mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
95b0c07a61
Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M FLASH: 128M NAND ETH: QCA8075 VDSL: Intel/Lantiq VRX518 PCIe attached currently not supported DECT: Dialog SC14448 currently not supported WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac LED: - Power/DSL green - WLAN green - FON/DECT green - Connect/WPS green - Info green - Info red BTN: - WLAN - FON - WPS/Connect UART: 115200n8 3.3V (located under the Dialog chip) VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz7530' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ7530.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz7530.bin uboot0 > mtd write /path/to/uboot-fritz7530.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> [removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> |
||
---|---|---|
.. | ||
030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch | ||
031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch | ||
040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch | ||
050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch | ||
050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch | ||
050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch | ||
050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch | ||
070-qcom-spm-fix-probe-order.patch | ||
071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch | ||
072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch | ||
073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch | ||
074-ARM-qcom-Add-IPQ4019-SoC-support.patch | ||
075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch | ||
076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch | ||
077-qcom-ipq4019-add-USB-devicetree-nodes.patch | ||
078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch | ||
079-ARM-dts-ipq4019-fix-PCI-range.patch | ||
080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch | ||
081-clk-fix-apss-cpu-overclocking.patch | ||
082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch | ||
083-mtd-nand-add-Winbond-manufacturer-and-chip.patch | ||
084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch | ||
085-mtd-nand-add-macronix-mx35lf1ge4ab.patch | ||
086-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch | ||
087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch | ||
303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch | ||
700-net-add-qualcomm-mdio-and-phy.patch | ||
701-dts-ipq4019-add-mdio-node.patch | ||
702-dts-ipq4019-add-PHY-switch-nodes.patch | ||
703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | ||
710-net-add-qualcomm-essedma-ethernet-driver.patch | ||
711-dts-ipq4019-add-ethernet-essedma-node.patch | ||
712-mr33-essedma.patch | ||
713-essedma-alloc-skb-ip-align.patch | ||
850-soc-add-qualcomm-syscon.patch | ||
900-dts-ipq4019-ap-dk01.1.patch | ||
901-arm-boot-add-dts-files.patch | ||
997-device_tree_cmdline.patch |