mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
4e0c54bc5b
The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
98 lines
2.5 KiB
Diff
98 lines
2.5 KiB
Diff
From: Daniel Golle <daniel@makrotopia.org>
|
|
Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
|
|
|
|
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
---
|
|
drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 36 insertions(+)
|
|
|
|
--- a/drivers/mtd/ubi/build.c
|
|
+++ b/drivers/mtd/ubi/build.c
|
|
@@ -1168,6 +1168,73 @@ static struct mtd_info * __init open_mtd
|
|
return mtd;
|
|
}
|
|
|
|
+/*
|
|
+ * This function tries attaching mtd partitions named either "ubi" or "data"
|
|
+ * during boot.
|
|
+ */
|
|
+static void __init ubi_auto_attach(void)
|
|
+{
|
|
+ int err;
|
|
+ struct mtd_info *mtd;
|
|
+ loff_t offset = 0;
|
|
+ size_t len;
|
|
+ char magic[4];
|
|
+
|
|
+ /* try attaching mtd device named "ubi" or "data" */
|
|
+ mtd = open_mtd_device("ubi");
|
|
+ if (IS_ERR(mtd))
|
|
+ mtd = open_mtd_device("data");
|
|
+
|
|
+ if (IS_ERR(mtd))
|
|
+ return;
|
|
+
|
|
+ /* get the first not bad block */
|
|
+ if (mtd_can_have_bb(mtd))
|
|
+ while (mtd_block_isbad(mtd, offset)) {
|
|
+ offset += mtd->erasesize;
|
|
+
|
|
+ if (offset > mtd->size) {
|
|
+ pr_err("UBI error: Failed to find a non-bad "
|
|
+ "block on mtd%d\n", mtd->index);
|
|
+ goto cleanup;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* check if the read from flash was successful */
|
|
+ err = mtd_read(mtd, offset, 4, &len, (void *) magic);
|
|
+ if ((err && !mtd_is_bitflip(err)) || len != 4) {
|
|
+ pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
|
|
+ goto cleanup;
|
|
+ }
|
|
+
|
|
+ /* check for a valid ubi magic */
|
|
+ if (strncmp(magic, "UBI#", 4)) {
|
|
+ pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
|
|
+ goto cleanup;
|
|
+ }
|
|
+
|
|
+ /* don't auto-add media types where UBI doesn't makes sense */
|
|
+ if (mtd->type != MTD_NANDFLASH &&
|
|
+ mtd->type != MTD_NORFLASH &&
|
|
+ mtd->type != MTD_DATAFLASH &&
|
|
+ mtd->type != MTD_MLCNANDFLASH)
|
|
+ goto cleanup;
|
|
+
|
|
+ mutex_lock(&ubi_devices_mutex);
|
|
+ pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
|
|
+ err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
|
|
+ mutex_unlock(&ubi_devices_mutex);
|
|
+ if (err < 0) {
|
|
+ pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
|
|
+ goto cleanup;
|
|
+ }
|
|
+
|
|
+ return;
|
|
+
|
|
+cleanup:
|
|
+ put_mtd_device(mtd);
|
|
+}
|
|
+
|
|
static int __init ubi_init(void)
|
|
{
|
|
int err, i, k;
|
|
@@ -1251,6 +1318,12 @@ static int __init ubi_init(void)
|
|
}
|
|
}
|
|
|
|
+ /* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
|
|
+ * parameter was given */
|
|
+ if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
|
|
+ !ubi_is_module() && !mtd_devs)
|
|
+ ubi_auto_attach();
|
|
+
|
|
err = ubiblock_init();
|
|
if (err) {
|
|
pr_err("UBI error: block: cannot initialize, error %d\n", err);
|