mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
549f8694c3
Add kmod-ramoops to the default set of device packages in R7800 and XR500, so that the ramoops kernel crash logs are provided by default for these routers. The capability was earlier defined by97158fe1andcf346dfa, but the feature was not yet turned on by default. The possible kernel crashes are stored into /sys/fs/pstore/* Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
464 lines
12 KiB
Makefile
464 lines
12 KiB
Makefile
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
DEVICE_VARS += TPLINK_BOARD_ID
|
|
|
|
define Device/kernel-size-migration
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := *** Kernel partition size has changed from earlier \
|
|
versions. You need to sysupgrade with the OpenWrt factory image and \
|
|
use the force flag when image check fails. Settings will be lost. ***
|
|
endef
|
|
|
|
define Build/buffalo-rootfs-cksum
|
|
( \
|
|
echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
|
|
$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
|
|
) >> $@
|
|
endef
|
|
|
|
define Build/edimax-header
|
|
$(eval edimax_model=$(word 1,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
|
-b -s CSYS -m $(edimax_model) \
|
|
-f 0x70000 -S 0x1200000 \
|
|
-i $@ -o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/TpSafeImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
TPLINK_BOARD_ID :=
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
IMAGE/sysupgrade.bin := append-rootfs | \
|
|
tplink-safeloader sysupgrade | append-metadata
|
|
endef
|
|
|
|
define Device/ZyXELImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
pad-to $$(KERNEL_SIZE)
|
|
KERNEL_NAME := zImage
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | \
|
|
pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | \
|
|
pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/askey_rt4230w-rev6
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Askey
|
|
DEVICE_MODEL := RT4230W
|
|
DEVICE_VARIANT := REV6
|
|
SOC := qcom-ipq8065
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
KERNEL_IN_UBI := 1
|
|
endef
|
|
TARGET_DEVICES += askey_rt4230w-rev6
|
|
|
|
define Device/asrock_g10
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := ASRock
|
|
DEVICE_MODEL := G10
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 5332k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
|
|
IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
|
|
endef
|
|
TARGET_DEVICES += asrock_g10
|
|
|
|
define Device/buffalo_wxr-2533dhp
|
|
$(call Device/LegacyImage)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WXR-2533DHP
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
|
|
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-2533dhp
|
|
|
|
define Device/compex_wpq864
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPQ864
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := qcom-ipq8064
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpq864
|
|
|
|
define Device/edgecore_ecw5410
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := ECW5410
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@v2.0-ap160
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct \
|
|
ipq-wifi-edgecore_ecw5410
|
|
endef
|
|
TARGET_DEVICES += edgecore_ecw5410
|
|
|
|
define Device/linksys_ea7500-v1
|
|
$(call Device/LegacyImage)
|
|
$(Device/kernel-size-migration)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 4096k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
append-uImage-fakehdr filesystem
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | pad-to $$$$(PAGESIZE)
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7500-v1
|
|
|
|
define Device/linksys_ea8500
|
|
$(call Device/LegacyImage)
|
|
$(Device/kernel-size-migration)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA8500
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 4096k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
append-uImage-fakehdr filesystem
|
|
BOARD_NAME := ea8500
|
|
SUPPORTED_DEVICES += ea8500
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8500
|
|
|
|
define Device/meraki_mr42
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
DEVICE_MODEL := MR42
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_LOADADDR = 0x44208000
|
|
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
-uboot-envtools ath10k-firmware-qca9887-ct \
|
|
ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
|
kmod-leds-tlc591xx
|
|
endef
|
|
TARGET_DEVICES += meraki_mr42
|
|
|
|
define Device/meraki_mr52
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
DEVICE_MODEL := MR52
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_LOADADDR = 0x44208000
|
|
DEVICE_DTS_CONFIG := config@2
|
|
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
-uboot-envtools ath10k-firmware-qca9887-ct \
|
|
ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
|
kmod-leds-tlc591xx
|
|
endef
|
|
TARGET_DEVICES += meraki_mr52
|
|
|
|
define Device/nec_wg2600hp
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG2600HP
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := wg2600hp
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp
|
|
|
|
define Device/nec_wg2600hp3
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC Platforms
|
|
DEVICE_MODEL := Aterm WG2600HP3
|
|
SOC := qcom-ipq8062
|
|
BLOCKSIZE := 64k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp3
|
|
|
|
define Device/netgear_d7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 D7800
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := D7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := d7800
|
|
SUPPORTED_DEVICES += d7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Sysupgrade does not work due to rootfs ubi partition size change. \
|
|
Use factory image with the TFTP recovery flash routine.
|
|
endef
|
|
TARGET_DEVICES += netgear_d7800
|
|
|
|
define Device/netgear_r7500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500
|
|
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500
|
|
SUPPORTED_DEVICES += r7500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500
|
|
|
|
define Device/netgear_r7500v2
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v2
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500v2
|
|
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500v2
|
|
SUPPORTED_DEVICES += r7500v2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct \
|
|
ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500v2
|
|
|
|
define Device/netgear_r7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4S R7800
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7800
|
|
SUPPORTED_DEVICES += r7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops
|
|
endef
|
|
TARGET_DEVICES += netgear_r7800
|
|
|
|
define Device/netgear_xr500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk XR500
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := XR500
|
|
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops
|
|
endef
|
|
TARGET_DEVICES += netgear_xr500
|
|
|
|
define Device/qcom_ipq8064-ap148
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := standard
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES += ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148
|
|
|
|
define Device/qcom_ipq8064-ap148-legacy
|
|
$(call Device/LegacyImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := legacy
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
|
|
|
define Device/qcom_ipq8064-ap161
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP161
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap161
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap161
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap161
|
|
|
|
define Device/qcom_ipq8064-db149
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := DB149
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-db149
|
|
KERNEL_INSTALL := 1
|
|
BOARD_NAME := db149
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-db149
|
|
|
|
define Device/tplink_ad7200
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := AD7200
|
|
DEVICE_VARIANT := v1/v2
|
|
DEVICE_ALT0_VENDOR := TP-Link
|
|
DEVICE_ALT0_MODEL := Talon AD7200
|
|
DEVICE_ALT0_VARIANT := v1/v2
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
TPLINK_BOARD_ID := AD7200
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
|
|
endef
|
|
TARGET_DEVICES += tplink_ad7200
|
|
|
|
define Device/tplink_c2600
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C2600
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := c2600
|
|
SUPPORTED_DEVICES += c2600
|
|
TPLINK_BOARD_ID := C2600
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += tplink_c2600
|
|
|
|
define Device/tplink_vr2600v
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer VR2600v
|
|
DEVICE_VARIANT := v1
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
IMAGE_SIZE := 12672k
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := vr2600v
|
|
SUPPORTED_DEVICES += vr2600v
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | \
|
|
append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_vr2600v
|
|
|
|
define Device/ubnt_unifi-ac-hd
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi AC HD
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 14784k
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-ac-hd
|
|
|
|
define Device/zyxel_nbg6817
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NBG6817
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := nbg6817
|
|
RAS_BOARD := NBG6817
|
|
RAS_ROOTFS_SIZE := 20934k
|
|
RAS_VERSION := "V1.99(OWRT.9999)C0"
|
|
SUPPORTED_DEVICES += nbg6817
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \
|
|
kmod-fs-ext4 losetup
|
|
$(call Device/ZyXELImage)
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6817
|