mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
16364e4100
Backport QCA807x PHY patches merged upstream that introduce the new concept of PHY package. Also add in generic config the new Kconfig CONFIG_QCA807X_PHY. All affected patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
327 lines
9.6 KiB
Diff
327 lines
9.6 KiB
Diff
From f508a226b517a6a8afd78a317de46bc83e3e3d51 Mon Sep 17 00:00:00 2001
|
|
From: Christian Marangi <ansuelsmth@gmail.com>
|
|
Date: Tue, 6 Feb 2024 18:31:13 +0100
|
|
Subject: [PATCH 10/10] net: phy: qca807x: add support for configurable LED
|
|
|
|
QCA8072/5 have up to 2 LEDs attached for PHY.
|
|
|
|
LEDs can be configured to be ON/hw blink or be set to HW control.
|
|
|
|
Hw blink mode is set to blink at 4Hz or 250ms.
|
|
|
|
PHY can support both copper (TP) or fiber (FIBRE) kind and supports
|
|
different HW control modes based on the port type.
|
|
|
|
HW control modes supported for netdev trigger for copper ports are:
|
|
- LINK_10
|
|
- LINK_100
|
|
- LINK_1000
|
|
- TX
|
|
- RX
|
|
- FULL_DUPLEX
|
|
- HALF_DUPLEX
|
|
|
|
HW control modes supported for netdev trigger for fiber ports are:
|
|
- LINK_100
|
|
- LINK_1000
|
|
- TX
|
|
- RX
|
|
- FULL_DUPLEX
|
|
- HALF_DUPLEX
|
|
|
|
LED support conflicts with GPIO controller feature and must be disabled
|
|
if gpio-controller is used for the PHY.
|
|
|
|
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/phy/qcom/qca807x.c | 256 ++++++++++++++++++++++++++++++++-
|
|
1 file changed, 254 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/net/phy/qcom/qca807x.c
|
|
+++ b/drivers/net/phy/qcom/qca807x.c
|
|
@@ -57,8 +57,18 @@
|
|
#define QCA807X_MMD7_LED_CTRL(x) (0x8074 + ((x) * 2))
|
|
#define QCA807X_MMD7_LED_FORCE_CTRL(x) (0x8075 + ((x) * 2))
|
|
|
|
-#define QCA807X_GPIO_FORCE_EN BIT(15)
|
|
-#define QCA807X_GPIO_FORCE_MODE_MASK GENMASK(14, 13)
|
|
+/* LED hw control pattern for fiber port */
|
|
+#define QCA807X_LED_FIBER_PATTERN_MASK GENMASK(11, 1)
|
|
+#define QCA807X_LED_FIBER_TXACT_BLK_EN BIT(10)
|
|
+#define QCA807X_LED_FIBER_RXACT_BLK_EN BIT(9)
|
|
+#define QCA807X_LED_FIBER_FDX_ON_EN BIT(6)
|
|
+#define QCA807X_LED_FIBER_HDX_ON_EN BIT(5)
|
|
+#define QCA807X_LED_FIBER_1000BX_ON_EN BIT(2)
|
|
+#define QCA807X_LED_FIBER_100FX_ON_EN BIT(1)
|
|
+
|
|
+/* Some device repurpose the LED as GPIO out */
|
|
+#define QCA807X_GPIO_FORCE_EN QCA808X_LED_FORCE_EN
|
|
+#define QCA807X_GPIO_FORCE_MODE_MASK QCA808X_LED_FORCE_MODE_MASK
|
|
|
|
#define QCA807X_FUNCTION_CONTROL 0x10
|
|
#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK GENMASK(6, 5)
|
|
@@ -121,6 +131,233 @@ static int qca807x_cable_test_start(stru
|
|
return 0;
|
|
}
|
|
|
|
+static int qca807x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
|
|
+ u16 *offload_trigger)
|
|
+{
|
|
+ /* Parsing specific to netdev trigger */
|
|
+ switch (phydev->port) {
|
|
+ case PORT_TP:
|
|
+ if (test_bit(TRIGGER_NETDEV_TX, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_TX_BLINK;
|
|
+ if (test_bit(TRIGGER_NETDEV_RX, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_RX_BLINK;
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_SPEED10_ON;
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_SPEED100_ON;
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_SPEED1000_ON;
|
|
+ if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
|
|
+ if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
|
|
+ *offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
|
|
+ break;
|
|
+ case PORT_FIBRE:
|
|
