mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
ee8df790ca
This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X v1. Stock U-Boot UBI size: 50 MiB OpenWrt U-boot UBI size: 126 MiB Install ------- 1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10, 12 and 14). Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation 2. Make backups: ``` cat /dev/mtd0 > /tmp/boot.bin cat /dev/mtd5 > /tmp/tp_data.bin ``` Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to your PC using scp. You can also backup the remaining partititons. Copy backups to a safe place, they are required for the next steps and stock firmware recovery. 3. Reboot to OpenWrt initramfs: ``` reboot ``` 4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin, ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from /tp_data backup) to the /tmp folder of the router using scp. 5. Prepare UBI: ``` ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3 ubimkvol /dev/ubi0 -N fip -t static -s 1MiB ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000 ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000 ``` 6. Install kmod-mtd-rw and unlock partitions: ``` opkg update && opkg install kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 mtd unlock boot mtd unlock bl2 mtd unlock factory ``` 7. Prepare "factory" partition: ``` dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc dd if=/tmp/default-mac >> /tmp/factory.bin ``` 8. Write "factory" partition: ``` mtd erase factory mtd write /tmp/factory.bin factory ``` 9. Write preloader partition: ``` mtd erase bl2 mtd write /tmp/ubi-preloader.bin bl2 ``` 10. Write OpenWrt sysupgrade image: ``` sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb ``` Recovery -------- 1. Place OpenWrt initramfs-recovery.itb image (with original name) on the tftp server (IP: 192.168.1.254). 2. Press "reset" button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery. BL2 and FIP recovery -------------------- Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed: Link: https://github.com/981213/mtk_uartboot Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial Return to stock: ---------------- 1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router using scp. 2. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 3. Restore stock U-Boot: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock boot mtd erase boot mtd write /tmp/boot.bin boot ``` 4. Erase UBI and reboot: ``` mtd erase ubi reboot ``` 5. Open U-Boot web recovery, upload stock firmware image and start upgrade. Link: http://192.168.1.1 6. Complete steps 1-9 of the OpenWrt installation guide to get root rights. Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation 7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of the router using scp. 8. Restore stock calibrations: ``` mtd write /tmp/tp_data.bin tp_data reboot ``` 9. Perform "factory restore" via stock firmware web interface. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16744 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
148 lines
3.6 KiB
Plaintext
148 lines
3.6 KiB
Plaintext
#
|
|
# Copyright (C) 2021 OpenWrt.org
|
|
#
|
|
|
|
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
ubootenv_add_mmc_default() {
|
|
local envdev="$(find_mmc_part "ubootenv" "${1:-mmcblk0}")"
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
|
|
ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
|
|
}
|
|
|
|
ubootenv_add_nor_default() {
|
|
local envdev="/dev/mtd$(find_mtd_index "u-boot-env")"
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
|
|
ubootenv_add_uci_config "$envdev" "0x20000" "0x20000" "0x20000" "1"
|
|
}
|
|
|
|
ubootenv_add_ubi_default() {
|
|
. /lib/upgrade/nand.sh
|
|
local envubi=$(nand_find_ubi ubi)
|
|
local envdev=/dev/$(nand_find_volume $envubi ubootenv)
|
|
local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x1f000" "1"
|
|
ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x1f000" "1"
|
|
}
|
|
|
|
case "$board" in
|
|
abt,asr3000|\
|
|
h3c,magic-nx30-pro|\
|
|
jcg,q30-pro|\
|
|
mercusys,mr90x-v1-ubi|\
|
|
netcore,n60|\
|
|
nokia,ea0326gmp|\
|
|
qihoo,360t7|\
|
|
routerich,ax3000-ubootmod|\
|
|
tplink,tl-xdr4288|\
|
|
tplink,tl-xdr6086|\
|
|
tplink,tl-xdr6088|\
|
|
tplink,tl-xtr8488|\
|
|
xiaomi,mi-router-ax3000t-ubootmod|\
|
|
xiaomi,mi-router-wr30u-ubootmod|\
|
|
xiaomi,redmi-router-ax6000-ubootmod|\
|
|
zyxel,ex5601-t0-ubootmod)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
acer,predator-w6|\
|
|
acer,predator-w6d|\
|
|
acer,vero-w6m|\
|
|
glinet,gl-mt2500|\
|
|
glinet,gl-mt6000|\
|
|
glinet,gl-x3000|\
|
|
glinet,gl-xe3000)
|
|
local envdev=$(find_mmc_part "u-boot-env")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
|
|
;;
|
|
asus,rt-ax59u)
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
|
|
;;
|
|
bananapi,bpi-r3|\
|
|
bananapi,bpi-r3-mini|\
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-poe|\
|
|
cmcc,rax3000m|\
|
|
jdcloud,re-cp-03)
|
|
. /lib/upgrade/fit.sh
|
|
export_fitblk_bootdev
|
|
case "$CI_METHOD" in
|
|
ubi)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
emmc)
|
|
bootdev=${EMMC_KERN_DEV%%p[0-9]*}
|
|
ubootenv_add_mmc_default "${bootdev#/dev/}"
|
|
;;
|
|
default)
|
|
ubootenv_add_nor_default
|
|
;;
|
|
esac
|
|
;;
|
|
comfast,cf-e393ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
|
|
;;
|
|
cetron,ct3003|\
|
|
edgecore,eap111|\
|
|
netgear,wax220|\
|
|
zbtlink,zbt-z8102ax|\
|
|
zbtlink,zbt-z8103ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
|
;;
|
|
dlink,aquila-pro-ai-m30-a1)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
|
;;
|
|
gatonetworks,gdsp)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
glinet,gl-mt3000)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
|
;;
|
|
mercusys,mr90x-v1|\
|
|
routerich,ax3000|\
|
|
tplink,re6000xd)
|
|
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
|
|
;;
|
|
openembed,som7981)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
|
;;
|
|
openwrt,one)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
smartrg,sdg-8733|\
|
|
smartrg,sdg-8733a|\
|
|
smartrg,sdg-8734)
|
|
local envdev=$(find_mmc_part "u-boot-env" "mmcblk0")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x8000" "0x8000"
|
|
;;
|
|
ubnt,unifi-6-plus)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
|
;;
|
|
xiaomi,mi-router-ax3000t|\
|
|
xiaomi,mi-router-wr30u-stock|\
|
|
xiaomi,redmi-router-ax6000-stock)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
|
|
;;
|
|
zyxel,ex5601-t0)
|
|
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
|
|
;;
|
|
zyxel,ex5700-telenor)
|
|
ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config
|
|
|
|
exit 0
|