mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
ef76b6ff3e
The DIR-890L is very similar to DIR-885L, but has both USB2 and USB3. The signature for the wrgac36 board was copied from DD-Wrt. The DIR-890L bootstrap will only load the first 2 MB after the SEAMA header in the NAND flash, uncompress it with LZMA and execute it. Since the compressed kernel will not fit in 2 MB we have a problem. Solve this by putting a LZMA compressed U-Boot into the first 128 KB of the flash followed by the kernel. The bootstrap will then uncompress and execute U-Boot and then we let U-Boot read the kernel from flash and execute it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
412 lines
11 KiB
Bash
412 lines
11 KiB
Bash
RAMFS_COPY_BIN='osafeloader oseama otrx truncate'
|
|
|
|
PART_NAME=firmware
|
|
|
|
BCM53XX_FW_FORMAT=
|
|
BCM53XX_FW_BOARD_ID=
|
|
BCM53XX_FW_INT_IMG_FORMAT=
|
|
BCM53XX_FW_INT_IMG_TRX_OFFSET=
|
|
BCM53XX_FW_INT_IMG_EXTRACT_CMD=
|
|
|
|
LXL_FLAGS_VENDOR_LUXUL=0x00000001
|
|
|
|
# $(1): file to read magic from
|
|
# $(2): offset in bytes
|
|
get_magic_long_at() {
|
|
dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%02x"'
|
|
}
|
|
|
|
# $(1): file to read LE long number from
|
|
# $(2): offset in bytes
|
|
get_le_long_at() {
|
|
echo $((0x$(dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/4 "%02x"')))
|
|
}
|
|
|
|
platform_flash_type() {
|
|
# On NAND devices "rootfs" is UBI volume, so won't be find in /proc/mtd
|
|
grep -q "\"rootfs\"" /proc/mtd && {
|
|
echo "serial"
|
|
return
|
|
}
|
|
|
|
echo "nand"
|
|
}
|
|
|
|
platform_expected_image() {
|
|
local machine=$(board_name)
|
|
|
|
case "$machine" in
|
|
"dlink,dir-885l") echo "seamaseal wrgac42_dlink.2015_dir885l"; return;;
|
|
"dlink,dir-890l") echo "seamaseal wrgac36_dlink.2013gui_dir890"; return;;
|
|
"luxul,abr-4500-v1") echo "lxl ABR-4500"; return;;
|
|
"luxul,xap-810-v1") echo "lxl XAP-810"; return;;
|
|
"luxul,xap-1410-v1") echo "lxl XAP-1410"; return;;
|
|
"luxul,xap-1440-v1") echo "lxl XAP-1440"; return;;
|
|
"luxul,xap-1510-v1") echo "lxl XAP-1510"; return;;
|
|
"luxul,xap-1610-v1") echo "lxl XAP-1610"; return;;
|
|
"luxul,xbr-4500-v1") echo "lxl XBR-4500"; return;;
|
|
"luxul,xwc-1000") echo "lxl XWC-1000"; return;;
|
|
"luxul,xwc-2000-v1") echo "lxl XWC-2000"; return;;
|
|
"luxul,xwr-1200-v1") echo "lxl XWR-1200"; return;;
|
|
"luxul,xwr-3100-v1") echo "lxl XWR-3100"; return;;
|
|
"luxul,xwr-3150-v1") echo "lxl XWR-3150"; return;;
|
|
"netgear,r6250-v1") echo "chk U12H245T00_NETGEAR"; return;;
|
|
"netgear,r6300-v2") echo "chk U12H240T00_NETGEAR"; return;;
|
|
"netgear,r7000") echo "chk U12H270T00_NETGEAR"; return;;
|
|
"netgear,r7900") echo "chk U12H315T30_NETGEAR"; return;;
|
|
"netgear,r8000") echo "chk U12H315T00_NETGEAR"; return;;
|
|
"netgear,r8500") echo "chk U12H334T00_NETGEAR"; return;;
|
|
"tplink,archer-c9-v1") echo "safeloader"; return;;
|
|
esac
|
|
}
|
|
|
|
platform_identify() {
|
|
local magic
|
|
|
|
magic=$(get_magic_long "$1")
|
|
case "$magic" in
|
|
"48445230")
|
|
BCM53XX_FW_FORMAT="trx"
|
|
return
|
|
;;
|
|
"2a23245e")
|
|
local header_len=$((0x$(get_magic_long_at "$1" 4)))
|
|
