mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-31 08:25:29 +00:00
ed8f726dab
the attached patch makes ipcalc.sh accept IP/Netmask combinations in CIDR notation. Before you could only do: # sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10 IP=192.168.0.0 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 NETWORK=192.168.0.0 PREFIX=24 START=192.168.0.1 END=192.168.0.11 with this patch you can also execute it with: sh ipcalc.sh 192.168.0.0/24 1 10 IP=192.168.0.0 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 NETWORK=192.168.0.0 PREFIX=24 START=192.168.0.1 END=192.168.0.11 The patch is based on #1260 [1], i just changed one line to calculate the START end END ips right. I wonder why that never got included. If there is no reason not to do i would like to ask you to commit that patch, because its a functionality i (and probably others) miss quite often. Btw, i also fixed 4 useless tabs, that might look a bit strange in the patch. Regards, Manuel SVN-Revision: 26930
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org