openwrt/target/linux/gemini/patches-4.19/0024-ARM-dts-gemini-Fix-up-confused-pin-settings.patch
Linus Walleij 1eb851143a gemini: Fix up some confused pin config on SL93512r
Upstream patch fixing the errors in the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-17 16:57:32 +02:00

55 lines
1.8 KiB
Diff

From 384ec5ed82845c2c81968743dde4a758f572c11b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 13 Jul 2019 11:52:29 +0200
Subject: [PATCH] ARM: dts: gemini: Fix up confused pin settings
The SL93512r board has its pin muxing set up for the wrong
ASIC: SL3516 instead of SL3512 that it is using. Fix it
up and reference the right GPIO for the WPS button.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-sl93512r.dts | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -36,8 +36,8 @@
wakeup-source;
linux,code = <KEY_WPS_BUTTON>;
label = "WPS";
- /* Conflict with NAND flash */
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ /* Conflicts with TVC and extended flash */
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
button-setup {
@@ -153,17 +153,20 @@
syscon: syscon@40000000 {
pinctrl {
/*
- * gpio0egrp cover line 16 used by HD LED
- * gpio0fgrp cover line 17, 18 used by wireless LED and reset button
- * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
- * gpio0kgrp cover line 31 used by USB LED
+ * gpio0agrp cover line 0, used by WPS button
+ * gpio0fgrp cover line 16 used by HD LED
+ * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
+ * reset button OR USB ID select on 17 and USB VBUS select
+ * on 18. (Confusing.)
+ * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
*/
gpio0_default_pins: pinctrl-gpio0 {
mux {
function = "gpio0";
- groups = "gpio0egrp",
+ groups = "gpio0agrp",
"gpio0fgrp",
- "gpio0hgrp";
+ "gpio0ggrp",
+ "gpio0igrp";
};
};
/*