local board_id_len=$(($header_len - 40))
|
|
|
|
BCM53XX_FW_FORMAT="chk"
|
|
BCM53XX_FW_BOARD_ID=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
BCM53XX_FW_INT_IMG_FORMAT="trx"
|
|
BCM53XX_FW_INT_IMG_TRX_OFFSET="$header_len"
|
|
BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=$header_len iflag=skip_bytes"
|
|
return
|
|
;;
|
|
"4c584c23")
|
|
local hdr_len=$(get_le_long_at "$1" 8)
|
|
local flags=$(get_le_long_at "$1" 12)
|
|
|
|
[ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup
|
|
|
|
BCM53XX_FW_FORMAT="lxl"
|
|
BCM53XX_FW_BOARD_ID=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
BCM53XX_FW_INT_IMG_FORMAT="trx"
|
|
BCM53XX_FW_INT_IMG_TRX_OFFSET="$hdr_len"
|
|
BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=$hdr_len iflag=skip_bytes"
|
|
|
|
return
|
|
;;
|
|
"5ea3a417")
|
|
BCM53XX_FW_FORMAT="seamaseal"
|
|
BCM53XX_FW_BOARD_ID=$(oseama info "$1" | grep "Meta entry:.*signature=" | sed "s/.*=//")
|
|
BCM53XX_FW_INT_IMG_EXTRACT_CMD="oseama extract - -e 0"
|
|
return
|
|
;;
|
|
esac
|
|
|
|
magic=$(get_magic_long_at "$1" 14)
|
|
[ "$magic" = "55324e44" ] && {
|
|
BCM53XX_FW_FORMAT="cybertan"
|
|
BCM53XX_FW_BOARD_ID=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
BCM53XX_FW_INT_IMG_FORMAT="trx"
|
|
BCM53XX_FW_INT_IMG_TRX_OFFSET="32"
|
|
BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=32 iflag=skip_bytes"
|
|
return
|
|
}
|
|
|
|
magic=$(get_magic_long_at "$1" 60)
|
|
[ "$magic" = "4c584c23" ] && {
|
|
notify_firmware_no_backup
|
|
|
|
BCM53XX_FW_FORMAT="lxlold"
|
|
BCM53XX_FW_BOARD_ID=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
BCM53XX_FW_INT_IMG_FORMAT="trx"
|
|
BCM53XX_FW_INT_IMG_TRX_OFFSET="64"
|
|
BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=64 iflag=skip_bytes"
|
|
return
|
|
}
|
|
|
|
if osafeloader info "$1" > /dev/null 2>&1; then
|
|
BCM53XX_FW_FORMAT="safeloader"
|
|
return
|
|
fi
|
|
}
|
|
|
|
platform_other_check_image() {
|
|
[ "$#" -gt 1 ] && return 1
|
|
|
|
local error=0
|
|
|
|
platform_identify "$1"
|
|
[ -z "$BCM53XX_FW_FORMAT" ] && {
|
|
echo "Invalid image type. Please use firmware specific for this device."
|
|
notify_firmware_broken
|
|
return 1
|
|
}
|
|
echo "Found $BCM53XX_FW_FORMAT firmware for device $BCM53XX_FW_BOARD_ID"
|
|
|
|
local expected_image="$(platform_expected_image)"
|
|
local tmp_format=$BCM53XX_FW_FORMAT
|
|
[ "$tmp_format" = "lxlold" ] && tmp_format="lxl"
|
|
[ -n "$expected_image" -a -n "$BCM53XX_FW_BOARD_ID" -a "$expected_image" != "$tmp_format $BCM53XX_FW_BOARD_ID" ] && {
|
|
echo "Firmware doesn't match device ($expected_image)"
|
|
error=1
|
|
}
|
|
|
|
case "$BCM53XX_FW_FORMAT" in
|
|
"seamaseal")
|
|
$(oseama info "$1" -e 0 | grep -q "Meta entry:.*type=firmware") || {
|
|
echo "Seama seal doesn't contain firmware entity"
|
|
error=1
|
|
}
|
|
;;
|
|
"trx")
|
|
if ! otrx check "$1"; then
|
|
echo "Failed to find a valid TRX in firmware"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
|
|
[ "$expected_image" == "safeloader" ] && {
|
|
echo "This device expects SafeLoader format and may not work with TRX"
|
|
error=1
|
|
}
|
|
;;
|
|
*)
|
|
case "$BCM53XX_FW_INT_IMG_FORMAT" in
|
|
"trx")
