RXD0"),
|
|
PINCTRL_PIN(22, "RGMII_RXD1"),
|
|
PINCTRL_PIN(23, "RGMII_RXD2"),
|
|
PINCTRL_PIN(24, "RGMII_RXD3"),
|
|
PINCTRL_PIN(25, "RGMII_RXCTL"),
|
|
PINCTRL_PIN(26, "RGMII_COL"),
|
|
PINCTRL_PIN(27, "RGMII_CRS"),
|
|
PINCTRL_PIN(28, "RGMII_MDC"),
|
|
PINCTRL_PIN(29, "RGMII_MDIO"),
|
|
PINCTRL_PIN(30, "HB0_PA_EN"),
|
|
PINCTRL_PIN(31, "HB0_LNA_EN"),
|
|
PINCTRL_PIN(32, "HB0_SW_CTRL0"),
|
|
PINCTRL_PIN(33, "HB0_SW_CTRL1"),
|
|
PINCTRL_PIN(34, "HB1_PA_EN"),
|
|
PINCTRL_PIN(35, "HB1_LNA_EN"),
|
|
PINCTRL_PIN(36, "HB1_SW_CTRL0"),
|
|
PINCTRL_PIN(37, "HB1_SW_CTRL1"),
|
|
PINCTRL_PIN(38, "LB0_PA_EN"),
|
|
PINCTRL_PIN(39, "LB0_LNA_EN"),
|
|
PINCTRL_PIN(40, "LB0_SW_CTRL0"),
|
|
PINCTRL_PIN(41, "LB0_SW_CTRL1"),
|
|
PINCTRL_PIN(42, "LB1_PA_EN"),
|
|
PINCTRL_PIN(43, "LB1_LNA_EN"),
|
|
PINCTRL_PIN(44, "LB1_SW_CTRL0"),
|
|
PINCTRL_PIN(45, "LB1_SW_CTRL1"),
|
|
PINCTRL_PIN(46, "CLK_OUT"),
|
|
PINCTRL_PIN(47, "EXT_CLK_IN"),
|
|
PINCTRL_PIN(48, "DRVVBUS0"),
|
|
};
|
|
|
|
static const char * const sf19a2890_gpio_groups[] = {
|
|
"JTAG_TDO",
|
|
"JTAG_TDI",
|
|
"JTAG_TMS",
|
|
"JTAG_TCK",
|
|
"JTAG_RST",
|
|
"SPI_TXD",
|
|
"SPI_RXD",
|
|
"SPI_CLK",
|
|
"SPI_CSN",
|
|
"UART_TX",
|
|
"UART_RX",
|
|
"I2C_DAT",
|
|
"I2C_CLK",
|
|
"RGMII_GTX_CLK",
|
|
"RGMII_TXCLK",
|
|
"RGMII_TXD0",
|
|
"RGMII_TXD1",
|
|
"RGMII_TXD2",
|
|
"RGMII_TXD3",
|
|
"RGMII_TXCTL",
|
|
"RGMII_RXCLK",
|
|
"RGMII_RXD0",
|
|
"RGMII_RXD1",
|
|
"RGMII_RXD2",
|
|
"RGMII_RXD3",
|
|
"RGMII_RXCTL",
|
|
"RGMII_COL",
|
|
"RGMII_CRS",
|
|
"RGMII_MDC",
|
|
"RGMII_MDIO",
|
|
"HB0_PA_EN",
|
|
"HB0_LNA_EN",
|
|
"HB0_SW_CTRL0",
|
|
"HB0_SW_CTRL1",
|
|
"HB1_PA_EN",
|
|
"HB1_LNA_EN",
|
|
"HB1_SW_CTRL0",
|
|
"HB1_SW_CTRL1",
|
|
"LB0_PA_EN",
|
|
"LB0_LNA_EN",
|
|
"LB0_SW_CTRL0",
|
|
"LB0_SW_CTRL1",
|
|
"LB1_PA_EN",
|
|
"LB1_LNA_EN",
|
|
"LB1_SW_CTRL0",
|
|
"LB1_SW_CTRL1",
|
|
"CLK_OUT",
|
|
"EXT_CLK_IN",
|
|
"DRVVBUS0",
|
|
};
|
|
|
|
#define SF19A28_FUNC0 0
|
|
#define SF19A28_FUNC1 1
|
|
#define SF19A28_FUNC2 2
|
|
#define SF19A28_FUNC3 3
|
|
#define SF19A28_NUM_FUNCS 4
|
|
|
|
static const char * const sf19a2890_functions[] = {
|
|
"func0", "func1", "func2", "func3"
|
|
};
|
|
|
|
static inline u32 sf_pinctrl_rd(struct sf_pinctrl *pc, ulong reg)
|
|
{
|
|
return readl(pc->base + reg);
|
|
}
|
|
|
|
static inline void sf_pinctrl_wr(struct sf_pinctrl *pc, ulong reg, u32 val)
|
|
{
|
|
writel(val, pc->base + reg);
|
|
}
|
|
|
|
static inline void sf_pinctrl_rmw(struct sf_pinctrl *pc, ulong reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
u32 val;
|
|
|
|
val = sf_pinctrl_rd(pc, reg);
|
|
val &= ~clr;
|
|
val |= set;
|
|
sf_pinctrl_wr(pc, reg, val);
|
|
}
|
|
|
|
static int sf19a2890_pctl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return SF19A28_NUM_GPIOS;
|
|
}
|
|
|
|
static const char *sf19a2890_pctl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return sf19a2890_gpio_groups[selector];
|
|
}
|
|
|
|
static int sf19a2890_pctl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
