openwrt/package
Maximilian Weinmann ecdb24814f ramips: add support for SNR-CPE-ME1
SNR-CPE-ME1 is a wireless WiFi 5 router manufactured by SNR/NAG company.

Specification:
    - SoC           : MediaTek MT7621A
    - RAM           : DDR3 256 MiB
    - Flash         : SPI-NOR 16 MiB (GD25Q128CSIG)
    - WLAN          : 2.4 GHz (MediaTek MT7603EN)
                      5 GHz (MediaTek MT7610EN)
    - Ethernet      : 10/100/1000 Mbps x5
      - Switch      : MediaTek MT7530 (in SoC)
    - USB           : 3.0 x1
    - UART          : through-hole on PCB
      - [J4] 3.3V, RX, TX, GND (57600n8)
    - Power         : 12 VDC, 2 A

Flash instruction via TFTP:
    1. Boot SNR-CPE-ME1 to recovery mode
        (hold the reset button while power on)
    2. Send firmware via TFTP client:
       TFTP Server address: 192.168.1.1
       TFTP Client address: 192.168.1.131
    3. Wait ~120 seconds to complete flashing
    4. Do sysupgrade using web-interface

Signed-off-by: Maximilian Weinmann <x1@disroot.org>
2023-05-07 14:44:54 +02:00
..
base-files base-files: add 'isup' to the wifi script 2023-04-12 19:49:30 +02:00
boot ramips: add support for SNR-CPE-ME1 2023-05-07 14:44:54 +02:00
devel gperf: add from packages feed 2023-05-04 06:07:29 +02:00
firmware wireless-regdb: update to 2023.05.03 2023-05-04 06:08:24 +02:00
kernel mwlwifi: update to version 10.3.9.1-20230429 2023-05-06 14:53:55 +02:00
libs gettext-full: bootstrap to local gnulib source 2023-05-04 06:07:31 +02:00
network umbim: allow forcing DHCP/DHCPv6 configuration 2023-05-07 14:36:58 +02:00
system treewide: add support for "lto" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
utils busybox: turn on BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT for having $RANDOM 2023-04-25 22:01:20 +02:00
Makefile build: fix opkg install step for large package selection 2021-05-12 11:13:53 +02:00