Joan Moreau e80922e7b0 ath79: add support for KuWfi WB5G08 ... Short specifications: - QCA9563+9886 - 1x 100/1000 Mbps Ethernet, passive PoE support - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz with external PA, up to 25 dBm (316mW) - 2x internal 18 dBi antennas - 8x LED, 1x button Flash instructions 1. Connect PC with 192.168.0.141 to WAN port 2. Install a TFTP server on your PC ('atftp' is doing the job for instance) 3. Copy your firmware in the TFTP folder as upgrade.bin 4. Power up device pushing the 'reset' button 5. The device shall upload upgrade.bin, install it and reboot 6. Device shall be booting on 192.168.1.1 as default Signed-off-by: Joan Moreau <jom@grosjo.net>		2024-12-17 17:15:12 +00:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:29 +02:00
dts	ath79: add support for KuWfi WB5G08	2024-12-17 17:15:12 +00:00
files	treewide: remove THIS_MODULE assignment	2024-11-10 02:16:31 +01:00
generic	ath79: add support for KuWfi WB5G08	2024-12-17 17:15:12 +00:00
image	ath79: add support for KuWfi WB5G08	2024-12-17 17:15:12 +00:00
mikrotik	generic: platform/mikrotik: add wlan lz77 decompress	2024-10-08 10:45:58 +02:00
nand	ath79: gl-e750: use nvmem for mac addresses	2024-12-08 23:36:24 +01:00
patches-6.6	ath79: usb: remove reset names	2024-12-13 15:29:04 +01:00
tiny	ath79: pqi-air-pen: adjust mac addresses	2024-12-13 15:29:04 +01:00
config-6.6	kernel: filter out compiler opts from config	2024-11-17 14:55:16 +01:00
Makefile	ath79: switch default kernel to 6.6	2024-06-14 17:38:09 +02:00
modules.mk