openwrt/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c
John Crispin 22c5f96c6b ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
Some u-boot versions for QCA955x change the delays based on the link speed
during boot. This usually breaks the support of other linkspeeds when
OpenWrt is booted. It also conflicts with the
at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own
values in QCA955X_GMAC_REG_ETH_CFG.

The default RGMII values from the Atheros u-boot are currently used to
preset the existing mach files. These may have to be adjusted for boards
using different values but which are not currently set them explicitely in
OpenWrt.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Christian Beier <cb@shoutrlabs.com>
Cc: Chris R Blake <chrisrblake93@gmail.com>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Matthias Schiffer <mschiffer@universe-factory.net>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Christian Mehlis <christian@m3hlis.de>
Cc: Luka Perkov <luka@openwrt.org>
Cc: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 49029
2016-03-16 09:27:08 +00:00

177 lines
4.2 KiB
C

/*
* EnGenius ESR1750 board support
*
* Copyright (c) 2014 Jon Suphammer <jon@suphammer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "nvram.h"
#define ESR1750_GPIO_LED_WLAN_5G 23
#define ESR1750_GPIO_LED_WLAN_2G 13
#define ESR1750_GPIO_LED_POWER_AMBER 2
#define ESR1750_GPIO_LED_WPS_AMBER 22
#define ESR1750_GPIO_LED_WPS_BLUE 19
#define ESR1750_GPIO_BTN_WPS 16
#define ESR1750_GPIO_BTN_RESET 17
#define ESR1750_KEYS_POLL_INTERVAL 20 /* msecs */
#define ESR1750_KEYS_DEBOUNCE_INTERVAL (3 * ESR1750_KEYS_POLL_INTERVAL)
#define ESR1750_CALDATA_ADDR 0x1fff0000
#define ESR1750_WMAC_CALDATA_OFFSET 0x1000
#define ESR1750_PCIE_CALDATA_OFFSET 0x5000
#define ESR1750_NVRAM_ADDR 0x1f030000
#define ESR1750_NVRAM_SIZE 0x10000
static struct gpio_led esr1750_leds_gpio[] __initdata = {
{
.name = "esr1750:amber:power",
.gpio = ESR1750_GPIO_LED_POWER_AMBER,
.active_low = 1,
},
{
.name = "esr1750:blue:wps",
.gpio = ESR1750_GPIO_LED_WPS_BLUE,
.active_low = 1,
},
{
.name = "esr1750:amber:wps",
.gpio = ESR1750_GPIO_LED_WPS_AMBER,
.active_low = 1,
},
{
.name = "esr1750:blue:wlan-2g",
.gpio = ESR1750_GPIO_LED_WLAN_2G,
.active_low = 1,
},
{
.name = "esr1750:blue:wlan-5g",
.gpio = ESR1750_GPIO_LED_WLAN_5G,
.active_low = 1,
}
};
static struct gpio_keys_button esr1750_gpio_keys[] __initdata = {
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
.gpio = ESR1750_GPIO_BTN_WPS,
.active_low = 1,
},
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
.gpio = ESR1750_GPIO_BTN_RESET,
.active_low = 1,
},
};
static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_platform_data esr1750_ar8327_data = {
.pad0_cfg = &esr1750_ar8327_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info esr1750_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &esr1750_ar8327_data,
},
};
static int esr1750_get_mac(const char *name, char *mac)
{
u8 *nvram = (u8 *) KSEG1ADDR(ESR1750_NVRAM_ADDR);
int err;
err = ath79_nvram_parse_mac_addr(nvram, ESR1750_NVRAM_SIZE,
name, mac);
if (err) {
pr_err("no MAC address found for %s\n", name);
return false;
}
return true;
}
static void __init esr1750_setup(void)
{
u8 *caldata = (u8 *) KSEG1ADDR(ESR1750_CALDATA_ADDR);
u8 mac1[ETH_ALEN];
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(esr1750_leds_gpio),
esr1750_leds_gpio);
ath79_register_gpio_keys_polled(-1, ESR1750_KEYS_POLL_INTERVAL,
ARRAY_SIZE(esr1750_gpio_keys),
esr1750_gpio_keys);
ath79_register_usb();
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
ath79_register_mdio(0, 0x0);
mdiobus_register_board_info(esr1750_mdio0_info,
ARRAY_SIZE(esr1750_mdio0_info));
/* GMAC0 is connected to an QCA8327N switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
if (esr1750_get_mac("ethaddr=", mac1))
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
ath79_eth0_pll_data.pll_1000 = 0xa6000000;
ath79_register_eth(0);
ath79_register_wmac(caldata + ESR1750_WMAC_CALDATA_OFFSET, mac1);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_ESR1750, "ESR1750",
"EnGenius ESR1750",
esr1750_setup);