mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
c78e4fb220
This patch adds support for Huawei E970 wireless gateway devices. It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV. E960/B970 should work too, from what I know it's basically the same hardware. The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem. It uses a hardware watchdog which needs GPIO-7 to be toggled at least every 1-2 seconds. This patch uses gpio_wdt module (see my previous patch today) to take care of this. Tested and works: 3G wan, wlan+LED, VLAN config, failsafe using reset button, image to be used for upgrade from OEM firmware's web interface Link to the wiki page I've created: <http://wiki.openwrt.org/toh/huawei/e970> Issue: * lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog reset during kernel decompress. Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> SVN-Revision: 38011
14 lines
419 B
Diff
14 lines
419 B
Diff
--- a/arch/mips/bcm47xx/setup.c
|
|
+++ b/arch/mips/bcm47xx/setup.c
|
|
@@ -122,6 +122,10 @@ static int bcm47xx_get_invariants(struct
|
|
if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
|
|
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
|
|
|
|
+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
|
|
+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
|
|
+ iv->has_cardbus_slot = 0;
|
|
+
|
|
return 0;
|
|
}
|
|
|