openwrt/target/linux/mediatek/dts/mt7629-iptime-a6004mx.dts
Christian Marangi 2d63d42f5e
mediatek: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:39 +01:00

299 lines
5.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7629.dtsi"
/ {
model = "ipTIME A6004MX";
compatible = "iptime,a6004mx", "mediatek,mt7629";
aliases {
led-boot = &led_cpu;
led-failsafe = &led_cpu;
led-running = &led_cpu;
led-upgrade = &led_cpu;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-override = "console=ttyS0,115200n8";
};
leds {
compatible = "gpio-leds";
led_cpu: cpu {
function = LED_FUNCTION_CPU;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&pio 57 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "orange:wlan5g";
gpios = <&pio 22 GPIO_ACTIVE_LOW>;
// linux,default-trigger = "phy0radio";
};
wlan2g {
label = "orange:wlan2g";
gpios = <&pio 21 GPIO_ACTIVE_LOW>;
// linux,default-trigger = "phy1radio";
};
wan {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "factory";
linux,code = <KEY_RESTART>;
gpios = <&pio 60 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 58 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
pinctrl-1 = <&ephy_leds_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_factory_4 3>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&phy0>;
nvmem-cells = <&macaddr_factory_4 1>;
nvmem-cell-names = "mac-address";
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
switch@2 {
compatible = "mediatek,mt7531";
reg = <2>;
reset-gpios = <&pio 28 0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
};
};
&bch {
status = "okay";
};
&snfi {
pinctrl-names = "default";
pinctrl-0 = <&serial_nand_pins>;
status = "okay";
flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
nand-ecc-engine = <&snfi>;
mediatek,bmt-v2;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "Config";
reg = <0x100000 0x40000>;
};
partition@140000 {
label = "factory";
reg = <0x140000 0x80000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@1c0000 {
label = "firmware";
reg = <0x1c0000 0x7400000>;
compatible = "denx,fit";
openwrt,fit-offset = <0x800>;
};
};
};
};
&pio {
eth_pins: eth-pins {
mux {
function = "eth";
groups = "mdc_mdio";
};
};
ephy_leds_pins: ephy-leds-pins {
mux {
function = "led";
groups = "ephy_leds";
};
};
/* Serial NAND is shared pin with SPI-NOR */
serial_nand_pins: serial-nand-pins {
mux {
function = "flash";
groups = "snfi";
};
};
uart0_pins: uart0-pins {
mux {
function = "uart";
groups = "uart0_txd_rxd" ;
};
};
watchdog_pins: watchdog-pins {
mux {
function = "watchdog";
groups = "watchdog";
};
};
};
&ssusb {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
status = "okay";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <GIC_SPI 0x80 IRQ_TYPE_EDGE_FALLING>;
};