openwrt/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts
Nikolay Martynov c527073b38 ath79: fix mac address on eap2x5-1port devices
Commit e816591e22 ("ath79: qca: convert to nvmem-layout") mistakenly
switched the source of the mac address from the 'info' to 'art'
partition.

This patch updates all devices that share same 'parent' device tree file
and was tested to fix the problem for eap225-outdoor-v3 - device that I
actually own.

Fixes: e816591e22 ("ath79: qca: convert to nvmem-layout")
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2024-01-23 10:41:20 +01:00

65 lines
1.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "tplink,eap225-outdoor-v1", "qca,qca9563";
model = "TP-Link EAP225-Outdoor v1";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_amber;
led-running = &led_status_green;
led-upgrade = &led_status_amber;
};
leds {
compatible = "gpio-leds";
led_status_green: status_green {
label = "green:status";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_amber: status_amber {
label = "amber:status";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
};
&art {
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precalibration_ath10k: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
&eth0 {
phy-handle = <&phy4>;
phy-mode = "sgmii";
};
&mdio0 {
phy4: ethernet-phy@4 {
reg = <4>;
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
&pcie {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
nvmem-cells = <&macaddr_info_8 1>, <&precalibration_ath10k>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};