This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Go to file
Felix Fietkau e91fb05b72 ath10k-firmware: update firmware version for QCA988X (again)
Updates the ath10-firmware release to current git and updates the
QCA988X firmware in use to version 10.2.4.70.12-2 which appears to
actually fix the stability problems when using a Nexus 5X phone as
per issue #20854. Also updates the Makefile for a change in the
location of the board.bin file for QCA988X in the source repository.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>

SVN-Revision: 47469
2015-11-15 21:33:01 +00:00
config kernel: add support for KERNEL_CGROUP_PIDS 2015-10-26 11:54:56 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include ipq806x: enable vfpv4 support and set cpu type to cortex-a9 2015-11-14 14:22:24 +00:00
package ath10k-firmware: update firmware version for QCA988X (again) 2015-11-15 21:33:01 +00:00
scripts scripts/diffconfig.sh: reduce config output with CONFIG_BUSYBOX_CUSTOM 2015-11-13 11:34:18 +00:00
target ipq806x: enable vfpv4 support and set cpu type to cortex-a9 2015-11-14 14:22:24 +00:00
toolchain gcc: set the isl/cloog prefix when graphite is enabled, disable it explicitly if it is disabled in the config 2015-11-13 11:35:41 +00:00
tools tools: add isl (used for graphite on GCC 5) 2015-11-13 11:35:37 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
rules.mk gcc: remove version 4.6, it is no longer needed 2015-11-10 21:10:53 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org