mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
1f5ea4eae4
Instead of renaming the default wireless led attached to the wireless chip, add a new led using the platform leds with the phy0tpt trigger set in userspace. When switching ar71xx to device tree, the same can be done by using the build in GPIO controller and without adding new bindings. Drop the now unused platform code. Signed-off-by: Mathias Kresin <dev@kresin.me>
246 lines
7.6 KiB
C
246 lines
7.6 KiB
C
/*
|
|
* NETGEAR WNR2200 board support
|
|
*
|
|
* Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/kernel.h> /* for max() macro */
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
|
|
#include "common.h" /* needed to disable switch LEDs */
|
|
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "machtypes.h"
|
|
|
|
/* WNR2200 - connected through AR7241 */
|
|
#define WNR2200_GPIO_LED_LAN2_AMBER 0
|
|
#define WNR2200_GPIO_LED_LAN4_AMBER 1
|
|
#define WNR2200_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
|
|
#define WNR2200_GPIO_LED_WPS_GREEN 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
|
|
#define WNR2200_GPIO_LED_USB_GREEN 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
|
|
#define WNR2200_GPIO_LED_LAN3_AMBER 11
|
|
#define WNR2200_GPIO_LED_WAN_AMBER 12
|
|
#define WNR2200_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */
|
|
#define WNR2200_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */
|
|
#define WNR2200_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */
|
|
#define WNR2200_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */
|
|
#define WNR2200_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */
|
|
|
|
/* WNR2200 - connected through AR9287 */
|
|
#define WNR2200_GPIO_WMAC_LED_WLAN_BLUE 0
|
|
#define WNR2200_GPIO_WMAC_LED_TEST_AMBER 1
|
|
#define WNR2200_GPIO_WMAC_LED_POWER_GREEN 2
|
|
#define WNR2200_GPIO_WMAC_BTN_RFKILL 3
|
|
#define WNR2200_GPIO_WMAC_USB_5V 4
|
|
#define WNR2200_GPIO_WMAC_BTN_WPS 5
|
|
#define WNR2200_GPIO_WMAC_BTN_RESET 6
|
|
|
|
#define WNR2200_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define WNR2200_KEYS_DEBOUNCE_INTERVAL (3 * WNR2200_KEYS_POLL_INTERVAL)
|
|
|
|
#define WNR2200_MAC0_OFFSET 0
|
|
#define WNR2200_MAC1_OFFSET 6
|
|
#define WNR2200_PCIE_CALDATA_OFFSET 0x1000
|
|
#define WNR2200_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */
|
|
|
|
static struct gpio_led wnr2200_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "netgear:amber:lan1",
|
|
.gpio = WNR2200_GPIO_LED_LAN1_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:amber:lan2",
|
|
.gpio = WNR2200_GPIO_LED_LAN2_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:amber:lan3",
|
|
.gpio = WNR2200_GPIO_LED_LAN3_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:amber:lan4",
|
|
.gpio = WNR2200_GPIO_LED_LAN4_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:amber:wan",
|
|
.gpio = WNR2200_GPIO_LED_WAN_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:lan1",
|
|
.gpio = WNR2200_GPIO_LED_LAN1_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:lan2",
|
|
.gpio = WNR2200_GPIO_LED_LAN2_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:lan3",
|
|
.gpio = WNR2200_GPIO_LED_LAN3_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:lan4",
|
|
.gpio = WNR2200_GPIO_LED_LAN4_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:usb",
|
|
.gpio = WNR2200_GPIO_LED_USB_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:wan",
|
|
.gpio = WNR2200_GPIO_LED_WAN_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:wps",
|
|
.gpio = WNR2200_GPIO_LED_WPS_GREEN,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_led wnr2200_wmac_leds_gpio[] = {
|
|
{
|
|
.name = "netgear:amber:test",
|
|
.gpio = WNR2200_GPIO_WMAC_LED_TEST_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "netgear:green:power",
|
|
.gpio = WNR2200_GPIO_WMAC_LED_POWER_GREEN,
|
|
.active_low = 1,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "netgear:blue:wlan",
|
|
.gpio = WNR2200_GPIO_WMAC_LED_WLAN_BLUE,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button wnr2200_wmac_keys_gpio[] = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = WNR2200_GPIO_WMAC_BTN_RESET,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "rfkill",
|
|
.type = EV_KEY,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = WNR2200_GPIO_WMAC_BTN_RFKILL,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "wps",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = WNR2200_GPIO_WMAC_BTN_WPS,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* For WNR2200 ART flash area used for WLAN MAC is usually empty (0xff)
|
|
* so ath9k driver uses random MAC instead each time module is loaded.
|
|
* OpenWrt's original fix was to copy eth1 address to WLAN interface.
|
|
* New solution does not duplicate hardware addresses and is taken from
|
|
* WNR2000v3 code. It assigns permanent WLAN MAC equal to ethN's MAC
|
|
* plus 1, so network interfaces get sequential addresses.
|
|
* If ART wireless MAC address field has been filled by user, use it.
|
|
*/
|
|
static void __init wnr2200_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset,
|
|
int mac1_art_offset, int wmac_art_offset)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset);
|
|
u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset);
|
|
u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset);
|
|
|
|
/* only 0xff if all bits are set - address is invalid, empty area */
|
|
if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] &
|
|
wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) {
|
|
memcpy(wmac_gen_addr, eth0_mac_addr, 5);
|
|
wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1;
|
|
|
|
/* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */
|
|
if (!wmac_gen_addr[5])
|
|
wmac_gen_addr[5] = 1;
|
|
} else
|
|
memcpy(wmac_gen_addr, wlan_mac_addr, 6);
|
|
}
|
|
|
|
static void __init wnr2200_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
u8 wlan_mac_addr[6];
|
|
|
|
/*
|
|
* Disable JTAG to use all AR724X GPIO LEDs. Disable CLKs.
|
|
* Allow OS to control all link LEDs.
|
|
*/
|
|
ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
|
|
AR724X_GPIO_FUNC_UART_EN,
|
|
AR724X_GPIO_FUNC_CLK_OBS1_EN |
|
|
AR724X_GPIO_FUNC_CLK_OBS2_EN |
|
|
AR724X_GPIO_FUNC_CLK_OBS3_EN |
|
|
AR724X_GPIO_FUNC_CLK_OBS4_EN |
|
|
AR724X_GPIO_FUNC_CLK_OBS5_EN |
|
|
AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + WNR2200_MAC0_OFFSET, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + WNR2200_MAC1_OFFSET, 0);
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
|
ath79_eth1_data.phy_mask = 0x10;
|
|
|
|
ath79_register_eth(0);
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET,
|
|
WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET);
|
|
ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
|
|
wnr2200_leds_gpio);
|
|
|
|
ap9x_pci_setup_wmac_leds(0, wnr2200_wmac_leds_gpio,
|
|
ARRAY_SIZE(wnr2200_wmac_leds_gpio));
|
|
|
|
/* All 3 buttons are connected to wireless chip */
|
|
ap9x_pci_setup_wmac_btns(0, wnr2200_wmac_keys_gpio,
|
|
ARRAY_SIZE(wnr2200_wmac_keys_gpio),
|
|
WNR2200_KEYS_POLL_INTERVAL);
|
|
|
|
/* enable power for the USB port */
|
|
ap9x_pci_setup_wmac_gpio(0, BIT(WNR2200_GPIO_WMAC_USB_5V),
|
|
BIT(WNR2200_GPIO_WMAC_USB_5V));
|
|
|
|
ath79_register_usb();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_WNR2200, "WNR2200", "NETGEAR WNR2200", wnr2200_setup);
|