+ if (test_bit(TRIGGER_NETDEV_TX, &rules))
|
|
+ *offload_trigger |= QCA807X_LED_FIBER_TXACT_BLK_EN;
|
|
+ if (test_bit(TRIGGER_NETDEV_RX, &rules))
|
|
+ *offload_trigger |= QCA807X_LED_FIBER_RXACT_BLK_EN;
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
|
|
+ *offload_trigger |= QCA807X_LED_FIBER_100FX_ON_EN;
|
|
+ if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
|
|
+ *offload_trigger |= QCA807X_LED_FIBER_1000BX_ON_EN;
|
|
+ if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
|
|
+ *offload_trigger |= QCA807X_LED_FIBER_HDX_ON_EN;
|
|
+ if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
|
|
+ *offload_trigger |= QCA807X_LED_FIBER_FDX_ON_EN;
|
|
+ break;
|
|
+ default:
|
|
+ return -EOPNOTSUPP;
|
|
+ }
|
|
+
|
|
+ if (rules && !*offload_trigger)
|
|
+ return -EOPNOTSUPP;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int qca807x_led_hw_control_enable(struct phy_device *phydev, u8 index)
|
|
+{
|
|
+ u16 reg;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ return qca808x_led_reg_hw_control_enable(phydev, reg);
|
|
+}
|
|
+
|
|
+static int qca807x_led_hw_is_supported(struct phy_device *phydev, u8 index,
|
|
+ unsigned long rules)
|
|
+{
|
|
+ u16 offload_trigger = 0;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ return qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
|
|
+}
|
|
+
|
|
+static int qca807x_led_hw_control_set(struct phy_device *phydev, u8 index,
|
|
+ unsigned long rules)
|
|
+{
|
|
+ u16 reg, mask, offload_trigger = 0;
|
|
+ int ret;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ ret = qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ ret = qca807x_led_hw_control_enable(phydev, index);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ switch (phydev->port) {
|
|
+ case PORT_TP:
|
|
+ reg = QCA807X_MMD7_LED_CTRL(index);
|
|
+ mask = QCA808X_LED_PATTERN_MASK;
|
|
+ break;
|
|
+ case PORT_FIBRE:
|
|
+ /* HW control pattern bits are in LED FORCE reg */
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ mask = QCA807X_LED_FIBER_PATTERN_MASK;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, mask,
|
|
+ offload_trigger);
|
|
+}
|
|
+
|
|
+static bool qca807x_led_hw_control_status(struct phy_device *phydev, u8 index)
|
|
+{
|
|
+ u16 reg;
|
|
+
|
|
+ if (index > 1)
|
|
+ return false;
|
|
+
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ return qca808x_led_reg_hw_control_status(phydev, reg);
|
|
+}
|
|
+
|
|
+static int qca807x_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|
+ unsigned long *rules)
|
|
+{
|
|
+ u16 reg;
|
|
+ int val;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Check if we have hw control enabled */
|
|
+ if (qca807x_led_hw_control_status(phydev, index))
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Parsing specific to netdev trigger */
|
|
+ switch (phydev->port) {
|
|
+ case PORT_TP:
|
|
+ reg = QCA807X_MMD7_LED_CTRL(index);
|
|
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
|
|
+ if (val & QCA808X_LED_TX_BLINK)
|
|
+ set_bit(TRIGGER_NETDEV_TX, rules);
|
|
+ if (val & QCA808X_LED_RX_BLINK)
|
|
+ set_bit(TRIGGER_NETDEV_RX, rules);
|
|
+ if (val & QCA808X_LED_SPEED10_ON)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_10, rules);
|
|
+ if (val & QCA808X_LED_SPEED100_ON)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_100, rules);
|
|
+ if (val & QCA808X_LED_SPEED1000_ON)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_1000, rules);
|
|
+ if (val & QCA808X_LED_HALF_DUPLEX_ON)
|
|
+ set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
