mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
ee76bd11bb
SquashFS has a minimum block size of at least 1k, so we need to make sure the last data block is also at least that big. This is not an issue on NOR or SD CARD devices, since their rootfs partitions go all the way to the end of the usable space. But on NAND with ubiblock, the rootfs partition will be the exact space, rounded up to LEB size. Unfortunately, some NAND chips with small sub pages have a LEB size of x.5 kiB. This can cause the the last data block to be less than 1k, which will cause the last block to be inaccessible, causing boot failures as seen on MR24: [ 1.532960] block ubiblock0_3: created from ubi0:3(rootfs) [ 1.538457] ubiblock: device ubiblock0_3 (rootfs) set to be root filesystem [ 1.552847] SQUASHFS error: squashfs_read_data failed to read block 0x621472 [ 1.559896] squashfs: SQUASHFS error: unable to read id index table [ 1.566474] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5 Since on most NOR devices, the start of the squashfs partition is not aligned. Since the start of the rootfs_data partition there is dependend on the SquashFS size, we cannot just always pad it, as the padding could creep into the rootfs_data partition, breaking jffs2. So fix this by ensuring a squashfs rootfs is always a multiple of 1k only for UBI and NAND sysupgrade images. Fixes #2460 without affecting NOR devices. Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> |
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org