openwrt/target/linux/lantiq/dts/ARV7506PW11.dts
Andreas Eberlein eba84bee4c lantiq: Sanitize device tree files
The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes.

This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend.

Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
[sanitize all device tree files]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:55:04 +02:00

154 lines
2.8 KiB
Plaintext

/dts-v1/;
#include "danube.dtsi"
/ {
model = "ARV7506PW11 - Alice/O2 IAD 4421";
aliases {
led-boot = &power;
led-failsafe = &power_red;
led-running = &power;
led-dsl = &dsl;
led-internet = &internet;
led-wifi = &wlan;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7a0000>;
};
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
};
};
/* GPIO 19: switch reset */
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
wlan: wlan {
label = "arv7506pw11:green:wlan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
power: power {
label = "arv7506pw11:green:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv7506pw11:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet: internet {
label = "arv7506pw11:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power_red {
label = "arv7506pw11:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "arv7506pw11:red:internet";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
info {
label = "arv7506pw11:green:info";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
telefon {
label = "arv7506pw11:green:telefon";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
info_red {
label = "arv7506pw11:red:info";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
};