Marcel Jost e6f047fa36 ramips: add TP-Link TL-WR802N-v4 support ... This patch adds support for the TP-Link TL-WR802N-v4. https://openwrt.org/toh/tp-link/tl-wr802n Specification: - MT7628N (580 MHz) - 64 MB RAM - 8 MB FLASH - 2T2R 2.4 GHz - 1x 10/100 Mbps Ethernet - 1x LED Flash instruction: The only way to flash the image in TL-WR802N v4 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-wr802n-v4-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 10 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Marcel Jost <majo@icutech.ch>		2019-02-28 11:26:10 +01:00
..
01_leds	ramips: use generic board detection for Wavlink WL-WN575A3	2019-02-28 11:26:10 +01:00
02_network	ramips: add TP-Link TL-WR802N-v4 support	2019-02-28 11:26:10 +01:00
03_gpio_switches	ramips: cleanup the RB750Gr3 support	2019-01-05 12:28:22 +01:00