openwrt/target/linux/lantiq/files-4.14/arch/mips/boot/dts
Danijel Tudek eae6cac6a3 lantiq: add support for AVM FRITZ!Box 7362 SL
Hardware:
- SoC: Lantiq VRX288
- RAM: Winbond W971GG6JB 1 Gb (128 MiB)
- Flash:
  - SPI: 8 Mb (1 MiB) for bootloader and tffs
  - NAND: 1 Gb (128 MiB) for OS
- xDSL: Lantiq VRX208
- WLAN: Atheros AR9381
- DECT: Dialog Semiconductors SC14441

Everything except FXS/DECT works
(no drivers for AVM's FXS implementation with SC14441).

Installation via FTP:
1. Use scripts/flashing/eva_ramboot.py to send initramfs-kernel.bin
to the device when powering on.
Standard AVM procedures with finding the correct IP address and
the right moment to open FTP apply here (approx. 4 seconds on 7362SL).
IMPORTANT: set lzma compression in ramdisk options, bootloader stalls
when receiving uncompressed images.

2. Transfer sysupgrade.bin image with scp to /tmp directory
and run sysupgrade

3. First boot might take a bit longer if linux_fs_start was set to 1,
in that case the device will reboot twice, first time it will fail to load
second kernel (overwritten by ubifs), set linux_fs_start to 0 and reboot.

OpenWrt uses the entire NAND flash. Kernel uses 4 MiB and rootfs uses
the rest of 124 MiB, overwriting everything related to FRITZ!OS - both
OS images, config and answering machine/media server data.
To return to FRITZ!OS, use AVM's recovery image.

Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>
2019-03-10 16:49:31 +01:00
..
ACMP252.dts lantiq: kernel 4.14: use vbus-supply devicetree property 2018-05-17 07:40:19 +02:00
ALL0333CJ.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
amazonse.dtsi lantiq: kernel 4.14: update dts files 2018-02-20 19:25:17 +01:00
ar9.dtsi lantiq: kernel 4.14: update dts files 2018-02-20 19:25:17 +01:00
ARV452CQW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV752DPW22.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV752DPW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV4510PW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV4518PWR01.dts
ARV4518PWR01.dtsi lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV4518PWR01A.dts
ARV4519PW.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ARV4520PW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV4525PW.dts
ARV7506PW11.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV7510PW22.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV7518PW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV7519PW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV7519RW22.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV7525PW.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ARV8539PW22.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
ASL56026.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
BTHOMEHUBV2B.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
BTHOMEHUBV3A.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
BTHOMEHUBV5A.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
danube.dtsi lantiq: kernel 4.14: update dts files 2018-02-20 19:25:17 +01:00
DGN1000B.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
DGN3500.dts
DGN3500.dtsi lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
DGN3500B.dts
DM200.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
EASY50712.dts
EASY50810.dts
EASY80920.dtsi lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
EASY80920NAND.dts
EASY80920NOR.dts
EASY88388.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
EASY88444.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
EASY98000-base.dtsi
EASY98000NAND.dts
EASY98000NOR.dts
EASY98000SFLASH.dts
EASY98020.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
EASY98020V18.dts
EASY98021.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
EASY98035SYNCE1588.dts
EASY98035SYNCE.dts
FALCON-MDU.dts
falcon-sflash-16M.dtsi
FALCON-SFP.dts
falcon.dtsi
FRITZ736X.dtsi lantiq: move common FRITZ736X bits into dtsi 2019-03-10 16:49:31 +01:00
FRITZ3370-REV2-HYNIX.dts lantiq: make AVM FRITZ!Box naming consistent 2019-01-26 10:41:26 +01:00
FRITZ3370-REV2-MICRON.dts lantiq: make AVM FRITZ!Box naming consistent 2019-01-26 10:41:26 +01:00
FRITZ3370-REV2.dtsi lantiq: make AVM FRITZ!Box naming consistent 2019-01-26 10:41:26 +01:00
FRITZ7312.dts lantiq: make AVM FRITZ!Box naming consistent 2019-01-26 10:41:26 +01:00
FRITZ7320.dts lantiq: Add support for 2nd USB port on Fritz!Box 7320 and 7330 2019-01-26 10:42:19 +01:00
FRITZ7360SL.dts lantiq: move common FRITZ736X bits into dtsi 2019-03-10 16:49:31 +01:00
FRITZ7362SL.dts lantiq: add support for AVM FRITZ!Box 7362 SL 2019-03-10 16:49:31 +01:00
FRITZ7412.dts lantiq: add support for AVM FRITZ!Box 7412 2019-03-10 16:49:31 +01:00
GIGASX76X.dts lantiq: kernel 4.14: use vbus-supply devicetree property 2018-05-17 07:40:19 +02:00
H201L.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
P2601HNFX.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
P2812HNUF1.dts lantiq: enlarge ZyXEL P-2812HNU-F1 kernel partition (FS#2124) 2019-03-06 21:58:59 +01:00
P2812HNUF3.dts
P2812HNUFX.dtsi lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
TDW89X0.dtsi lantiq: kernel 4.14: use vbus-supply devicetree property 2018-05-17 07:40:19 +02:00
TDW8970.dts
TDW8980.dts
VG3503J.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
VGV7510KW22.dtsi lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
VGV7510KW22BRN.dts
VGV7510KW22NOR.dts
VGV7519.dtsi lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
VGV7519BRN.dts
VGV7519NOR.dts
vr9.dtsi lantiq: kernel 4.14: fix vr9 reboot mask 2018-04-04 09:09:51 +02:00
VR200.dts lantiq: enable FXS ports on VR200v 2018-11-26 12:30:33 +01:00
VR200.dtsi lantiq: enable FXS ports on VR200v 2018-11-26 12:30:33 +01:00
VR200v.dts lantiq: enable FXS ports on VR200v 2018-11-26 12:30:33 +01:00
WBMR300.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00
WBMR.dts lantiq: add support for upgrade led 2018-08-16 21:20:57 +02:00