openwrt/target/linux/ramips/image
Óscar García Amor 62efb34071 ramips: add support for Cudy WR1300 v2
Specifications:
 - SoC: MediaTek MT7621AT
 - RAM: 128 MB (DDR3)
 - Flash: 16 MB (SPI NOR)
 - WiFi: MediaTek MT7603E, MediaTek MT7613BE
 - Switch: 1 WAN, 4 LAN (Gigabit)
 - Ports: 1 USB 3.0
 - Buttons: Reset, WPS
 - LEDs: System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS
 - Power: DC 12V 1A tip positive

Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.

Recovery:
 - Loads only signed manufacture firmware due to bootloader RSA verification
 - serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
 - connect to any lan ethernet port
 - power on the device while holding the reset button
 - wait at least 8 seconds before releasing reset button for image to
   download
 - See http://www.cudytech.com/newsinfo/547425.html

Signed-off-by: Óscar García Amor <ogarcia@connectical.com>
2022-11-12 18:15:55 +01:00
..
lzma-loader ramips: lzma-loader: make FLASH_START configurable 2020-09-03 14:15:30 +02:00
common-sercomm.mk ramips: add support for Beeline SmartBox GIGA 2022-07-03 20:25:38 +02:00
common-tp-link.mk treewide: call check-size before append-metadata 2021-07-10 19:40:10 +02:00
Makefile ramips: define lzma-loader recipe for SEAMA devices 2022-11-12 18:15:55 +01:00
mt76x8.mk ramips: add RT-N600 alternative name to RT-AC1200 2022-09-11 01:30:11 +02:00
mt7620.mk ramips: add support for Youku X2 2022-11-05 21:12:24 +01:00
mt7621.mk ramips: add support for Cudy WR1300 v2 2022-11-12 18:15:55 +01:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: add support for ZyXEL Keenetic 4G Rev.B Device 2022-09-13 01:01:52 +09:00
rt3883.mk ramips: rt3883: use seama-lzma-loader for D-Link DIR-645 2022-11-12 18:15:55 +01:00