mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
7d03fdb004
It's a simple renaming thing.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit d0ee398c36)
267 lines
6.4 KiB
Diff
267 lines
6.4 KiB
Diff
From ec88a9c344d9fd8c3b11bff1f99a0b6248ae256d Mon Sep 17 00:00:00 2001
|
|
From: Christian Lamparter <chunkeey@gmail.com>
|
|
Date: Sat, 22 Aug 2020 18:19:23 +0200
|
|
Subject: [PATCH] ARM: BCM5301X: Add DT for Meraki MR32
|
|
|
|
add support for the Cisco Meraki MR32.
|
|
This is a dual-band enterprise class 802.11ac access point.
|
|
The unit was donated by Chris Blake. Thank you!
|
|
|
|
SoC: Broadcom BCM53016A1 (1 GHz, 2 cores)
|
|
RAM: 128 MiB
|
|
NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable)
|
|
ETH: 1GBit Ethernet Port - PoE
|
|
WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352)
|
|
WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352)
|
|
WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428)
|
|
|
|
BLE: Broadcom BCM20732 (ttyS1)
|
|
LEDS: 1 x Programmable RGB Status LED (driven by a PWM)
|
|
1 x White LED (GPIO)
|
|
1 x Orange LED Fault Indicator (GPIO)
|
|
2 x LAN Activity / Speed LEDs (On the RJ45 Port)
|
|
BUTTON: one Reset button
|
|
MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC)
|
|
ina219 hardware monitor (i2c)
|
|
Kensington Lock
|
|
|
|
SERIAL:
|
|
WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
|
|
The Serial setting is 115200-8-N-1. The board has a populated
|
|
right angle 1x4 0.1" pinheader.
|
|
The pinout is: VCC, RX, TX, GND.
|
|
|
|
Odd stuff:
|
|
- uart0 clock frequency is 62.5 MHz.
|
|
- The LEDs are labeled as SYS-LED1 through SYS-LED3
|
|
because of the silkscreen on the PCB.
|
|
- the original u-boot has been compiled with most functions
|
|
and commands disabled. The u-boot env isn't setup properly
|
|
either and as a result, the bcm47xxpart probing is not
|
|
working. Hence, the nand partitions are specified through a
|
|
"fixed-partition" binding.
|
|
- The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is
|
|
connected to uart2 of the SoC. The BCM20732 does not
|
|
provide a HCI. So the linux' bluetooth stack is useless.
|
|
The mock-up node with the compatible binding and
|
|
enable-gpios property is provided solely as documentation.
|
|
|
|
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 197 +++++++++++++++++++++
|
|
2 files changed, 198 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm53016-meraki-mr32.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
|
bcm47094-luxul-xwr-3150-v1.dtb \
|
|
bcm47094-netgear-r8500.dtb \
|
|
bcm47094-phicomm-k3.dtb \
|
|
+ bcm53016-meraki-mr32.dtb \
|
|
bcm94708.dtb \
|
|
bcm94709.dtb \
|
|
bcm953012er.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
|
|
@@ -0,0 +1,197 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/*
|
|
+ * Broadcom BCM470X / BCM5301X ARM platform code.
