openwrt/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
Shiji Yang 2f1c62e5af
ath79: convert ath10k calibration data to NVMEM (binary MAC)
This patch converts ath10k calibration data to NVMEM format for
wave 1 devices with mtd binary MAC address. The "calibration"
NVMEM cell size is 0x844. The MAC addresses are assigned via dts.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-01 17:09:02 +01:00

206 lines
3.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
model = "TP-Link TL-WR902AC v1";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &wmac;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
internet {
label = "green:internet";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "green:wlan2g";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
usb {
label = "green:usb";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wps {
label = "green:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
lan {
label = "green:lan";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
sw1 {
label = "Mode switch 1";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
sw2 {
label = "Mode switch 2";
linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x730000>;
};
info: partition@750000 {
label = "info";
reg = <0x750000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
compatible = "mac-base";
reg = <0x8 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@760000 {
label = "tplink";
reg = <0x760000 0x090000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_info_8 1>;
nvmem-cell-names = "mac-address";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_info_8 0>;
nvmem-cell-names = "mac-address";
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0050";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>, <&macaddr_info_8 (-1)>;
nvmem-cell-names = "calibration", "mac-address";
};
};
&usb_phy {
status = "okay";
};
&usb0 {
status = "okay";
};