mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
401 lines
14 KiB
Diff
401 lines
14 KiB
Diff
From c58b398221d88ac0db29c3bb7522a4f48dfa102c Mon Sep 17 00:00:00 2001
|
|
From: Yuan Yao <yao.yuan@freescale.com>
|
|
Date: Tue, 17 Nov 2015 16:13:47 +0800
|
|
Subject: [PATCH 087/113] mtd: spi-nor: fsl-quadspi: add big-endian support
|
|
|
|
Add R/W functions for big- or little-endian registers:
|
|
The qSPI controller's endian is independent of the CPU core's endian.
|
|
So far, the qSPI have two versions for big-endian and little-endian.
|
|
|
|
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
|
|
Acked-by: Han xu <han.xu@freescale.com>
|
|
---
|
|
drivers/mtd/spi-nor/fsl-quadspi.c | 157 +++++++++++++++++++++++--------------
|
|
1 file changed, 97 insertions(+), 60 deletions(-)
|
|
|
|
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
@@ -275,6 +275,7 @@ struct fsl_qspi {
|
|
u32 clk_rate;
|
|
unsigned int chip_base_addr; /* We may support two chips. */
|
|
bool has_second_chip;
|
|
+ bool big_endian;
|
|
struct mutex lock;
|
|
struct pm_qos_request pm_qos_req;
|
|
};
|
|
@@ -300,6 +301,28 @@ static inline int needs_wakeup_wait_mode
|
|
}
|
|
|
|
/*
|
|
+ * R/W functions for big- or little-endian registers:
|
|
+ * The qSPI controller's endian is independent of the CPU core's endian.
|
|
+ * So far, although the CPU core is little-endian but the qSPI have two
|
|
+ * versions for big-endian and little-endian.
|
|
+ */
|
|
+static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr)
|
|
+{
|
|
+ if (q->big_endian)
|
|
+ iowrite32be(val, addr);
|
|
+ else
|
|
+ iowrite32(val, addr);
|
|
+}
|
|
+
|
|
+static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr)
|
|
+{
|
|
+ if (q->big_endian)
|
|
+ return ioread32be(addr);
|
|
+ else
|
|
+ return ioread32(addr);
|
|
+}
|
|
+
|
|
+/*
|
|
* An IC bug makes us to re-arrange the 32-bit data.
|
|
* The following chips, such as IMX6SLX, have fixed this bug.
|
|
*/
|
|
@@ -310,14 +333,14 @@ static inline u32 fsl_qspi_endian_xchg(s
|
|
|
|
static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
|
|
{
|
|
- writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
|
|
- writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
|
|
+ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
|
|
+ qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
|
|
}
|
|
|
|
static inline void fsl_qspi_lock_lut(struct fsl_qspi *q)
|
|
{
|
|
- writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
|
|
- writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
|
|
+ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
|
|
+ qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
|
|
}
|
|
|
|
static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
|
|
@@ -326,8 +349,8 @@ static irqreturn_t fsl_qspi_irq_handler(
|
|
u32 reg;
|
|
|
|
/* clear interrupt */
|
|
- reg = readl(q->iobase + QUADSPI_FR);
|
|
- writel(reg, q->iobase + QUADSPI_FR);
|
|
+ reg = qspi_readl(q, q->iobase + QUADSPI_FR);
|
|
+ qspi_writel(q, reg, q->iobase + QUADSPI_FR);
|
|
|
|
if (reg & QUADSPI_FR_TFF_MASK)
|
|
complete(&q->c);
|
|
@@ -348,7 +371,7 @@ static void fsl_qspi_init_lut(struct fsl
|
|
|
|
/* Clear all the LUT table */
|
|
for (i = 0; i < QUADSPI_LUT_NUM; i++)
|
|
- writel(0, base + QUADSPI_LUT_BASE + i * 4);
|
|
+ qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
|
|
|
|
/* Quad Read */
|
|
lut_base = SEQID_QUAD_READ * 4;
|
|
@@ -364,14 +387,15 @@ static void fsl_qspi_init_lut(struct fsl
|
|
dummy = 8;
|
|
}
|
|
|
|
- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
|
|
base + QUADSPI_LUT(lut_base));
|
|
- writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
|
|
+ qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
|
|
base + QUADSPI_LUT(lut_base + 1));
|
|
|
|
/* Write enable */
|
|
lut_base = SEQID_WREN * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base));
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN),
|
|
+ base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Page Program */
|
|
lut_base = SEQID_PP * 4;
|
|
@@ -385,13 +409,15 @@ static void fsl_qspi_init_lut(struct fsl
|
|
addrlen = ADDR32BIT;
|
|
}
|
|
|
|
- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
|
|
base + QUADSPI_LUT(lut_base));
|
|
- writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
|
|
+ qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
|
|
+ base + QUADSPI_LUT(lut_base + 1));
|
|
|
|
/* Read Status */
|
|
lut_base = SEQID_RDSR * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) |