|
|
+ * DTS for Meraki MR32 / Codename: Espresso
|
|
+ *
|
|
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm4708.dtsi"
|
|
+#include "bcm5301x-nand-cs0-bch8.dtsi"
|
|
+#include <dt-bindings/leds/common.h>
|
|
+
|
|
+/ {
|
|
+ compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
|
|
+ model = "Meraki MR32";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = " console=ttyS0,115200n8 earlycon";
|
|
+ };
|
|
+
|
|
+ memory {
|
|
+ reg = <0x00000000 0x08000000>;
|
|
+ device_type = "memory";
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ serial1 = &uart2;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ sysled3 {
|
|
+ function = LED_FUNCTION_FAULT;
|
|
+ color = <LED_COLOR_ID_AMBER>;
|
|
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
|
|
+ panic-indicator;
|
|
+ };
|
|
+ sysled2 {
|
|
+ function = LED_FUNCTION_INDICATOR;
|
|
+ color = <LED_COLOR_ID_WHITE>;
|
|
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ keys {
|
|
+ compatible = "gpio-keys";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ restart {
|
|
+ label = "Reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pwm-leds {
|
|
+ compatible = "pwm-leds";
|
|
+
|
|
+ red {
|
|
+ /* SYS-LED 1 - Tricolor */
|
|
+ function = LED_FUNCTION_INDICATOR;
|
|
+ color = <LED_COLOR_ID_RED>;
|
|
+ pwms = <&pwm 0 50000 0>;
|
|
+ max-brightness = <255>;
|
|
+ };
|
|
+
|
|
+ green {
|
|
+ /* SYS-LED 1 - Tricolor */
|
|
+ function = LED_FUNCTION_POWER;
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ pwms = <&pwm 1 50000 0>;
|
|
+ max-brightness = <255>;
|
|
+ };
|
|
+
|
|
+ blue {
|
|
+ /* SYS-LED 1 - Tricolor */
|
|
+ function = LED_FUNCTION_INDICATOR;
|
|
+ color = <LED_COLOR_ID_BLUE>;
|
|
+ pwms = <&pwm 2 50000 0>;
|
|
+ max-brightness = <255>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ i2c {
|
|
+ /*
|
|
+ * The platform provided I2C does not budge.
|
|
+ * This is a replacement until I can figure
|
|
+ * out what are the missing bits...
|
|
+ */
|
|
+
|
|
+ compatible = "i2c-gpio";
|
|
+ sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
|
+ scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
|
+ i2c-gpio,delay-us = <10>; /* close to 100 kHz */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ current_sense: ina219@45 {
|
|
+ compatible = "ti,ina219";
|
|
+ reg = <0x45>;
|
|
+ shunt-resistor = <60000>; /* = 60 mOhms */
|
|
+ };
|
|
+
|
|
+ eeprom: eeprom@50 {
|
|
+ compatible = "atmel,24c64";
|
|
+ reg = <0x50>;
|
|
+ pagesize = <32>;
|
|
+ read-only;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ clock-frequency = <62500000>;
|
|
+ /delete-property/ clocks;
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+ /*
|
|
+ * bluetooth-le {
|
|
+ * compatible = "brcm,bcm20732";
|
|
+ * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
|
|
+ *};
|
|
+ */
|
|
+};
|
|
+
|
|
+&gmac1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+&gmac2 {
|
|
+ status = "disabled";
|
|
+};
|
|
+&gmac3 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pwm {
|
|
+ status = "okay";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinmux_pwm>;
|
|
+};
|
|
+
|
|
+&nandcs {
|
|
+ nand-ecc-algo = "hw";
|
|
+
|
|
+ partitions {
|
|
+ /*
|
|
+ * The partition autodetection does not work for this device.
|
|
+ * It will only detect the "nvram" partition with an incorrect size.
|
|
+ * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
|
|
+ * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0":
|
|
+ * [ 1.733117] 0x000000400000-0x000008000000 : "nvram"
|
|
+ */
|
|
+
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <0x1>;
|
|
+ #size-cells = <0x1>;
|
|
+
|
|
+ partition0@0 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x0 0x100000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition1@100000 {
|
|
+ label = "bootkernel1";
|
|
+ reg = <0x100000 0x300000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition2@400000 {
|
|
+ label = "nvram";
|
|
+ reg = <0x400000 0x100000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition3@500000 {
|
|
+ label = "bootkernel2";
|
|
+ reg = <0x500000 0x300000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition4@800000 {
|
|
+ label = "ubi";
|
|
+ reg = <0x800000 0x7780000>;
|
|
+ };
|
|
+ };
|
|
+};
|