Jonas Gorski
ecdce239a5
brcm63xx: ensure dummy byte is set for mapped spi flash with fast read ...
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46707
2015-08-23 09:35:56 +00:00
2015-07-14 20:52:18 +00:00
2015-07-14 09:57:45 +00:00
2015-07-05 21:32:44 +00:00
2015-08-17 06:24:04 +00:00
2015-05-27 14:57:38 +00:00
2015-08-17 16:10:49 +00:00
2015-07-14 09:57:45 +00:00
2015-08-05 13:55:52 +00:00
2015-08-17 06:17:37 +00:00
2015-08-14 13:06:33 +00:00
2015-08-23 09:35:56 +00:00
2015-08-17 06:04:48 +00:00
2015-06-30 23:26:09 +00:00
2015-07-22 12:51:11 +00:00
2015-08-21 08:09:52 +00:00
2015-05-21 19:32:46 +00:00
2015-08-17 06:18:15 +00:00
2015-08-14 13:06:33 +00:00
2015-08-05 13:56:02 +00:00
2015-08-17 11:25:57 +00:00
2015-07-14 09:57:45 +00:00
2015-08-17 06:16:19 +00:00
2015-07-09 06:56:45 +00:00
2015-08-21 08:10:48 +00:00
2015-08-05 13:55:14 +00:00
2015-04-23 22:31:36 +00:00
2015-05-29 11:28:20 +00:00
2015-05-27 15:34:30 +00:00
2015-03-19 18:45:32 +00:00
2015-08-17 11:26:14 +00:00
2015-08-17 11:25:46 +00:00
2015-04-12 20:48:13 +00:00
2015-08-05 13:55:52 +00:00
2015-03-06 07:56:34 +00:00
2015-08-17 10:13:46 +00:00
2015-05-21 19:32:46 +00:00
2015-05-27 15:34:38 +00:00
2015-08-21 13:23:29 +00:00
2015-03-28 13:20:52 +00:00
2015-07-24 15:36:08 +00:00
2015-08-05 13:55:52 +00:00
ecdce239a5