|
|
+ LUT1(FSL_READ, PAD1, 0x1),
|
|
base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Erase a sector */
|
|
@@ -400,40 +426,46 @@ static void fsl_qspi_init_lut(struct fsl
|
|
cmd = q->nor[0].erase_opcode;
|
|
addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
|
|
|
|
- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
|
|
base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Erase the whole chip */
|
|
lut_base = SEQID_CHIP_ERASE * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
|
|
base + QUADSPI_LUT(lut_base));
|
|
|
|
/* READ ID */
|
|
lut_base = SEQID_RDID * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) |
|
|
+ LUT1(FSL_READ, PAD1, 0x8),
|
|
base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Write Register */
|
|
lut_base = SEQID_WRSR * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) |
|
|
+ LUT1(FSL_WRITE, PAD1, 0x2),
|
|
base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Read Configuration Register */
|
|
lut_base = SEQID_RDCR * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1),
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) |
|
|
+ LUT1(FSL_READ, PAD1, 0x1),
|
|
base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Write disable */
|
|
lut_base = SEQID_WRDI * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base));
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI),
|
|
+ base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Enter 4 Byte Mode (Micron) */
|
|
lut_base = SEQID_EN4B * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base));
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B),
|
|
+ base + QUADSPI_LUT(lut_base));
|
|
|
|
/* Enter 4 Byte Mode (Spansion) */
|
|
lut_base = SEQID_BRWR * 4;
|
|
- writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base));
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
|
|
+ base + QUADSPI_LUT(lut_base));
|
|
|
|
fsl_qspi_lock_lut(q);
|
|
}
|
|
@@ -488,15 +520,16 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c
|
|
q->chip_base_addr, addr, len, cmd);
|
|
|
|
/* save the reg */
|
|
- reg = readl(base + QUADSPI_MCR);
|
|
+ reg = qspi_readl(q, base + QUADSPI_MCR);
|
|
|
|
- writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR);
|
|
- writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
|
|
+ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
|
|
+ base + QUADSPI_SFAR);
|
|
+ qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
|
|
base + QUADSPI_RBCT);
|
|
- writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
|
|
+ qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
|
|
|
|
do {
|
|
- reg2 = readl(base + QUADSPI_SR);
|
|
+ reg2 = qspi_readl(q, base + QUADSPI_SR);
|
|
if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) {
|
|
udelay(1);
|
|
dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2);
|
|
@@ -507,21 +540,22 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c
|
|
|
|
/* trigger the LUT now */
|
|
seqid = fsl_qspi_get_seqid(q, cmd);
|
|
- writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
|
|
+ qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len,
|
|
+ base + QUADSPI_IPCR);
|
|
|
|
/* Wait for the interrupt. */
|
|
if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) {
|
|
dev_err(q->dev,
|
|
"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n",
|
|
- cmd, addr, readl(base + QUADSPI_FR),
|
|
- readl(base + QUADSPI_SR));
|
|
+ cmd, addr, qspi_readl(q, base + QUADSPI_FR),
|
|
+ qspi_readl(q, base + QUADSPI_SR));
|
|
err = -ETIMEDOUT;
|
|
} else {
|
|
err = 0;
|
|
}
|
|
|
|
/* restore the MCR */
|
|
- writel(reg, base + QUADSPI_MCR);
|
|
+ qspi_writel(q, reg, base + QUADSPI_MCR);
|
|
|
|
return err;
|
|
}
|
|
@@ -533,7 +567,7 @@ static void fsl_qspi_read_data(struct fs
|
|
int i = 0;
|
|
|
|
while (len > 0) {
|
|
- tmp = readl(q->iobase + QUADSPI_RBDR + i * 4);
|
|
+ tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4);
|
|
tmp = fsl_qspi_endian_xchg(q, tmp);
|
|
dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
|
|
q->chip_base_addr, tmp);
|
|
@@ -561,9 +595,9 @@ static inline void fsl_qspi_invalid(stru
|
|
{
|
|
u32 reg;
|
|
|
|
- reg = readl(q->iobase + QUADSPI_MCR);
|
|
+ reg = qspi_readl(q, q->iobase + QUADSPI_MCR);
|
|
reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
|
|
- writel(reg, q->iobase + QUADSPI_MCR);
|
|
+ qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
|
|
|
|
/*
|
|
* The minimum delay : 1 AHB + 2 SFCK clocks.
