openwrt/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts
Rosen Penev e816591e22 ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

89 lines
1.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
/ {
model = "ELECOM WRC-1750GHBK2-I/C";
compatible = "elecom,wrc-1750ghbk2-i", "qca,qca9563";
};
&leds {
led_power: power {
label = "blue:power";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "blue:wlan5g";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0xf70000>;
};
partition@fe0000 {
label = "hwconfig";
reg = <0xfe0000 0x010000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: cal@1000 {
reg = <0x1000 0x440>;
};
macaddr_art_1002: macaddr@1002 {
reg = <0x1002 0x6>;
};
cal_art_5000: cal@5000 {
reg = <0x5000 0x844>;
};
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0 0 0 0 0>;
nvmem-cells = <&cal_art_5000>;
nvmem-cell-names = "calibration";
};
};
&eth0 {
nvmem-cells = <&macaddr_art_1002>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(-1)>;
};
&wmac {
nvmem-cells = <&cal_art_1000>;
nvmem-cell-names = "calibration";
};