openwrt/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt
Álvaro Fernández Rojas c3d3111831 brcmfmac43430-firmware: remove package and switch to linux-firmware
Now that the firmware for BCM43430 has been submitted to linux-firmware use it
and remove RPiDistro package.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-29 21:24:45 +02:00

67 lines
1.1 KiB
Plaintext

# NVRAM file for BCM943430WLPTH
# 2.4 GHz, 20 MHz BW mode
# The following parameter values are just placeholders, need to be updated.
manfid=0x2d0
prodid=0x0727
vendid=0x14e4
devid=0x43e2
boardtype=0x0727
boardrev=0x1101
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=11
boardflags=0x00404201
boardflags3=0x08000000
xtalfreq=37400
nocrc=1
ag0=255
aa2g=1
ccode=ALL
pa0itssit=0x20
extpagain2g=0
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
pa2ga0=-168,7161,-820
AvVmid_c0=0x0,0xc8
cckpwroffset0=5
# PPR params
maxp2ga0=84
txpwrbckof=6
cckbw202gpo=0
legofdmbw202gpo=0x66111111
mcsbw202gpo=0x77711111
propbw202gpo=0xdd
# OFDM IIR :
ofdmdigfilttype=18
ofdmdigfilttypebe=18
# PAPD mode:
papdmode=1
papdvalidtest=1
pacalidx2g=42
papdepsoffset=-22
papdendidx=58
# LTECX flags
ltecxmux=0
ltecxpadnum=0x0102
ltecxfnsel=0x44
ltecxgcigpio=0x01
il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
deadman_to=0xffffffff
# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
muxenab=0x1
# CLDO PWM voltage settings - 0x4 - 1.1 volt
#cldo_pwm=0x4
#VCO freq 326.4MHz
spurconfig=0x3
edonthd20l=-75
edoffthd20ul=-80