openwrt/package/boot/uboot-envtools/files
Sven Eckelmann eaf2e32c12 ath79: Add support for OpenMesh A60
Device specifications:
======================

* Qualcomm/Atheros QCA9558 ver 1 rev 0
* 720/600/240 MHz (CPU/DDR/AHB)
* 128 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 3T3R 2.4 GHz Wi-Fi (11n)
* 3T3R 5 GHz Wi-Fi (11ac)
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x ethernet
  - eth0
    + Label: Ethernet 1
    + AR8035 ethernet PHY (RGMII)
    + 10/100/1000 Mbps Ethernet
    + 802.3af POE
    + used as WAN interface
  - eth1
    + Label: Ethernet 2
    + AR8031 ethernet PHY (SGMII)
    + 10/100/1000 Mbps Ethernet
    + used as LAN interface
* 1x USB
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2021-06-05 01:17:11 +02:00
..
apm821xx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
ath79 ath79: Add support for OpenMesh A60 2021-06-05 01:17:11 +02:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx6 uboot-envtools: imx6: drop redundant space after case keywords 2021-04-10 15:18:21 +02:00
ipq40xx uboot-envtools: ipq40xx: drop redundant space after case keywords 2021-04-10 15:18:27 +02:00
ipq806x uboot-envtools: ipq806x: drop redundant space after case keywords 2021-04-10 15:18:32 +02:00
kirkwood uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape uboot-envtools: layerscape: drop redundant space after case keywords 2021-04-10 15:18:41 +02:00
mediatek uboot-envtools: change size for unifi-6-lr 2021-05-07 22:50:22 +01:00
mpc85xx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
mvebu uboot-envtools: mvebu: add Buffalo LS421DE 2021-04-17 22:44:09 +01:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
oxnas uboot-envtools: oxnas: drop redundant space after case keywords 2021-04-10 15:18:48 +02:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
ramips ramips: add support for JCG Q20 2021-05-26 23:10:45 +02:00
realtek uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00