ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
ec0ff928d9
openwrt/target/linux/mvebu/image/cortexa9.mk
INAGAKI Hiroshi 102dc5a625 mvebu: add support for Fortinet FortiGate 50E 
Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820).

Specification:

- SoC          : Marvell Armada 385 88F6820
- RAM          : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ")
- Flash        : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G)
- Ethernet     : 7x 10/100/1000 Mbps
  - LAN 1-5    : Marvell 88E6176
  - WAN 1, 2   : Marvell 88E1512 (2x)
- LEDs/Keys    : 18x/1x
- UART         : "CONSOLE" port (RJ-45, RS-232C level)
  - port       : ttyS0
  - settings   : 9600bps 8n1
  - assignment : 1:NC , 2:NC , 3:TXD, 4:GND,
                 5:GND, 6:RXD, 7:NC , 8:NC
  - note       : compatible with Cisco console cable
- HW Monitoring: nuvoTon NCT7802Y
- Power        : 12 VDC, 2 A
  - plug       : Molex 5557-02R

Flash instruction using initramfs image:

1. Power on FG-50E and interrupt to show bootmenu
2. Call "[R]: Review TFTP parameters.", check TFTP parameters and
   connect computer to "Image download port" in the parameters
3. Prepare TFTP server with the parameters obtained above
4. Rename OpenWrt initramfs image to "image.out" and put to TFTP
   directory
5. Call "[T]: Initiate TFTP firmware transfer." to download initramfs
   image from TFTP server
6. Type "r" key when the following message is showed, to boot initramfs
   image without flashing to spi-nor flash

   "Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?"

7. On initramfs image, backup mtd if needed

   minimum:

   - "firmware-info"
   - "kernel"
   - "rootfs"

7. On initramfs image, upload sysupgrade image to the device and perform
   sysupgrade
8. Wait ~200 seconds to complete flashing and rebooting.
   If the device is booted with stock firmware, login to bootmenu and
   call "[B]: Boot with backup firmware and set as default." to set the
   first OS image as default and boot it.

Notes:

- All "SPEED" LEDs(Green/Amber) of LAN and 1000M "SPEED" LEDs(Green) of
  WAN1/2 are connected to GPIO expander. There is no way to indicate
  link speed of networking device on Linux Kernel/OpenWrt, so those LEDs
  cannot be handled like stock firmware.
  On OpenWrt, use netdev(link) trigger instead.

- Both colors of Bi-color LEDs on the front panel cannot be turned on at
  the same time.

- "PWR" and "Logo" LEDs are connected to power source directly.

- The following partitions are added for OpenWrt.
  These partitions are contained in "uboot" partition (0x0-0x1fffff) on
  stock firmware.

  - "firmware-info"
  - "dtb"
  - "u-boot-env"
  - "board-info"

Image header for bootmenu tftp:

  0x0 - 0xf  : ?
 0x10 - 0x2f : Image Name
 0x30 - 0x17f: ?
0x180 - 0x183: Kernel Offset*
0x184 - 0x187: Kernel Length*
0x188 - 0x18b: RootFS Offset (ext2)*
0x18c - 0x18f: RootFS Length (ext2)*
0x190 - 0x193: DTB Offset
0x194 - 0x197: DTB Length
0x198 - 0x19b: Data Offset (jffs2)
0x19c - 0x19f: Data Length (jffs2)
0x1a0 - 0x1ff: ?

*: required for initramfs image

MAC addresses:

(eth0): 70:4C:A5:xx:xx:7C (board-info, 0xd880 (hex))
WAN 1 : 70:4C:A5:xx:xx:7D
WAN 2 : 70:4C:A5:xx:xx:7E
LAN 1 : 70:4C:A5:xx:xx:7F
LAN 2 : 70:4C:A5:xx:xx:80
LAN 3 : 70:4C:A5:xx:xx:81
LAN 4 : 70:4C:A5:xx:xx:82
LAN 5 : 70:4C:A5:xx:xx:83

