openwrt/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m-intl.dts
Jo Deisenhofer ab402f3d23 ramips: Move LED definition out of included dtsi into dts
Prepare for a new target with different led definitions that wants to
include this dtsi. The resulting dtb are unchanged, verified with dtdiff

Signed-off-by: Jo Deisenhofer <jo.deisenhofer@gmail.com>
2023-01-14 19:02:20 +01:00

85 lines
1.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an_xiaomi_mi-router-4.dtsi"
/ {
compatible = "xiaomi,mi-router-4a-100m-intl", "mediatek,mt7628an-soc";
model = "Xiaomi Mi Router 4A (100M International Edition)";
aliases {
led-boot = &led_power_yellow;
led-failsafe = &led_power_yellow;
led-running = &led_power_blue;
led-upgrade = &led_power_yellow;
label-mac-device = &ethernet;
};
leds {
compatible = "gpio-leds";
led_power_blue: power_blue {
label = "blue:power";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led_power_yellow: power_yellow {
label = "yellow:power";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
wan {
label = "blue:wan";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
};
};
&partitions {
partition@60000 {
label = "overlay";
reg = <0x60000 0x200000>;
read-only;
};
partition@260000 {
label = "firmware";
reg = <0x260000 0xda0000>;
compatible = "denx,uimage";
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(-1)>;
};
&esw {
mediatek,portmap = <0x3e>;
mediatek,portdisable = <0x2a>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};