Maximilian Weinmann ecdb24814f ramips: add support for SNR-CPE-ME1 ... SNR-CPE-ME1 is a wireless WiFi 5 router manufactured by SNR/NAG company. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 16 MiB (GD25Q128CSIG) - WLAN : 2.4 GHz (MediaTek MT7603EN) 5 GHz (MediaTek MT7610EN) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (in SoC) - USB : 3.0 x1 - UART : through-hole on PCB - [J4] 3.3V, RX, TX, GND (57600n8) - Power : 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME1 to recovery mode (hold the reset button while power on) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface Signed-off-by: Maximilian Weinmann <x1@disroot.org>		2023-05-07 14:44:54 +02:00
..
01_leds	ramips: add support for SNR-CPE-ME1	2023-05-07 14:44:54 +02:00
02_network	ramips: TP-Link EC330-G5u v1: switch to mac-address-ascii	2023-04-29 22:34:51 +02:00
03_gpio_switches	ramips: mt7621: TP-Link EAP235/615-Wall: add poe passthrough gpio definitions	2023-03-04 17:37:25 +01:00
05_compat-version	treewide: remove execute bit and shebang from board.d files	2021-03-06 11:30:06 +01:00