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2023-03-08 23:49:39 +01:00

347 lines
11 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-project.org
define Build/fortigate-header
( \
dd if=/dev/zero bs=384 count=1 2>/dev/null; \
datalen=$$(wc -c $@ | cut -d' ' -f1); \
datalen=$$(printf "%08x" $$datalen); \
datalen="$${datalen:6:2}$${datalen:4:2}$${datalen:2:2}$${datalen:0:2}"; \
printf $$(echo "00020000$${datalen}ffff0000ffff0000" | sed 's/../\\x&/g'); \
dd if=/dev/zero bs=112 count=1 2>/dev/null; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
define Device/kernel-size-migration
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (up to 19.07) due to kernel size restrictions. \
Upgrade via sysupgrade mechanism is not possible, so new installation via factory style image is required.
endef
define Device/buffalo_ls220de
$(Device/NAND-128K)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := LinkStation LS220DE
KERNEL_UBIFS_OPTS = -m $$(PAGESIZE) -e 124KiB -c 172 -x none
KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-ubifs
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
DEVICE_DTS := armada-370-buffalo-ls220de
DEVICE_PACKAGES := \
kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-linkstation-poweroff \
kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-fs-xfs \
mdadm mkf2fs e2fsprogs partx-utils
endef
TARGET_DEVICES += buffalo_ls220de
define Device/buffalo_ls421de
$(Device/NAND-128K)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := LinkStation LS421DE
SUBPAGESIZE :=
KERNEL_SIZE := 33554432
FILESYSTEMS := squashfs ubifs
KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-jffs2
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
DEVICE_DTS := armada-370-buffalo-ls421de
DEVICE_PACKAGES := \
kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-usb3 \
kmod-linkstation-poweroff kmod-md-raid0 kmod-md-raid1 kmod-md-mod \
kmod-fs-xfs mkf2fs e2fsprogs partx-utils
endef
TARGET_DEVICES += buffalo_ls421de
define Device/ctera_c200-v2
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
DEVICE_VENDOR := Ctera
DEVICE_MODEL := C200
DEVICE_VARIANT := V2
SOC := armada-370
KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
KERNEL_IN_UBI :=
KERNEL_SUFFIX := -factory.firm
DEVICE_PACKAGES := \
kmod-gpio-button-hotplug kmod-hwmon-drivetemp kmod-hwmon-nct7802 \
kmod-rtc-s35390a kmod-usb3 kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += ctera_c200-v2
define Device/cznic_turris-omnia
DEVICE_VENDOR := CZ.NIC
DEVICE_MODEL := Turris Omnia
KERNEL_INSTALL := 1
SOC := armada-385
KERNEL := kernel-bin
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
DEVICE_PACKAGES := \
mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
wpad-basic-mbedtls kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \
partx-utils kmod-i2c-mux-pca954x kmod-leds-turris-omnia
IMAGES := $$(DEVICE_IMG_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(DEVICE_IMG_PREFIX)-initramfs.tar.gz
IMAGE/$$(DEVICE_IMG_PREFIX)-sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
IMAGE/omnia-medkit-$$(DEVICE_IMG_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip
DEVICE_IMG_NAME = $$(2)
SUPPORTED_DEVICES += armada-385-turris-omnia
BOOT_SCRIPT := turris-omnia
endef
TARGET_DEVICES += cznic_turris-omnia
define Device/fortinet_fg-50e
DEVICE_VENDOR := Fortinet
DEVICE_MODEL := FortiGate 50E
SOC := armada-385
KERNEL := kernel-bin | append-dtb
KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
gzip-filename FGT50E
KERNEL_SIZE := 6144k
DEVICE_DTS := armada-385-fortinet-fg-50e
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := kmod-hwmon-nct7802
endef
TARGET_DEVICES += fortinet_fg-50e
define Device/globalscale_mirabox
$(Device/NAND-512K)
DEVICE_VENDOR := Globalscale
DEVICE_MODEL := Mirabox
SOC := armada-370
SUPPORTED_DEVICES += mirabox
endef
TARGET_DEVICES += globalscale_mirabox
define Device/iptime_nas1dual
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := NAS1dual
DEVICE_PACKAGES := kmod-hwmon-drivetemp kmod-hwmon-gpiofan kmod-usb3
SOC := armada-385
KERNEL := kernel-bin | append-dtb | iptime-naspkg nas1dual
KERNEL_SIZE := 6144k
IMAGES := sysupgrade.bin
IMAGE_SIZE := 64256k
IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += iptime_nas1dual
define Device/kobol_helios4
DEVICE_VENDOR := Kobol
DEVICE_MODEL := Helios4
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
SOC := armada-388
UBOOT := helios4-u-boot-with-spl.kwb
BOOT_SCRIPT := clearfog
endef
TARGET_DEVICES += kobol_helios4
define Device/linksys
$(Device/NAND-128K)
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-mbedtls
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | pad-to $$$$(PAGESIZE)
KERNEL_SIZE := 6144k
endef
define Device/linksys_wrt1200ac
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT1200AC
