openwrt/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch

From 13f075999935bb696dbab63243923179f06fa05e Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 16 Jun 2022 19:56:08 +0200
Subject: [PATCH 3/4] devfreq: add ipq806x fabric scaling driver

Add ipq806x fabric scaling driver using the devfreq passive governor.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/devfreq/Kconfig               |  11 ++
 drivers/devfreq/Makefile              |   1 +
 drivers/devfreq/ipq806x-fab-devfreq.c | 155 ++++++++++++++++++++++++++
 3 files changed, 167 insertions(+)
 create mode 100644 drivers/devfreq/ipq806x-fab-devfreq.c

--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -162,6 +162,17 @@ config ARM_KRAIT_CACHE_DEVFREQ
 	  based on the max frequency across all core and the range set in the device
 	  dts. If provided this scale also the regulator attached to the l2 cache.
 
+config ARM_IPQ806X_FAB_DEVFREQ
+	tristate "Scaling support for ipq806x Soc Fabric"
+	depends on ARCH_QCOM || COMPILE_TEST
+	select DEVFREQ_GOV_PASSIVE
+	help
+	  This adds the DEVFREQ driver for the ipq806x Soc Fabric.
+
+	  The driver register with the cpufreq notifier and find the right frequency
+	  based on the max frequency across all core and the range set in the device
+	  dts.
+
 source "drivers/devfreq/event/Kconfig"
 
 endif # PM_DEVFREQ
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+=
 obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ)	+= sun8i-a33-mbus.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ)	+= krait-cache-devfreq.o
+obj-$(CONFIG_ARM_IPQ806X_FAB_DEVFREQ)	+= ipq806x-fab-devfreq.o
 
 # DEVFREQ Event Drivers
 obj-$(CONFIG_PM_DEVFREQ_EVENT)		+= event/
--- /dev/null
+++ b/drivers/devfreq/ipq806x-fab-devfreq.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/devfreq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/pm_opp.h>
+
+#include "governor.h"
+
+struct ipq806x_fab_data {
+	struct clk *fab_clk;
+	struct clk *ddr_clk;
+};
+
+static int ipq806x_fab_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct ipq806x_fab_data *data = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(data->fab_clk);
+
+	return 0;
+};
+
+static int ipq806x_fab_target(struct device *dev, unsigned long *freq,
+			      u32 flags)
+{
+	struct ipq806x_fab_data *data = dev_get_drvdata(dev);
+	struct dev_pm_opp *opp;
+	int ret;
+
+	opp = dev_pm_opp_find_freq_ceil(dev, freq);
+	if (unlikely(IS_ERR(opp)))
+		return PTR_ERR(opp);
+
+	dev_pm_opp_put(opp);
+
+	ret = clk_set_rate(data->fab_clk, *freq);
+	if (ret)
+		return ret;
+
+	return clk_set_rate(data->ddr_clk, *freq);
+};
+
+static int ipq806x_fab_get_dev_status(struct device *dev,
+				      struct devfreq_dev_status *stat)
+{
+	struct ipq806x_fab_data *data = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(data->fab_clk);
+
+	return 0;
+};
+
+static struct devfreq_dev_profile ipq806x_fab_devfreq_profile = {
+	.target = ipq806x_fab_target,
+	.get_dev_status = ipq806x_fab_get_dev_status,
+	.get_cur_freq = ipq806x_fab_get_cur_freq
+};
+
+static struct devfreq_passive_data devfreq_gov_data = {
+	.parent_type = CPUFREQ_PARENT_DEV,
+};
+
+static int ipq806x_fab_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ipq806x_fab_data *data;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	clk = devm_clk_get(dev, "apps-fab-clk");
+	if (IS_ERR(clk)) {
+		dev_err_probe(dev, PTR_ERR(clk), "failed to get apps fab clk\n");
+		return PTR_ERR(clk);
+	}
+
+	clk_prepare_enable(clk);
+	data->fab_clk = clk;
+
+	clk = devm_clk_get(dev, "ddr-fab-clk");
+	if (IS_ERR(clk)) {
+		dev_err_probe(dev, PTR_ERR(clk), "failed to get ddr fab clk\n");
+		goto err_ddr;
+	}
+
+	clk_prepare_enable(clk);
+	data->ddr_clk = clk;
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret) {
+		dev_err(dev, "failed to parse fab freq thresholds\n");
+		return ret;
+	}
+
+	dev_set_drvdata(dev, data);
+
+	devfreq = devm_devfreq_add_device(&pdev->dev, &ipq806x_fab_devfreq_profile,
+					  DEVFREQ_GOV_PASSIVE, &devfreq_gov_data);
+	if (IS_ERR(devfreq))
+		dev_pm_opp_remove_table(dev);
+
+	return PTR_ERR_OR_ZERO(devfreq);
+
+err_ddr:
+	clk_unprepare(data->fab_clk);
+	clk_put(data->fab_clk);
+	return PTR_ERR(clk);
+};
+
+static int ipq806x_fab_remove(struct platform_device *pdev)
+{
+	struct ipq806x_fab_data *data = dev_get_drvdata(&pdev->dev);
+
+	clk_unprepare(data->fab_clk);
+	clk_put(data->fab_clk);
+
+	clk_unprepare(data->ddr_clk);
+	clk_put(data->ddr_clk);
+
+	dev_pm_opp_remove_table(&pdev->dev);
+
+	return 0;
+};
+
+static const struct of_device_id ipq806x_fab_match_table[] = {
+	{ .compatible = "qcom,fab-scaling" },
+	{}
+};
+
+static struct platform_driver ipq806x_fab_driver = {
+	.probe		= ipq806x_fab_probe,
+	.remove		= ipq806x_fab_remove,
+	.driver		= {
+		.name   = "ipq806x-fab-scaling",
+		.of_match_table = ipq806x_fab_match_table,
+	},
+};
+module_platform_driver(ipq806x_fab_driver);
+
+MODULE_DESCRIPTION("ipq806x Fab Scaling driver");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL v2");