|
|
+ if (val & QCA808X_LED_FULL_DUPLEX_ON)
|
|
+ set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
|
|
+ break;
|
|
+ case PORT_FIBRE:
|
|
+ /* HW control pattern bits are in LED FORCE reg */
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
|
|
+ if (val & QCA807X_LED_FIBER_TXACT_BLK_EN)
|
|
+ set_bit(TRIGGER_NETDEV_TX, rules);
|
|
+ if (val & QCA807X_LED_FIBER_RXACT_BLK_EN)
|
|
+ set_bit(TRIGGER_NETDEV_RX, rules);
|
|
+ if (val & QCA807X_LED_FIBER_100FX_ON_EN)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_100, rules);
|
|
+ if (val & QCA807X_LED_FIBER_1000BX_ON_EN)
|
|
+ set_bit(TRIGGER_NETDEV_LINK_1000, rules);
|
|
+ if (val & QCA807X_LED_FIBER_HDX_ON_EN)
|
|
+ set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
|
|
+ if (val & QCA807X_LED_FIBER_FDX_ON_EN)
|
|
+ set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int qca807x_led_hw_control_reset(struct phy_device *phydev, u8 index)
|
|
+{
|
|
+ u16 reg, mask;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ switch (phydev->port) {
|
|
+ case PORT_TP:
|
|
+ reg = QCA807X_MMD7_LED_CTRL(index);
|
|
+ mask = QCA808X_LED_PATTERN_MASK;
|
|
+ break;
|
|
+ case PORT_FIBRE:
|
|
+ /* HW control pattern bits are in LED FORCE reg */
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ mask = QCA807X_LED_FIBER_PATTERN_MASK;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, mask);
|
|
+}
|
|
+
|
|
+static int qca807x_led_brightness_set(struct phy_device *phydev,
|
|
+ u8 index, enum led_brightness value)
|
|
+{
|
|
+ u16 reg;
|
|
+ int ret;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* If we are setting off the LED reset any hw control rule */
|
|
+ if (!value) {
|
|
+ ret = qca807x_led_hw_control_reset(phydev, index);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ return qca808x_led_reg_brightness_set(phydev, reg, value);
|
|
+}
|
|
+
|
|
+static int qca807x_led_blink_set(struct phy_device *phydev, u8 index,
|
|
+ unsigned long *delay_on,
|
|
+ unsigned long *delay_off)
|
|
+{
|
|
+ u16 reg;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
|
|
+ return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
|
|
+}
|
|
+
|
|
#ifdef CONFIG_GPIOLIB
|
|
static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
@@ -496,6 +733,16 @@ static int qca807x_probe(struct phy_devi
|
|
"qcom,dac-disable-bias-current-tweak");
|
|
|
|
if (IS_ENABLED(CONFIG_GPIOLIB)) {
|
|
+ /* Make sure we don't have mixed leds node and gpio-controller
|
|
+ * to prevent registering leds and having gpio-controller usage
|
|
+ * conflicting with them.
|
|
+ */
|
|
+ if (of_find_property(node, "leds", NULL) &&
|
|
+ of_find_property(node, "gpio-controller", NULL)) {
|
|
+ phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive.");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
/* Do not register a GPIO controller unless flagged for it */
|
|
if (of_property_read_bool(node, "gpio-controller")) {
|
|
ret = qca807x_gpio(phydev);
|
|
@@ -580,6 +827,11 @@ static struct phy_driver qca807x_drivers
|
|
.suspend = genphy_suspend,
|
|
.cable_test_start = qca807x_cable_test_start,
|
|
.cable_test_get_status = qca808x_cable_test_get_status,
|
|
+ .led_brightness_set = qca807x_led_brightness_set,
|
|
+ .led_blink_set = qca807x_led_blink_set,
|
|
+ .led_hw_is_supported = qca807x_led_hw_is_supported,
|
|
+ .led_hw_control_set = qca807x_led_hw_control_set,
|
|
+ .led_hw_control_get = qca807x_led_hw_control_get,
|
|
},
|
|
};
|
|
module_phy_driver(qca807x_drivers);
|