|
|
# Make sure that both ways of extracting TRX work.
|
|
# platform_do_upgrade() may use any of them.
|
|
if ! otrx check "$1" -o "$BCM53XX_FW_INT_IMG_TRX_OFFSET" || \
|
|
! $BCM53XX_FW_INT_IMG_EXTRACT_CMD < $1 | otrx check -; then
|
|
echo "Invalid (corrupted?) TRX firmware"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
;;
|
|
esac
|
|
;;
|
|
esac
|
|
|
|
return $error
|
|
}
|
|
|
|
platform_check_image() {
|
|
local board
|
|
|
|
board="$(board_name)"
|
|
case "$board" in
|
|
# Ideally, REQUIRE_IMAGE_METADATA=1 would suffice
|
|
# but this would require converting all other
|
|
# devices too.
|
|
meraki,mr26 | \
|
|
meraki,mr32)
|
|
nand_do_platform_check "${board//,/_}" "$1"
|
|
return $?
|
|
;;
|
|
*)
|
|
platform_other_check_image "$1"
|
|
return $?
|
|
;;
|
|
esac
|
|
|
|
return 1
|
|
}
|
|
|
|
|
|
# $(1): TRX image or firmware containing TRX
|
|
# $(2): offset of TRX in firmware (optional)
|
|
platform_do_upgrade_nand_trx() {
|
|
local dir="/tmp/sysupgrade-bcm53xx"
|
|
local trx="$1"
|
|
local offset="$2"
|
|
|
|
# Extract partitions from trx
|
|
rm -fR $dir
|
|
mkdir -p $dir
|
|
otrx extract "$trx" \
|
|
${offset:+-o $offset} \
|
|
-1 $dir/kernel \
|
|
-2 $dir/root
|
|
[ $? -ne 0 ] && {
|
|
echo "Failed to extract TRX partitions."
|
|
return
|
|
}
|
|
|
|
# Firmwares without UBI image should be flashed "normally"
|
|
local root_type=$(identify $dir/root)
|
|
[ "$root_type" != "ubi" ] && {
|
|
echo "Provided firmware doesn't use UBI for rootfs."
|
|
return
|
|
}
|
|
|
|
# Prepare TRX file with just a kernel that will replace current one
|
|
local linux_length=$(grep "\"linux\"" /proc/mtd | sed "s/mtd[0-9]*:[ \t]*\([^ \t]*\).*/\1/")
|
|
[ -z "$linux_length" ] && {
|
|
echo "Unable to find \"linux\" partition size"
|
|
exit 1
|
|
}
|
|
linux_length=$((0x$linux_length))
|
|
local kernel_length=$(wc -c $dir/kernel | cut -d ' ' -f 1)
|
|
[ $kernel_length -gt $linux_length ] && {
|
|
echo "New kernel doesn't fit \"linux\" partition."
|
|
return
|
|
}
|
|
rm -f /tmp/null.bin
|
|
rm -f /tmp/kernel.trx
|
|
touch /tmp/null.bin
|
|
otrx create /tmp/kernel.trx \
|
|
-f $dir/kernel -b $(($linux_length + 28)) \
|
|
-f /tmp/null.bin
|
|
[ $? -ne 0 ] && {
|
|
echo "Failed to create simple TRX with new kernel."
|
|
return
|
|
}
|
|
|
|
# Prepare UBI image (drop unwanted extra blocks)
|
|
local ubi_length=0
|
|
while [ "$(dd if=$dir/root skip=$ubi_length bs=1 count=4 2>/dev/null)" = "UBI#" ]; do
|
|
ubi_length=$(($ubi_length + 131072))
|
|
done
|
|
truncate -s $ubi_length $dir/root
|
|
[ $? -ne 0 ] && {
|
|
echo "Failed to prepare new UBI image."
|
|
return
|
|
}
|
|
|
|
# Flash
|
|
mtd write /tmp/kernel.trx firmware || exit 1
|
|
nand_do_upgrade $dir/root
|
|
}
|
|
|
|
platform_do_upgrade_nand_seamaseal() {
|
|
local dir="/tmp/sysupgrade-bcm53xx"
|
|
local seamaseal="$1"
|
|
local tmp
|
|
|
|
# Extract Seama entity from Seama seal
|
|
rm -fR $dir
|
|
mkdir -p $dir
|
|
oseama extract "$seamaseal" \
|
|
-e 0 \
|
|
-o $dir/seama.entity
|
|
[ $? -ne 0 ] && {
|
|
echo "Failed to extract Seama entity."
