openwrt/target/linux/ath79/dts/qca9558_comfast_cf-e380ac-v2.dts
Rosen Penev e816591e22 ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

151 lines
2.4 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "comfast,cf-e380ac-v2", "qca,qca9558";
model = "COMFAST CF-E380AC";
aliases {
serial0 = &uart;
label-mac-device = &eth1;
led-boot = &led_lan;
led-failsafe = &led_lan;
led-upgrade = &led_lan;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
led_lan: lan {
label = "green:lan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "red:wlan5g";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <1200>;
always-running;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
art: partition@40000 {
label = "art";
reg = <0x040000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x0fa0000>;
};
partition@ff0000 {
label = "art-backup";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
pll-data = <0xbe000000 0xb0000101 0xb0001313>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&pcie0 {
status = "okay";
};
&wdt {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
mac-address-increment = <10>;
};