INAGAKI Hiroshi b3ca1f30ef ramips: add support for ELECOM WRC-1750GST2 ... ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G) - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX, from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-1750GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex)) WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex)) 2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex)) 5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2021-03-21 22:45:20 +01:00
..
lzma-loader	ramips: lzma-loader: make FLASH_START configurable	2020-09-03 14:15:30 +02:00
common-tp-link.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-03-21 20:02:55 +01:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
mt76x8.mk	treewide: make AddDepends/usb-serial selective	2021-03-06 12:38:38 +01:00
mt7620.mk	treewide: make AddDepends/usb-serial selective	2021-03-06 12:38:38 +01:00
mt7621.mk	ramips: add support for ELECOM WRC-1750GST2	2021-03-21 22:45:20 +01:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	rampis: use lzma-loader for ZTE MF283+	2021-03-19 01:25:26 +01:00
rt3883.mk	ramips: add support for Senao Engenius ESR600H	2020-12-22 19:11:50 +01:00