|
|
return
|
|
}
|
|
local entity_size=$(wc -c $dir/seama.entity | cut -d ' ' -f 1)
|
|
|
|
local ubi_offset=0
|
|
tmp=0
|
|
while [ 1 ]; do
|
|
[ $tmp -ge $entity_size ] && break
|
|
[ "$(dd if=$dir/seama.entity skip=$tmp bs=1 count=4 2>/dev/null)" = "UBI#" ] && {
|
|
ubi_offset=$tmp
|
|
break
|
|
}
|
|
tmp=$(($tmp + 131072))
|
|
done
|
|
[ $ubi_offset -eq 0 ] && {
|
|
echo "Failed to find UBI in Seama entity."
|
|
return
|
|
}
|
|
|
|
local ubi_length=0
|
|
while [ "$(dd if=$dir/seama.entity skip=$(($ubi_offset + $ubi_length)) bs=1 count=4 2>/dev/null)" = "UBI#" ]; do
|
|
ubi_length=$(($ubi_length + 131072))
|
|
done
|
|
|
|
dd if=$dir/seama.entity of=$dir/kernel.seama bs=131072 count=$(($ubi_offset / 131072)) 2>/dev/null
|
|
dd if=$dir/seama.entity of=$dir/root.ubi bs=131072 skip=$(($ubi_offset / 131072)) count=$(($ubi_length / 131072)) 2>/dev/null
|
|
|
|
# Flash
|
|
local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"\(kernel\|linux\)".*/\1/p' /proc/mtd)
|
|
mtd write $dir/kernel.seama firmware || exit 1
|
|
mtd ${kernel_size:+-c 0x$kernel_size} fixseama firmware
|
|
nand_do_upgrade $dir/root.ubi
|
|
}
|
|
|
|
platform_img_from_safeloader() {
|
|
local dir="/tmp/sysupgrade-bcm53xx"
|
|
|
|
# Extract partitions from SafeLoader
|
|
rm -fR $dir
|
|
mkdir -p $dir
|
|
osafeloader extract "$1" \
|
|
-p "os-image" \
|
|
-o $dir/os-image
|
|
osafeloader extract "$1" \
|
|
-p "file-system" \
|
|
-o $dir/file-system
|
|
|
|
mtd write $dir/file-system rootfs
|
|
|
|
echo -n $dir/os-image
|
|
}
|
|
|
|
platform_other_do_upgrade() {
|
|
platform_identify "$1"
|
|
|
|
[ "$(platform_flash_type)" == "nand" ] && {
|
|
# Try NAND-aware upgrade
|
|
case "$BCM53XX_FW_FORMAT" in
|
|
"seamaseal")
|
|
platform_do_upgrade_nand_seamaseal "$1"
|
|
;;
|
|
"trx")
|
|
platform_do_upgrade_nand_trx "$1"
|
|
;;
|
|
*)
|
|
case "$BCM53XX_FW_INT_IMG_FORMAT" in
|
|
"trx")
|
|
platform_do_upgrade_nand_trx "$1" "$BCM53XX_FW_INT_IMG_TRX_OFFSET"
|
|
;;
|
|
*)
|
|
echo "NAND aware sysupgrade is unsupported for $BCM53XX_FW_FORMAT format"
|
|
;;
|
|
esac
|
|
;;
|
|
esac
|
|
|
|
# Above calls exit on success.
|
|
# If we got here something went wrong.
|
|
echo "Writing whole image to NAND flash. All erase counters will be lost."
|
|
}
|
|
|
|
case "$BCM53XX_FW_FORMAT" in
|
|
"safeloader")
|
|
PART_NAME=os-image
|
|
img=$(platform_img_from_safeloader "$1")
|
|
default_do_upgrade "$img"
|
|
;;
|
|
"seamaseal")
|
|
default_do_upgrade "$1" "$BCM53XX_FW_INT_IMG_EXTRACT_CMD"
|
|
;;
|
|
"trx")
|
|
default_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
case "$BCM53XX_FW_INT_IMG_FORMAT" in
|
|
"trx")
|
|
default_do_upgrade "$1" "$BCM53XX_FW_INT_IMG_EXTRACT_CMD"
|
|
;;
|
|
esac
|
|
;;
|
|
esac
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
case "$(board_name)" in
|
|
meraki,mr26 | \
|
|
meraki,mr32)
|
|
CI_KERNPART="part.safe"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
platform_other_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|