mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
c79c001b59
All leds on these boards are green. v1 has RFKILL GPIO 23 for production units (it had GPIO 13 only for test phase units, and these are rather very rare to find). As for the previous attempt to fix this and revert due to WDR boards have blue leds, it was wrong: WDR board does not use common setup (false). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
303 lines
8.2 KiB
C
303 lines
8.2 KiB
C
/*
|
|
* TP-LINK Archer C5/C7/TL-WDR4900 v2 board support
|
|
*
|
|
* Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2014 施康成 <tenninjas@tenninjas.ca>
|
|
* Copyright (c) 2014 Imre Kaloz <kaloz@openwrt.org>
|
|
*
|
|
* Based on the Qualcomm Atheros AP135/AP136 reference board support code
|
|
* Copyright (c) 2012 Qualcomm Atheros
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
|
|
#define ARCHER_C7_GPIO_LED_WLAN2G 12
|
|
#define ARCHER_C7_GPIO_LED_SYSTEM 14
|
|
#define ARCHER_C7_GPIO_LED_QSS 15
|
|
#define ARCHER_C7_GPIO_LED_WLAN5G 17
|
|
#define ARCHER_C7_GPIO_LED_USB1 18
|
|
#define ARCHER_C7_GPIO_LED_USB2 19
|
|
|
|
#define ARCHER_C7_GPIO_BTN_RFKILL 23
|
|
#define ARCHER_C7_V2_GPIO_BTN_RFKILL 23
|
|
#define ARCHER_C7_GPIO_BTN_RESET 16
|
|
|
|
#define ARCHER_C7_GPIO_USB1_POWER 22
|
|
#define ARCHER_C7_GPIO_USB2_POWER 21
|
|
|
|
#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
|
|
|
|
#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
|
|
#define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000
|
|
|
|
static const char *archer_c7_part_probes[] = {
|
|
"tp-link",
|
|
NULL,
|
|
};
|
|
|
|
static struct flash_platform_data archer_c7_flash_data = {
|
|
.part_probes = archer_c7_part_probes,
|
|
};
|
|
|
|
static struct gpio_led archer_c7_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tp-link:green:qss",
|
|
.gpio = ARCHER_C7_GPIO_LED_QSS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:system",
|
|
.gpio = ARCHER_C7_GPIO_LED_SYSTEM,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:wlan2g",
|
|
.gpio = ARCHER_C7_GPIO_LED_WLAN2G,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:wlan5g",
|
|
.gpio = ARCHER_C7_GPIO_LED_WLAN5G,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:usb1",
|
|
.gpio = ARCHER_C7_GPIO_LED_USB1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:usb2",
|
|
.gpio = ARCHER_C7_GPIO_LED_USB2,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ARCHER_C7_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "RFKILL switch",
|
|
.type = EV_SW,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ARCHER_C7_GPIO_BTN_RFKILL,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button archer_c7_v2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ARCHER_C7_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "RFKILL switch",
|
|
.type = EV_SW,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ARCHER_C7_V2_GPIO_BTN_RFKILL,
|
|
},
|
|
};
|
|
|
|
static const struct ar8327_led_info archer_c7_leds_ar8327[] = {
|
|
AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"),
|
|
AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"),
|
|
AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
|
|
AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"),
|
|
AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"),
|
|
};
|
|
|
|
/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
|
|
static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
|
|
static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = {
|
|
.led_ctrl0 = 0xc737c737,
|
|
.led_ctrl1 = 0x00000000,
|
|
.led_ctrl2 = 0x00000000,
|
|
.led_ctrl3 = 0x0030c300,
|
|
.open_drain = false,
|
|
};
|
|
|
|
static struct ar8327_platform_data archer_c7_ar8327_data = {
|
|
.pad0_cfg = &archer_c7_ar8327_pad0_cfg,
|
|
.pad6_cfg = &archer_c7_ar8327_pad6_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.port6_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.led_cfg = &archer_c7_ar8327_led_cfg,
|
|
.num_leds = ARRAY_SIZE(archer_c7_leds_ar8327),
|
|
.leds = archer_c7_leds_ar8327,
|
|
};
|
|
|
|
static struct mdio_board_info archer_c7_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.mdio_addr = 0,
|
|
.platform_data = &archer_c7_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init common_setup(bool pcie_slot)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
u8 tmpmac[ETH_ALEN];
|
|
|
|
ath79_register_m25p80(&archer_c7_flash_data);
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
|
|
archer_c7_leds_gpio);
|
|
|
|
ath79_init_mac(tmpmac, mac, -1);
|
|
ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac);
|
|
|
|
if (pcie_slot) {
|
|
ath79_register_pci();
|
|
} else {
|
|
ath79_init_mac(tmpmac, mac, -1);
|
|
ap9x_pci_setup_wmac_led_pin(0, 0);
|
|
ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac);
|
|
}
|
|
|
|
mdiobus_register_board_info(archer_c7_mdio0_info,
|
|
ARRAY_SIZE(archer_c7_mdio0_info));
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
|
|
|
/* GMAC0 is connected to the RMGII interface */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x56000000;
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the SGMII interface */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
|
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
|
|
ath79_register_eth(1);
|
|
|
|
gpio_request_one(ARCHER_C7_GPIO_USB1_POWER,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB1 power");
|
|
gpio_request_one(ARCHER_C7_GPIO_USB2_POWER,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB2 power");
|
|
ath79_register_usb();
|
|
}
|
|
|
|
static void __init archer_c5_setup(void)
|
|
{
|
|
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(archer_c7_gpio_keys),
|
|
archer_c7_gpio_keys);
|
|
common_setup(true);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5",
|
|
archer_c5_setup);
|
|
|
|
static void __init archer_c7_setup(void)
|
|
{
|
|
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(archer_c7_gpio_keys),
|
|
archer_c7_gpio_keys);
|
|
common_setup(true);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7",
|
|
archer_c7_setup);
|
|
|
|
static void __init archer_c7_v2_setup(void)
|
|
{
|
|
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(archer_c7_v2_gpio_keys),
|
|
archer_c7_v2_gpio_keys);
|
|
common_setup(true);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V2, "ARCHER-C7-V2", "TP-LINK Archer C7",
|
|
archer_c7_v2_setup);
|
|
|
|
static void __init tl_wdr4900_v2_setup(void)
|
|
{
|
|
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(archer_c7_gpio_keys),
|
|
archer_c7_gpio_keys);
|
|
common_setup(false);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2",
|
|
tl_wdr4900_v2_setup)
|
|
|