openwrt/target/linux/mediatek
Robert Senderek e8f7597317 mediatek: filogic: add support for Cudy RE3000 v1
MT7981B /256MB /16MB SPI (XM25QH128C)
AX 2.4Ghz
AX 5Ghz 160Mhz wide
1Gbit LAN

OEM:
root@RE3000:~# ifconfig |grep HWaddr
br-lan    Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0 (label)
br-wan    Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
eth0      Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
ra0       Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
ra2       Link encap:Ethernet  HWaddr 82:XX:XX:28:XX:X0
rax0      Link encap:Ethernet  HWaddr 82:XX:XX:38:XX:X0
rax2      Link encap:Ethernet  HWaddr 82:XX:XX:58:XX:X0

OpenWrt
root@OpenWrt:/# ifconfig |grep HW
br-lan    Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
eth0      Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
phy0-ap0  Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
phy1-ap0  Link encap:Ethernet  HWaddr 82:XX:XX:08:XX:X1

 tftp Installation via u-boot:

Connect TTL3.3V converter
connector is under the radiator Set speed 115200 8 N 1
Interrupt boot process by holding down-arrow key during boot then
>> 6. Load image
>> 0 - TFTP client (Default)
enter IP adresses and initramfs-kernel.bin

write to flash via sysupgrade or gui

Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
2024-02-29 21:16:27 +01:00
..
base-files mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
dts mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
files kernel: allow skipping deprecated uImage.FIT partition parser 2024-02-15 19:06:36 +00:00
files-6.1 mediatek: filogic: fix mt7981 DT nodenames 2024-02-20 12:42:28 +01:00
filogic mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
image mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
mt7622 mediatek: include 'fitblk' package for subtargets 2024-02-26 02:13:08 +00:00
mt7623 mediatek: include 'fitblk' package for subtargets 2024-02-26 02:13:08 +00:00
mt7629 mediatek: switch to Linux version 6.1 2024-02-15 19:06:36 +00:00
patches-6.1 mediatek: mt7623: bpi-r2: set root=/dev/fit0 in bootargs 2024-02-24 17:02:35 +00:00
Makefile mediatek: switch to Linux version 6.1 2024-02-15 19:06:36 +00:00
modules.mk mediatek: mt7623: build mt6577_auxadc driver into kernel 2022-12-05 23:14:36 +00:00