mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
9c24a14ffa
The Arcadyan VRV9510KWAC23 (trade name Livebox Next) is a Lantiq router distributed by some spanish ISPs Hardware: - SoC: Lantiq VRX200 - CPU: 2x MIPS 34Kc 500 MHz - RAM: 256 MiB DDR2 - Flash: 128 MiB NAND - Ethernet: Built-in Gigabit Ethernet switch, 5x 1GbE - Wifi 2.4GHz: Broadcom BCM43222KFBG 802.11b/g/b MIMO 2T2R - Wifi 5GHz: Broadcom BCM4360KMLG 802.11ac MIMO 3T3R - USB: 2x USB 2.0 - DSL: Built-in VDSL/ADSL2+ XWAY VRX208 - LEDs: 8x - Buttons: 4x - Phone: Lantiq PEF 42068 V XWAY SLIC120 Install instructions: Detailed instructions can be found on the wiki https://openwrt.org/toh/arcadyan/vrv9510kwac23 1. Boot into UART mode and upload the the https://raw.githubusercontent.com/danielhuici/arcadyan-vrv9510kwac23-utils/main/u-boot.asc file via serial console to boot into U-Boot. 2. Perform a backup of the NAND 3. Setup a TFTP server and serve the https://github.com/danielhuici/arcadyan-vrv9510kwac23-utils/raw/main/u-boot.ltq.lzo.nandspl. Replace the OEM bootloader with this one. Erase your NAND and write the image into it 4. Reboot the router 5. Serve the OpenWrt ramdisk image on your TFTP server and boot it via U-Boot 6. When OpenWrt boots, flash the SquashFS OpenWrt image using LuCi interface, so OpenWrt gets installed into the NAND Signed-off-by: Daniel Huici <danielhuici@hotmail.com>
396 lines
11 KiB
Makefile
396 lines
11 KiB
Makefile
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
|
|
define Device/dsa-migration
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
|
|
endef
|
|
|
|
define Device/alphanetworks_asl56026
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Alpha
|
|
DEVICE_MODEL := ASL56026
|
|
DEVICE_ALT0_VENDOR := BT Openreach
|
|
DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
|
|
IMAGE_SIZE := 7488k
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += alphanetworks_asl56026
|
|
|
|
define Device/arcadyan_arv7519rw22
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := ARV7519RW22
|
|
DEVICE_ALT0_VENDOR := Orange
|
|
DEVICE_ALT0_MODEL := Livebox
|
|
DEVICE_ALT0_VARIANT := 2.1
|
|
DEVICE_ALT1_VENDOR := Astoria Networks
|
|
DEVICE_ALT1_MODEL := ARV7519RW22
|
|
KERNEL_SIZE := 2048k
|
|
IMAGE_SIZE := 31232k
|
|
DEVICE_PACKAGES := kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += ARV7519RW22
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7519rw22
|
|
|
|
define Device/arcadyan_vg3503j
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := BT Openreach
|
|
DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
|
|
IMAGE_SIZE := 8000k
|
|
SUPPORTED_DEVICES += VG3503J
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vg3503j
|
|
|
|
define Device/arcadyan_vgv7510kw22-brn
|
|
$(Device/dsa-migration)
|
|
$(Device/lantiqBrnImage)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := VGV7510KW22
|
|
DEVICE_VARIANT := BRN
|
|
DEVICE_ALT0_VENDOR := o2
|
|
DEVICE_ALT0_MODEL := Box 6431
|
|
DEVICE_ALT0_VARIANT := BRN
|
|
IMAGE_SIZE := 7168k
|
|
SIGNATURE := BRNDA6431
|
|
MAGIC := 0x12345678
|
|
CRC32_POLY := 0x04c11db7
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7510KW22BRN
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7510kw22-brn
|
|
|
|
define Device/arcadyan_vgv7510kw22-nor
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := VGV7510KW22
|
|
DEVICE_VARIANT := NOR
|
|
DEVICE_ALT0_VENDOR := o2
|
|
DEVICE_ALT0_MODEL := Box 6431
|
|
DEVICE_ALT0_VARIANT := NOR
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7510KW22NOR
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7510kw22-nor
|
|
|
|
define Device/arcadyan_vgv7519-brn
|
|
$(Device/dsa-migration)
|
|
$(Device/lantiqBrnImage)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := VGV7519
|
|
DEVICE_VARIANT := BRN
|
|
DEVICE_ALT0_VENDOR := KPN
|
|
DEVICE_ALT0_MODEL := Experiabox 8
|
|
DEVICE_ALT0_VARIANT := BRN
|
|
IMAGE_SIZE := 7168k
|
|
SIGNATURE := 5D00008000
|
|
MAGIC := 0x12345678
|
|
CRC32_POLY := 0x2083b8ed
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7519BRN