*pins = &sf19a2890_gpio_pins[selector].number;
|
|
*num_pins = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sf19a2890_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s, unsigned offset)
|
|
{
|
|
struct sf_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
u32 conf = sf_pinctrl_rd(pc, SF19A28_REG_PC(offset));
|
|
u32 mux = sf_pinctrl_rd(pc, SF19A28_REG_PMX(offset));
|
|
|
|
if (!(mux & PMX_FUNC_SW))
|
|
seq_puts(s, "Forced OE");
|
|
else if (mux & PMX_FMUX_SEL)
|
|
seq_puts(s, "GPIO");
|
|
else
|
|
seq_printf(s, "Func%lu", mux & PMX_MODE);
|
|
seq_puts(s, " |");
|
|
|
|
if (!(conf & PC_OEN) && !(mux & PMX_FUNC_SW))
|
|
seq_puts(s, " Output");
|
|
if ((conf & PC_ST))
|
|
seq_puts(s, " Schmitt_Trigger");
|
|
if ((conf & PC_IE))
|
|
seq_puts(s, " Input");
|
|
if ((conf & PC_PD))
|
|
seq_puts(s, " Pull_Down");
|
|
if ((conf & PC_PU))
|
|
seq_puts(s, " Pull_Up");
|
|
|
|
seq_printf(s, " Drive: %lu mA",
|
|
DRIVE_MIN + (conf & PC_DS) * DRIVE_STEP);
|
|
}
|
|
|
|
static const struct pinctrl_ops sf19a2890_pctl_ops = {
|
|
.get_groups_count = sf19a2890_pctl_get_groups_count,
|
|
.get_group_name = sf19a2890_pctl_get_group_name,
|
|
.get_group_pins = sf19a2890_pctl_get_group_pins,
|
|
.pin_dbg_show = sf19a2890_pctl_pin_dbg_show,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
|
|
.dt_free_map = pinconf_generic_dt_free_map,
|
|
};
|
|
|
|
static int sf19a2890_pmx_free(struct pinctrl_dev *pctldev, unsigned offset)
|
|
{
|
|
struct sf_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
sf_pinctrl_rmw(pc, SF19A28_REG_PC(offset), PC_IE, PC_OEN);
|
|
sf_pinctrl_rmw(pc, SF19A28_REG_PMX(offset), PMX_FUNC_SW, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int sf19a2890_pmx_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return SF19A28_NUM_FUNCS;
|
|
}
|
|
|
|
static const char *sf19a2890_pmx_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return sf19a2890_functions[selector];
|
|
}
|
|
|
|
static int sf19a2890_pmx_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const char *const **groups,
|
|
unsigned *const num_groups)
|
|
{
|
|
/* every pin can do every function */
|
|
*groups = sf19a2890_gpio_groups;
|
|
*num_groups = SF19A28_NUM_GPIOS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sf19a2890_pmx_set(struct pinctrl_dev *pctldev,
|
|
unsigned func_selector, unsigned group_selector)
|
|
{
|
|
struct sf_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned pin = group_selector;
|
|
|
|
sf_pinctrl_wr(pc, SF19A28_REG_PMX(pin),
|
|
PMX_FUNC_SW | FIELD_PREP(PMX_MODE, func_selector));
|
|
return 0;
|
|
}
|
|
|
|
static int sf19a2890_pmx_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct sf_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
/* Set to GPIO mode & Let peripheral control OEN */
|
|
sf_pinctrl_wr(pc, SF19A28_REG_PMX(offset), PMX_FUNC_SW | PMX_FMUX_SEL);
|
|
/*
|
|
* Set PC_IE regardless of whether GPIO is in input mode.
|
|
* Otherwise GPIO driver can't read back its status in output mode.
