openwrt/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts
Rosen Penev e816591e22 ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

176 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,eap225-wall-v2", "qca,qca9561";
model = "TP-Link EAP225-Wall v2";
aliases {
label-mac-device = &eth1;
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
led {
label = "LED button";
linux,code = <KEY_LIGHTS_TOGGLE>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "white:status";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
gpio-export {
compatible = "gpio-export";
poe_passthrough {
gpio-export,name = "tp-link:poe-passthrough:enable";
gpio-export,output = <0>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
mac-address-increment = <1>;
nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "partition-table";
reg = <0x020000 0x010000>;
read-only;
};
info: partition@30000 {
label = "info";
reg = <0x030000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};
};
partition@40000 {
compatible = "openwrt,elf";
label = "firmware";
reg = <0x040000 0xd80000>;
};
partition@dc0000 {
label = "config";
reg = <0xdc0000 0x030000>;
read-only;
};
/* df0000-f30000 undefined in vendor firmware */
partition@f30000 {
label = "mutil-log";
reg = <0xf30000 0x080000>;
read-only;
};
partition@fb0000 {
label = "oops";
reg = <0xfb0000 0x040000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
calibration_ath9k: calibration@1000 {
reg = <0x1000 0x440>;
};
precalibration_ath10k: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
};
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_info_8>, <&calibration_ath9k>;
nvmem-cell-names = "mac-address", "calibration";
};