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7519-brn
|
|
|
|
define Device/arcadyan_vgv7519-nor
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := VGV7519
|
|
DEVICE_VARIANT := NOR
|
|
DEVICE_ALT0_VENDOR := KPN
|
|
DEVICE_ALT0_MODEL := Experiabox 8
|
|
DEVICE_ALT0_VARIANT := NOR
|
|
IMAGE_SIZE := 15360k
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7519NOR
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7519-nor
|
|
|
|
define Device/arcadyan_vrv9510kwac23
|
|
$(Device/dsa-migration)
|
|
$(Device/NAND)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := VRV9510KWAC23
|
|
DEVICE_ALT0_VENDOR := Livebox
|
|
DEVICE_ALT0_MODEL := Next
|
|
BOARD_NAME := VRV9510KWAC23
|
|
DEVICE_PACKAGES := kmod-b43 wpad-basic-mbedtls broadcom-43222-sprom \
|
|
broadcom-4360-sprom kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
KERNEL_SIZE := 4096k
|
|
SUPPORTED_DEVICES += arcadyan_vrv9510kwac23
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vrv9510kwac23
|
|
|
|
define Device/avm_fritz3370
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 3370
|
|
DEVICE_VARIANT := Rev. 2
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += eva-kernel.bin eva-filesystem.bin
|
|
IMAGE/eva-kernel.bin := append-kernel
|
|
IMAGE/eva-filesystem.bin := append-ubi
|
|
DEVICE_PACKAGES := kmod-ath9k wpad-basic-mbedtls kmod-usb-dwc2 fritz-tffs
|
|
endef
|
|
|
|
define Device/avm_fritz3370-rev2-hynix
|
|
$(Device/dsa-migration)
|
|
$(Device/avm_fritz3370)
|
|
DEVICE_MODEL := FRITZ!Box 3370
|
|
DEVICE_VARIANT := Rev. 2 (Hynix NAND)
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3370-rev2-hynix
|
|
|
|
define Device/avm_fritz3370-rev2-micron
|
|
$(Device/dsa-migration)
|
|
$(Device/avm_fritz3370)
|
|
DEVICE_MODEL := FRITZ!Box 3370
|
|
DEVICE_VARIANT := Rev. 2 (Micron NAND)
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3370-rev2-micron
|
|
|
|
define Device/avm_fritz3390
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 3390
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls \
|
|
kmod-usb-dwc2 fritz-tffs
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3390
|
|
|
|
define Device/avm_fritz3490
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 3490
|
|
DEVICE_VARIANT := Other NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3490
|
|
|
|
define Device/avm_fritz3490-micron
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 3490
|
|
DEVICE_VARIANT := Micron NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3490-micron
|
|
|
|
define Device/avm_fritz5490
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 5490
|
|
DEVICE_ALT0_VENDOR := AVM
|
|
DEVICE_ALT0_MODEL := FRITZ!Box 5491
|
|
DEVICE_VARIANT := Other NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-usb3 fritz-tffs \
|
|
-ltq-vdsl-vr9-vectoring-fw-installer -kmod-ltq-vdsl-vr9-mei \
|
|
-kmod-ltq-vdsl-vr9 -kmod-ltq-atm-vr9 -kmod-ltq-ptm-vr9 \
|
|
-ltq-vdsl-vr9-app -kmod-owl-loader \
|
|
-dsl-vrx200-firmware-xdsl-a -dsl-vrx200-firmware-xdsl-b-patch
|
|
endef
|
|
TARGET_DEVICES += avm_fritz5490
|
|
|
|
define Device/avm_fritz5490-micron
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 5490
|
|
DEVICE_ALT0_VENDOR := AVM
|
|
DEVICE_ALT0_MODEL := FRITZ!Box 5491
|
|
DEVICE_VARIANT := Micron NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-usb3 fritz-tffs \
|
|
-ltq-vdsl-vr9-vectoring-fw-installer -kmod-ltq-vdsl-vr9-mei \
|
|
-kmod-ltq-vdsl-vr9 -kmod-ltq-atm-vr9 -kmod-ltq-ptm-vr9 \
|
|
-ltq-vdsl-vr9-app -kmod-owl-loader \
|
|
-dsl-vrx200-firmware-xdsl-a -dsl-vrx200-firmware-xdsl-b-patch
|
|
endef
|
|
TARGET_DEVICES += avm_fritz5490-micron
|
|
|
|
define Device/avm_fritz7360sl
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
DEVICE_MODEL := FRITZ!Box 7360 SL
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls \
|
|
kmod-usb-dwc2 fritz-tffs
|
|
SUPPORTED_DEVICES += FRITZ7360SL
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7360sl
|
|
|
|
define Device/avm_fritz7360-v2
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
DEVICE_MODEL := FRITZ!Box 7360
|
|
DEVICE_VARIANT := v2
|
|