|
|
*/
|
|
sf_pinctrl_rmw(pc, SF19A28_REG_PC(offset), 0, PC_IE);
|
|
return 0;
|
|
}
|
|
|
|
static void sf19a2890_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
sf19a2890_pmx_free(pctldev, offset);
|
|
}
|
|
|
|
static const struct pinmux_ops sf19a2890_pmx_ops = {
|
|
.free = sf19a2890_pmx_free,
|
|
.get_functions_count = sf19a2890_pmx_get_functions_count,
|
|
.get_function_name = sf19a2890_pmx_get_function_name,
|
|
.get_function_groups = sf19a2890_pmx_get_function_groups,
|
|
.set_mux = sf19a2890_pmx_set,
|
|
.gpio_request_enable = sf19a2890_pmx_gpio_request_enable,
|
|
.gpio_disable_free = sf19a2890_pmx_gpio_disable_free,
|
|
};
|
|
|
|
static int sf19a2890_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned long *config)
|
|
{
|
|
struct sf_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
u32 arg = 0;
|
|
u32 val = 0;
|
|
|
|
if (pin >= SF19A28_NUM_GPIOS)
|
|
return -EINVAL;
|
|
|
|
val = sf_pinctrl_rd(pc, SF19A28_REG_PC(pin));
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_SCHMITT:
|
|
val &= PC_ST;
|
|
if (val)
|
|
arg = 1;
|
|
break;
|
|
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
val &= PC_IE;
|
|
if (val)
|
|
arg = 1;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
val &= PC_PD;
|
|
if (val)
|
|
arg = 1;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
val &= PC_PU;
|
|
if (val)
|
|
arg = 1;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
arg = DRIVE_MIN + (val & PC_DS) * DRIVE_STEP;
|
|
break;
|
|
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
return 0;
|
|
}
|
|
|
|
static int sf19a2890_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
struct sf_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param;
|
|
u32 arg, val;
|
|
int i;
|
|
|
|
val = sf_pinctrl_rd(pc, SF19A28_REG_PC(pin));
|
|
|
|
if (pin >= SF19A28_NUM_GPIOS)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
if (arg)
|
|
val |= PC_ST;
|
|
else
|
|
val &= ~PC_ST;
|
|
break;
|
|
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
if (arg)
|
|
val |= PC_IE;
|
|
else
|
|
val &= ~PC_IE;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (arg) {
|
|
val |= PC_PD;
|
|
val &= ~PC_PU;
|
|
} else {
|
|
val &= ~PC_PD;
|
|
}
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (arg) {
|
|
val |= PC_PU;
|
|
val &= ~PC_PD;
|
|
} else {
|
|
val &= ~PC_PU;
|
|
}
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
val &= ~PC_DS;
|
|
if (arg > DRIVE_MAX)
|
|
val |= PC_DS;
|
|
else if (arg > DRIVE_MIN)
|
|
val |= FIELD_PREP(PC_DS, (arg - DRIVE_MIN) /
|
|
DRIVE_STEP);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
sf_pinctrl_wr(pc, SF19A28_REG_PC(pin), val);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops sf19a2890_pinconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_get = sf19a2890_pinconf_get,
|
|
.pin_config_set = sf19a2890_pinconf_set,
|
|
};
|
|
|
|
static const struct pinctrl_desc sf19a2890_pinctrl_desc = {
|
|
.name = MODULE_NAME,
|
|
.pins = sf19a2890_gpio_pins,
|
|
.npins = SF19A28_NUM_GPIOS,
|
|
.pctlops = &sf19a2890_pctl_ops,
|
|
.pmxops = &sf19a2890_pmx_ops,
|
|
.confops = &sf19a2890_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct pinctrl_gpio_range sf_pinctrl_gpio_range = {
|
|
.name = MODULE_NAME,
|
|
.npins = SF19A28_NUM_GPIOS,
|
|
};
|
|
|
|
static const struct of_device_id sf_pinctrl_match[] = {
|
|
{ .compatible = "siflower,sf19a2890-pinctrl" },
|
|
{}
|
|
};
|
|
|
|
static int sf_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sf_pinctrl *pc;
|
|
|
|
pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
|
if (!pc)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, pc);
|
|
pc->dev = dev;
|
|
|
|
pc->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pc->base))
|
|
return PTR_ERR(pc->base);
|
|
|
|
pc->pctl_desc = sf19a2890_pinctrl_desc;
|
|
pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
|
if (IS_ERR(pc->pctl_dev))
|
|
return PTR_ERR(pc->pctl_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sf_pinctrl_driver = {
|
|
.probe = sf_pinctrl_probe,
|
|
.driver = {
|
|
.name = MODULE_NAME,
|
|
.of_match_table = sf_pinctrl_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
module_platform_driver(sf_pinctrl_driver);
|
|
|
|
MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>");
|
|
MODULE_DESCRIPTION("Siflower SF19A2890 pinctrl driver");
|
|
MODULE_LICENSE("GPL");
|