|
|
@@ -572,7 +606,7 @@ static inline void fsl_qspi_invalid(stru
|
|
udelay(1);
|
|
|
|
reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
|
|
- writel(reg, q->iobase + QUADSPI_MCR);
|
|
+ qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
|
|
}
|
|
|
|
static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
|
|
@@ -586,20 +620,20 @@ static int fsl_qspi_nor_write(struct fsl
|
|
q->chip_base_addr, to, count);
|
|
|
|
/* clear the TX FIFO. */
|
|
- tmp = readl(q->iobase + QUADSPI_MCR);
|
|
- writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
|
|
+ tmp = qspi_readl(q, q->iobase + QUADSPI_MCR);
|
|
+ qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
|
|
|
|
/* fill the TX data to the FIFO */
|
|
for (j = 0, i = ((count + 3) / 4); j < i; j++) {
|
|
tmp = fsl_qspi_endian_xchg(q, *txbuf);
|
|
- writel(tmp, q->iobase + QUADSPI_TBDR);
|
|
+ qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
|
|
txbuf++;
|
|
}
|
|
|
|
/* fill the TXFIFO upto 16 bytes for i.MX7d */
|
|
if (needs_fill_txfifo(q))
|
|
for (; i < 4; i++)
|
|
- writel(tmp, q->iobase + QUADSPI_TBDR);
|
|
+ qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
|
|
|
|
/* Trigger it */
|
|
ret = fsl_qspi_runcmd(q, opcode, to, count);
|
|
@@ -615,10 +649,10 @@ static void fsl_qspi_set_map_addr(struct
|
|
int nor_size = q->nor_size;
|
|
void __iomem *base = q->iobase;
|
|
|
|
- writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
|
|
- writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
|
|
- writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
|
|
- writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
|
|
+ qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
|
|
+ qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
|
|
+ qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
|
|
+ qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
|
|
}
|
|
|
|
/*
|
|
@@ -640,24 +674,26 @@ static void fsl_qspi_init_abh_read(struc
|
|
int seqid;
|
|
|
|
/* AHB configuration for access buffer 0/1/2 .*/
|
|
- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
|
|
- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
|
|
- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
|
|
+ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
|
|
+ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
|
|
+ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
|
|
/*
|
|
* Set ADATSZ with the maximum AHB buffer size to improve the
|
|
* read performance.
|
|
*/
|
|
- writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8)
|
|
- << QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR);
|
|
+ qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
|
|
+ ((q->devtype_data->ahb_buf_size / 8)
|
|
+ << QUADSPI_BUF3CR_ADATSZ_SHIFT),
|
|
+ base + QUADSPI_BUF3CR);
|
|
|
|
/* We only use the buffer3 */
|
|
- writel(0, base + QUADSPI_BUF0IND);
|
|
- writel(0, base + QUADSPI_BUF1IND);
|
|
- writel(0, base + QUADSPI_BUF2IND);
|
|
+ qspi_writel(q, 0, base + QUADSPI_BUF0IND);
|
|
+ qspi_writel(q, 0, base + QUADSPI_BUF1IND);
|
|
+ qspi_writel(q, 0, base + QUADSPI_BUF2IND);
|
|
|
|
/* Set the default lut sequence for AHB Read. */
|
|
seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
|
|
- writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
|
|
+ qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
|
|
q->iobase + QUADSPI_BFGENCR);
|
|
}
|
|
|
|
@@ -713,7 +749,7 @@ static int fsl_qspi_nor_setup(struct fsl
|
|
return ret;
|
|
|
|
/* Reset the module */
|
|
- writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
|
|
+ qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
|
|
base + QUADSPI_MCR);
|
|
udelay(1);
|
|
|
|
@@ -721,24 +757,24 @@ static int fsl_qspi_nor_setup(struct fsl
|
|
fsl_qspi_init_lut(q);
|
|
|
|
/* Disable the module */
|
|
- writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
|
|
+ qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
|
|
base + QUADSPI_MCR);
|
|
|
|
- reg = readl(base + QUADSPI_SMPR);
|
|
- writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK
|
|
+ reg = qspi_readl(q, base + QUADSPI_SMPR);
|
|
+ qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
|
|
| QUADSPI_SMPR_FSPHS_MASK
|
|
| QUADSPI_SMPR_HSENA_MASK
|
|
| QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
|
|
|
|
/* Enable the module */
|
|
- writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
|
|
+ qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
|
|
base + QUADSPI_MCR);
|
|
|
|
/* clear all interrupt status */
|
|
- writel(0xffffffff, q->iobase + QUADSPI_FR);
|
|
+ qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR);
|
|
|
|
/* enable the interrupt */
|
|
- writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
|
|
+ qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
|
|
|
|
return 0;
|
|
}
|
|
@@ -954,6 +990,7 @@ static int fsl_qspi_probe(struct platfor
|
|
if (IS_ERR(q->iobase))
|
|
return PTR_ERR(q->iobase);
|
|
|
|
+ q->big_endian = of_property_read_bool(np, "big-endian");
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"QuadSPI-memory");
|
|
if (!devm_request_mem_region(dev, res->start, resource_size(res),
|
|
@@ -1101,8 +1138,8 @@ static int fsl_qspi_remove(struct platfo
|
|
}
|
|
|
|
/* disable the hardware */
|
|
- writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
|
|
- writel(0x0, q->iobase + QUADSPI_RSER);
|
|
+ qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
|
|
+ qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER);
|
|
|
|
mutex_destroy(&q->lock);
|
|
|