mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
76 lines
2.5 KiB
Diff
76 lines
2.5 KiB
Diff
From ea59741f2679e30d765b6a9e0d45265e3033a38c Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
Date: Tue, 18 Sep 2018 10:47:38 +0100
|
|
Subject: [PATCH 418/454] dtoverlays: Correct DT handling camera GPIOs
|
|
|
|
The firmware has support for updating overrides with the correct
|
|
GPIO settings for the camera GPIOs, but the wrong device tree
|
|
setup ended up being merged.
|
|
Correct the DT configuration so that the firmware does set it
|
|
up correctly.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++
|
|
arch/arm/boot/dts/overlays/README | 10 +---------
|
|
arch/arm/boot/dts/overlays/ov5647-overlay.dts | 12 ++++++++++--
|
|
3 files changed, 18 insertions(+), 11 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm270x.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm270x.dtsi
|
|
@@ -152,6 +152,13 @@
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
+
|
|
+ __overrides__ {
|
|
+ cam0-pwdn-ctrl;
|
|
+ cam0-pwdn;
|
|
+ cam0-led-ctrl;
|
|
+ cam0-led;
|
|
+ };
|
|
};
|
|
|
|
/* Configure and use the auxilliary interrupt controller */
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1283,15 +1283,7 @@ Info: Omnivision OV5647 camera module.
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
|
variants.
|
|
Load: dtoverlay=ov5647,<param>=<val>
|
|
-Params: cam0-pwdn GPIO used to control the sensor powerdown line.
|
|
-
|
|
- cam0-led GPIO used to control the sensor led
|
|
- Both these fields should be automatically filled
|
|
- in by the firmware to reflect the default GPIO
|
|
- configuration of the particular Pi variant in
|
|
- use.
|
|
-
|
|
- i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
|
+Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
|
This is required for Pi B+, 2, 0, and 0W.
|
|
|
|
|
|
--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts
|
|
@@ -78,9 +78,17 @@
|
|
};
|
|
};
|
|
|
|
+ fragment@5 {
|
|
+ target-path="/__overrides__";
|
|
+ __overlay__ {
|
|
+ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0";
|
|
+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
|
|
+ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12";
|
|
+ cam0-led = <&ov5647>,"pwdn-gpios:16";
|
|
+ };
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
i2c_pins_28_29 = <0>,"+4-5";
|
|
- cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
|
|
- cam0-led = <&ov5647>,"pwdn-gpios:16";
|
|
};
|
|
};
|