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Caiman
DEVICE_DTS := armada-385-linksys-caiman
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
SUPPORTED_DEVICES += armada-385-linksys-caiman linksys,caiman
endef
TARGET_DEVICES += linksys_wrt1200ac
define Device/linksys_wrt1900acs
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT1900ACS
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := WRT1900ACS
DEVICE_ALT0_VARIANT := v2
DEVICE_ALT1_VENDOR := Linksys
DEVICE_ALT1_MODEL := Shelby
DEVICE_DTS := armada-385-linksys-shelby
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
SUPPORTED_DEVICES += armada-385-linksys-shelby linksys,shelby
endef
TARGET_DEVICES += linksys_wrt1900acs
define Device/linksys_wrt1900ac-v1
$(call Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := WRT1900AC
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Mamba
DEVICE_DTS := armada-xp-linksys-mamba
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
KERNEL_SIZE := 4096k
SUPPORTED_DEVICES += armada-xp-linksys-mamba linksys,mamba
endef
TARGET_DEVICES += linksys_wrt1900ac-v1
define Device/linksys_wrt1900ac-v2
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT1900AC
DEVICE_VARIANT := v2
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Cobra
DEVICE_DTS := armada-385-linksys-cobra
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
SUPPORTED_DEVICES += armada-385-linksys-cobra linksys,cobra
endef
TARGET_DEVICES += linksys_wrt1900ac-v2
define Device/linksys_wrt3200acm
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT3200ACM
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Rango
DEVICE_DTS := armada-385-linksys-rango
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
SUPPORTED_DEVICES += armada-385-linksys-rango linksys,rango
endef
TARGET_DEVICES += linksys_wrt3200acm
define Device/linksys_wrt32x
$(call Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := WRT32X
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Venom
DEVICE_DTS := armada-385-linksys-venom
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
KERNEL_SIZE := 6144k
KERNEL := kernel-bin | append-dtb
SUPPORTED_DEVICES += armada-385-linksys-venom linksys,venom
endef
TARGET_DEVICES += linksys_wrt32x
define Device/marvell_a370-db
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 370 Development Board (DB-88F6710-BP-DDR3)
DEVICE_DTS := armada-370-db
SUPPORTED_DEVICES += armada-370-db
endef
TARGET_DEVICES += marvell_a370-db
define Device/marvell_a370-rd
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 370 RD (RD-88F6710-A1)
DEVICE_DTS := armada-370-rd
SUPPORTED_DEVICES += armada-370-rd
endef
TARGET_DEVICES += marvell_a370-rd
define Device/marvell_a385-db-ap
$(Device/NAND-256K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 385 Development Board AP (DB-88F6820-AP)
DEVICE_DTS := armada-385-db-ap
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | pad-to $$$$(PAGESIZE)
KERNEL_SIZE := 8192k
SUPPORTED_DEVICES += armada-385-db-ap
endef
TARGET_DEVICES += marvell_a385-db-ap
define Device/marvell_a388-rd
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 388 RD (RD-88F6820-AP)
DEVICE_DTS := armada-388-rd
IMAGES := firmware.bin
IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd
endef
TARGET_DEVICES += marvell_a388-rd
define Device/marvell_axp-db
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada XP Development Board (DB-78460-BP)
DEVICE_DTS := armada-xp-db
SUPPORTED_DEVICES += armada-xp-db
endef
TARGET_DEVICES += marvell_axp-db
define Device/marvell_axp-gp
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada Armada XP GP (DB-MV784MP-GP)
DEVICE_DTS := armada-xp-gp
SUPPORTED_DEVICES += armada-xp-gp
endef
TARGET_DEVICES += marvell_axp-gp
define Device/plathome_openblocks-ax3-4
DEVICE_VENDOR := Plat'Home
DEVICE_MODEL := OpenBlocks AX3
DEVICE_VARIANT := 4 ports
SOC := armada-xp
SUPPORTED_DEVICES += openblocks-ax3-4
BLOCKSIZE := 128k
PAGESIZE := 1
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi
endef
TARGET_DEVICES += plathome_openblocks-ax3-4
define Device/solidrun_clearfog-base-a1
DEVICE_VENDOR := SolidRun
DEVICE_MODEL := ClearFog Base
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro
UBOOT := clearfog-u-boot-with-spl.kwb
BOOT_SCRIPT := clearfog
SUPPORTED_DEVICES += armada-388-clearfog-base
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Ethernet interface rename has been dropped
endef
TARGET_DEVICES += solidrun_clearfog-base-a1
define Device/solidrun_clearfog-pro-a1
$(Device/dsa-migration)
DEVICE_VENDOR := SolidRun
DEVICE_MODEL := ClearFog Pro
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
UBOOT := clearfog-u-boot-with-spl.kwb
BOOT_SCRIPT := clearfog
SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro
endef
TARGET_DEVICES += solidrun_clearfog-pro-a1
Reference in New Issue View Git Blame Copy Permalink