openwrt/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts
Adrian Schmutzler e6a181dcea ramips: simplify status for ehci/ohci on mt7628 TP-Link devices
At the moment, ehci/ohci is enabled in mt7628an SoC DTSI, then
disabled in the TP-Link-specific DTSI files, and finally enabled
again in the DTS files of the devices needing it.

This on-off-on scheme is hard to grasp on a quick look. Thus, this
patch drops the status in the TP-Link-specific DTSI files, having
the TP-Link devices treated like the rest of mt7628an DTSes, i.e.
ehci/ohci is enabled by default and needs to be disabled explicitly
where needed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-12-07 14:22:00 +01:00

76 lines
1.2 KiB
Plaintext

#include "mt7628an_tplink_8m.dtsi"
/ {
compatible = "tplink,tl-wa801nd-v5", "mediatek,mt7628an-soc";
model = "TP-Link TL-WA801ND v5";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
};
lan {
label = "green:lan";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wlan {
label = "green:wlan";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps_red {
label = "red:wps";
gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
};
wps_green {
label = "green:wps";
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
};
};
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};
&state_default {
gpio {
groups = "p0led_an", "p1led_an", "perst", "refclk",
"uart1", "wdt", "wled_an";
function = "gpio";
};
};