openwrt/package/base-files/Makefile
Mathias Kresin e66c47fb14 base-files: gpio switch: set output value with direction
Use the "low" and "high" values to configure the GPIO as an output with
that initial value. It ensures that the gpio doesn't have a unwanted value
during the time the direction is set to ouput and the actual value is
applied.

We don't need to take care of the GPIO polarity for now, since our
exported GPIOs are always active low.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:05:46 +01:00

206 lines
6.3 KiB
Makefile

#
# Copyright (C) 2007-2016 OpenWrt.org
# Copyright (C) 2010 Vertical Communications
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/version.mk
include $(INCLUDE_DIR)/feeds.mk
PKG_NAME:=base-files
PKG_RELEASE:=182
PKG_FLAGS:=nonshared
PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
PKG_BUILD_DEPENDS:=usign/host
PKG_LICENSE:=GPL-2.0
# Extend depends from version.mk
PKG_CONFIG_DEPENDS += \
CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE \
CONFIG_NAND_SUPPORT \
CONFIG_CLEAN_IPKG \
CONFIG_PER_FEED_REPO \
CONFIG_PER_FEED_REPO_ADD_DISABLED \
CONFIG_PER_FEED_REPO_ADD_COMMENTED \
$(foreach feed,$(FEEDS_INSTALLED),CONFIG_FEED_$(feed))
include $(INCLUDE_DIR)/package.mk
ifneq ($(DUMP),1)
STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(CONFIG_TARGET_INIT_PATH) | mkhash md5)
TARGET:=-$(BOARD)
endif
define Package/base-files
SECTION:=base
CATEGORY:=Base system
DEPENDS:=+netifd +libc +procd +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:lede-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
TITLE:=Base filesystem for OpenWrt
URL:=http://openwrt.org/
VERSION:=$(PKG_RELEASE)-$(REVISION)
endef
define Package/base-files/conffiles
/etc/config/
/etc/config/network
/etc/config/system
/etc/crontabs/
/etc/dropbear/
/etc/group
/etc/hosts
/etc/inittab
/etc/iproute2/rt_protos
/etc/iproute2/rt_tables
/etc/passwd
/etc/profile
/etc/profile.d
/etc/protocols
/etc/rc.local
/etc/services
/etc/shadow
/etc/shells
/etc/sysctl.conf
/etc/sysctl.d/
/etc/sysctl.d/local.conf
/etc/sysupgrade.conf
$(call $(TARGET)/conffiles)
endef
define Package/base-files/description
This package contains a base filesystem and system scripts for OpenWrt.
endef
define ImageConfigOptions
mkdir -p $(1)/lib/preinit
echo 'pi_suppress_stderr="$(CONFIG_TARGET_PREINIT_SUPPRESS_STDERR)"' >$(1)/lib/preinit/00_preinit.conf
echo 'fs_failsafe_wait_timeout=$(if $(CONFIG_TARGET_PREINIT_TIMEOUT),$(CONFIG_TARGET_PREINIT_TIMEOUT),2)' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_path="$(TARGET_INIT_PATH)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_env=$(if $(CONFIG_TARGET_INIT_ENV),$(CONFIG_TARGET_INIT_ENV),"")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_cmd=$(if $(CONFIG_TARGET_INIT_CMD),$(CONFIG_TARGET_INIT_CMD),"/sbin/init")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_suppress_stderr="$(CONFIG_TARGET_INIT_SUPPRESS_STDERR)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_ifname=$(if $(CONFIG_TARGET_PREINIT_IFNAME),$(CONFIG_TARGET_PREINIT_IFNAME),"")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_ip=$(if $(CONFIG_TARGET_PREINIT_IP),$(CONFIG_TARGET_PREINIT_IP),"192.168.1.1")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_netmask=$(if $(CONFIG_TARGET_PREINIT_NETMASK),$(CONFIG_TARGET_PREINIT_NETMASK),"255.255.255.0")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_broadcast=$(if $(CONFIG_TARGET_PREINIT_BROADCAST),$(CONFIG_TARGET_PREINIT_BROADCAST),"192.168.1.255")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_net_messages="$(CONFIG_TARGET_PREINIT_SHOW_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_no_failsafe_netmsg="$(CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_no_failsafe="$(CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE)"' >>$(1)/lib/preinit/00_preinit.conf
endef
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
endef
define Build/Compile/Default
endef
Build/Compile = $(Build/Compile/Default)
ifdef CONFIG_SIGNED_PACKAGES
define Build/Configure
[ -s $(BUILD_KEY) -a -s $(BUILD_KEY).pub ] || \
$(STAGING_DIR_HOST)/bin/usign -G -s $(BUILD_KEY) -p $(BUILD_KEY).pub -c "Local build key"
endef
define Package/base-files/install-key
mkdir -p $(1)/etc/opkg/keys
$(CP) $(BUILD_KEY).pub $(1)/etc/opkg/keys/`$(STAGING_DIR_HOST)/bin/usign -F -p $(BUILD_KEY).pub`
endef
endif
ifeq ($(CONFIG_NAND_SUPPORT),)
define Package/base-files/nand-support
rm -f $(1)/lib/upgrade/nand.sh
endef
endif
define Package/base-files/install
$(CP) ./files/* $(1)/
$(Package/base-files/install-key)
$(Package/base-files/nand-support)
if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
fi
if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
fi
$(if $(filter-out $(PLATFORM_DIR),$(PLATFORM_SUBDIR)), \
if [ -d $(PLATFORM_SUBDIR)/base-files/. ]; then \
$(CP) $(PLATFORM_SUBDIR)/base-files/* $(1)/; \
fi; \
)
$(VERSION_SED) \
$(1)/etc/banner \
$(1)/etc/openwrt_version \
$(1)/usr/lib/os-release
$(VERSION_SED_SCRIPT) \
$(1)/etc/openwrt_release \
$(1)/etc/device_info \
$(1)/usr/lib/os-release
$(SED) "s#%PATH%#$(TARGET_INIT_PATH)#g" \
$(1)/sbin/hotplug-call \
$(1)/etc/preinit \
$(1)/etc/profile
mkdir -p $(1)/CONTROL
mkdir -p $(1)/dev
mkdir -p $(1)/etc/config
mkdir -p $(1)/etc/crontabs
mkdir -p $(1)/etc/rc.d
mkdir -p $(1)/overlay
mkdir -p $(1)/lib/firmware
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/lib$(LIB_SUFFIX))
mkdir -p $(1)/mnt
mkdir -p $(1)/proc
mkdir -p $(1)/tmp
mkdir -p $(1)/usr/lib
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/usr/lib$(LIB_SUFFIX))
mkdir -p $(1)/usr/bin
mkdir -p $(1)/sys
mkdir -p $(1)/www
mkdir -p $(1)/root
$(LN) /proc/mounts $(1)/etc/mtab
rm -f $(1)/var
$(LN) /tmp $(1)/var
mkdir -p $(1)/etc
$(LN) /tmp/resolv.conf /tmp/TZ /tmp/localtime $(1)/etc/
chmod 0600 $(1)/etc/shadow
chmod 1777 $(1)/tmp
$(call ImageConfigOptions,$(1))
$(call Package/base-files/install-target,$(1))
for conffile in $(1)/etc/config/*; do \
if [ -f "$$$$conffile" ]; then \
grep "$$$${conffile##$(1)}" $(1)/CONTROL/conffiles || \
echo "$$$${conffile##$(1)}" >> $(1)/CONTROL/conffiles; \
fi \
done
$(if $(CONFIG_INCLUDE_CONFIG), \
echo -e "# Build configuration for board $(BOARD)/$(SUBTARGET)/$(PROFILE)\n" >$(1)/etc/build.config; \
cat $(BIN_DIR)/config.seed >>$(1)/etc/build.config)
$(if $(CONFIG_CLEAN_IPKG),, \
mkdir -p $(1)/etc/opkg; \
$(call FeedSourcesAppend,$(1)/etc/opkg/distfeeds.conf); \
$(VERSION_SED) $(1)/etc/opkg/distfeeds.conf)
endef
ifneq ($(DUMP),1)
-include $(PLATFORM_DIR)/base-files.mk
-include $(PLATFORM_SUBDIR)/base-files.mk
endif
$(eval $(call BuildPackage,base-files))