Andy Boyett bab4138b4a export ar231x_gpiodev, needed for gpio-led/spi/i2c modules ...

SVN-Revision: 16902

2009-07-18 17:52:36 +00:00

..

001-get_c0_compare_irq_function.patch

refresh patches

2009-03-24 15:09:20 +00:00

002-mips_clocksource_init_war.patch

atheros: clean up the 2.6.28 port in preparation for pushing it upstream

2009-03-22 14:46:58 +00:00

100-board.patch

export ar231x_gpiodev, needed for gpio-led/spi/i2c modules

2009-07-18 17:52:36 +00:00

105-ar2315_pci.patch

atheros: fix up the wlan mac address if the board data is missing

2009-04-21 18:48:59 +00:00

110-ar2313_ethernet.patch

atheros: ignore rx long packet error flag from the ethernet core

2009-04-13 00:43:38 +00:00

120-spiflash.patch

atheros: fix a spiflash write performance regression

2009-03-24 23:41:29 +00:00

130-watchdog.patch

atheros: clean up the 2.6.28 port in preparation for pushing it upstream

2009-03-22 14:46:58 +00:00

140-redboot_partition_scan.patch

Add initial kernel 2.6.28 support for atheros target. The include files moved from /include/asm-mips/mach-atheros/ to /arch/mips/include/asm/mach-atheros/ This patch is based on the old kernel 2.6.27 patches.

2009-02-20 16:27:42 +00:00

200-ar2313_enable_mvswitch.patch

atheros: ignore reports about oversized ethernet frames, as can be caused by the header mode of marvell 88e6060 switches (see https://dev.openwrt.org/ticket/3507#comment:16)

2009-04-10 11:27:39 +00:00

210-reset_button.patch

atheros: add back reset button support

2009-03-22 17:59:03 +00:00

220-enet_micrel_workaround.patch

atheros: add kernel workaround for bringing up eth1 on devices with a micrel switch (PHY is unconnected for ENET1, switch is not configurable through MDIO)

2009-04-28 23:27:40 +00:00