mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-02 01:08:05 +00:00
0432b504a5
Hak5 Packet Squirrel is a pocket-sized device dedicated for pentesters (MITM attacks). This device is based on Atheros AR9331 but it lacks WiFi. Support for it was first introduced in 950b278c81 (ar71xx). Specifications: - Atheros AR9331 - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 2x RJ45 10/100 Mbps Ethernet (AR9331) - 1x USB 2.0 - 1x RGB LED, 1x button, 1x 4-way mechanical switch - 1x Micro USB Type-B for main power input Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: maurerr <mariusd84@gmail.com>
65 lines
1.2 KiB
Plaintext
65 lines
1.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar9331_hak5_lan-turtle.dtsi"
|
|
|
|
/ {
|
|
model = "Hak5 Packet Squirrel";
|
|
compatible = "hak5,packet-squirrel", "qca,ar9331";
|
|
|
|
aliases {
|
|
led-boot = &led_system_green;
|
|
led-failsafe = &led_system_green;
|
|
led-running = &led_system_green;
|
|
led-upgrade = &led_system_green;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_system_green: system-green {
|
|
label = "packet-squirrel:green:system";
|
|
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
system-blue {
|
|
label = "packet-squirrel:blue:system";
|
|
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
system-red {
|
|
label = "packet-squirrel:red:system";
|
|
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&keys {
|
|
sw1 {
|
|
label = "sw1";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
sw2 {
|
|
label = "sw2";
|
|
linux,code = <BTN_1>;
|
|
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
sw3 {
|
|
label = "sw3";
|
|
linux,code = <BTN_2>;
|
|
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
sw4 {
|
|
label = "sw4";
|
|
linux,code = <BTN_3>;
|
|
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|