IMAGE_SIZE := 32128k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls \
|
|
kmod-usb-dwc2 fritz-tffs
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7360-v2
|
|
|
|
define Device/avm_fritz7362sl
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 7362 SL
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls \
|
|
kmod-usb-dwc2 fritz-tffs
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7362sl
|
|
|
|
define Device/avm_fritz7412
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 7412
|
|
BOARD_NAME := FRITZ7412
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls \
|
|
fritz-tffs-nand fritz-caldata
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7412
|
|
|
|
define Device/avm_fritz7430
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 7430
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls \
|
|
kmod-usb-dwc2 fritz-tffs-nand fritz-caldata
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7430
|
|
|
|
define Device/avm_fritz7490
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 7490
|
|
DEVICE_VARIANT := Other NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7490
|
|
|
|
define Device/avm_fritz7490-micron
|
|
$(Device/dsa-migration)
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_MODEL := FRITZ!Box 7490
|
|
DEVICE_VARIANT := Micron NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 49152k
|
|
DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7490-micron
|
|
|
|
define Device/bt_homehub-v5a
|
|
$(Device/dsa-migration)
|
|
$(Device/NAND)
|
|
DEVICE_VENDOR := British Telecom (BT)
|
|
DEVICE_MODEL := Home Hub 5
|
|
DEVICE_VARIANT := Type A
|
|
BOARD_NAME := BTHOMEHUBV5A
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
|
|
kmod-ath10k-ct ath10k-firmware-qca988x-ct wpad-basic-mbedtls kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += BTHOMEHUBV5A
|
|
endef
|
|
TARGET_DEVICES += bt_homehub-v5a
|
|
|
|
define Device/buffalo_wbmr-300hpd
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WBMR-300HPD
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_PACKAGES := kmod-mt7603 wpad-basic-mbedtls kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += WBMR300
|
|
endef
|
|
TARGET_DEVICES += buffalo_wbmr-300hpd
|
|
|
|
define Device/lantiq_easy80920-nand
|
|
$(Device/dsa-migration)
|
|
$(Device/lantiqFullImage)
|
|
DEVICE_VENDOR := Lantiq
|
|
DEVICE_MODEL := VR9 EASY80920
|
|
DEVICE_VARIANT := NAND
|
|
IMAGE_SIZE := 64512k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy80920-nand
|
|
|
|
define Device/lantiq_easy80920-nor
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Lantiq
|
|
DEVICE_MODEL := VR9 EASY80920
|
|
DEVICE_VARIANT := NOR
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy80920-nor
|
|
|
|
define Device/netgear_dm200
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := DM200
|
|
IMAGES := sysupgrade.bin factory.img
|
|
IMAGE/sysupgrade.bin := append-kernel | \
|
|
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
|
|
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
|
|
append-rootfs | pad-rootfs | check-size | append-metadata
|
|
IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
|
|
IMAGE_SIZE := 7872k
|
|
NETGEAR_BOARD_ID := DM200
|
|
NETGEAR_HW_ID := 29765233+8+0+64+0+0
|
|
endef
|
|
TARGET_DEVICES += netgear_dm200
|
|
|
|
define Device/zyxel_p-2812hnu-f1
|
|
$(Device/dsa-migration)
|
|
$(Device/NAND)
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := P-2812HNU
|
|
DEVICE_VARIANT := F1
|
|
BOARD_NAME := P2812HNUF1
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
KERNEL_SIZE := 3072k
|
|
SUPPORTED_DEVICES += P2812HNUF1
|
|
endef
|
|
TARGET_DEVICES += zyxel_p-2812hnu-f1
|
|
|
|
define Device/zyxel_p-2812hnu-f3
|
|
$(Device/dsa-migration)
|
|
$(Device/NAND)
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := P-2812HNU
|
|
DEVICE_VARIANT := F3
|
|
BOARD_NAME := P2812HNUF3
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2
|
|
KERNEL_SIZE := 2048k
|
|
SUPPORTED_DEVICES += P2812HNUF3
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += zyxel_p-2812hnu-f3
|