openwrt/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch
Koen Vandeputte 4e0c54bc5b kernel: add support for kernel 5.4
The following patches were removed because they are integrated in the upstream kernel 5.4:
 * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
 * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
 * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
 * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
 * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
 * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
 * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
 * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
 * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
 * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
 * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
 * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
 * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
 * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
 * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
 * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
 * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
 * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
 * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
 * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
 * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
 * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
 * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
 * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
 * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
 * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
 * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
 * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
 * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
 * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
 * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
 * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
 * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
 * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
 * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
 * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
 * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
 * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
 * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
 * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
 * pending-5.4/220-optimize_inlining.patch
 * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
 * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
 * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
 * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch

Some bigger changes were done to this feature and we did not port this patch yet:
 * hack-5.4/207-disable-modorder.patch

This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes:
 * hack-5.4/930-crashlog.patch

A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations.
 * pending-5.4/304-mips_disable_fpu.patch

- no crashlog support yet as a required file got deleted upstream
- Removed patch below, which is now seen as a recursive dependency [1]
- Removed patch below due to build error [2]
- fix still required to avoid identical function def [3]
- Fixes included from Blocktrron
- Fixes included from Chunkeey
- Fix included from nbd regarding "dst leak in Flow Offload"

[1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
[2] target/linux/generic/hack-5.4/207-disable-modorder.patch
[3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:45 +01:00

75 lines
1.9 KiB
Diff

From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 2 Oct 2019 10:31:10 +0100
Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses
Some SFP+ modules have PHYs on them just like SFP modules do, except
they are Clause 45 PHYs. The I2C protocol used to access them is
modified slightly in order to send the device address and 16-bit
register index.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
--- a/drivers/net/phy/mdio-i2c.c
+++ b/drivers/net/phy/mdio-i2c.c
@@ -33,17 +33,24 @@ static int i2c_mii_read(struct mii_bus *
{
struct i2c_adapter *i2c = bus->priv;
struct i2c_msg msgs[2];
- u8 data[2], dev_addr = reg;
+ u8 addr[3], data[2], *p;
int bus_addr, ret;
if (!i2c_mii_valid_phy_id(phy_id))
return 0xffff;
+ p = addr;
+ if (reg & MII_ADDR_C45) {
+ *p++ = 0x20 | ((reg >> 16) & 31);
+ *p++ = reg >> 8;
+ }
+ *p++ = reg;
+
bus_addr = i2c_mii_phy_addr(phy_id);
msgs[0].addr = bus_addr;
msgs[0].flags = 0;
- msgs[0].len = 1;
- msgs[0].buf = &dev_addr;
+ msgs[0].len = p - addr;
+ msgs[0].buf = addr;
msgs[1].addr = bus_addr;
msgs[1].flags = I2C_M_RD;
msgs[1].len = sizeof(data);
@@ -61,18 +68,23 @@ static int i2c_mii_write(struct mii_bus
struct i2c_adapter *i2c = bus->priv;
struct i2c_msg msg;
int ret;
- u8 data[3];
+ u8 data[5], *p;
if (!i2c_mii_valid_phy_id(phy_id))
return 0;
- data[0] = reg;
- data[1] = val >> 8;
- data[2] = val;
+ p = data;
+ if (reg & MII_ADDR_C45) {
+ *p++ = (reg >> 16) & 31;
+ *p++ = reg >> 8;
+ }
+ *p++ = reg;
+ *p++ = val >> 8;
+ *p++ = val;
msg.addr = i2c_mii_phy_addr(phy_id);
msg.flags = 0;
- msg.len = 3;
+ msg.len = p - data;
msg.buf = data;
ret = i2c_transfer(i2c, &msg, 1);