mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
6da3194127
This patch adds supports for the NETGEAR R6200 V1 This device is mainlined in Linux as of 5.4 Specification: - SOC: Broadcom BCM4718A1 (480 MHz) - Flash: 16MB (Macronix MX25L128) - RAM: 128MB DDR2 - SWITCH: BCM53125 - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order) - WLAN 2.4G: In SOC - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360) - USB: 1x USB 2.0 port (Type A) - Buttons: Reset, WLAN, WPS - LED: Amber for Power, others need a workaround - UART: 1x UART on PCB LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7) Firmware Install Instructions ============================= Using the device specific .chk, use that file to perform a normal device upgrade in the OEM admin page. Signed-off-by: Edward Matijevic <motolav@gmail.com>
249 lines
7.5 KiB
Bash
249 lines
7.5 KiB
Bash
PART_NAME=firmware
|
|
|
|
LXL_FLAGS_VENDOR_LUXUL=0x00000001
|
|
|
|
# $(1): file to read magic from
|
|
# $(2): offset in bytes
|
|
get_magic_long_at() {
|
|
dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
|
}
|
|
|
|
# $(1): file to read LE long number from
|
|
# $(2): offset in bytes
|
|
get_le_long_at() {
|
|
echo $((0x$(dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/4 "%02x"')))
|
|
}
|
|
|
|
platform_expected_image() {
|
|
local model="$(cat /tmp/sysinfo/model)"
|
|
|
|
case "$model" in
|
|
"Netgear R6200 V1") echo "chk U12H192T00_NETGEAR"; return;;
|
|
"Netgear WGR614 V8") echo "chk U12H072T00_NETGEAR"; return;;
|
|
"Netgear WGR614 V9") echo "chk U12H094T00_NETGEAR"; return;;
|
|
"Netgear WGR614 V10") echo "chk U12H139T01_NETGEAR"; return;;
|
|
"Netgear WN2500RP V1") echo "chk U12H197T00_NETGEAR"; return;;
|
|
"Netgear WN2500RP V2") echo "chk U12H294T00_NETGEAR"; return;;
|
|
"Netgear WNDR3300") echo "chk U12H093T00_NETGEAR"; return;;
|
|
"Netgear WNDR3400 V1") echo "chk U12H155T00_NETGEAR"; return;;
|
|
"Netgear WNDR3400 V2") echo "chk U12H187T00_NETGEAR"; return;;
|
|
"Netgear WNDR3400 V3") echo "chk U12H208T00_NETGEAR"; return;;
|
|
"Netgear WNDR3400 Vcna") echo "chk U12H155T01_NETGEAR"; return;;
|
|
"Netgear WNDR3700 V3") echo "chk U12H194T00_NETGEAR"; return;;
|
|
"Netgear WNDR4000") echo "chk U12H181T00_NETGEAR"; return;;
|
|
"Netgear WNDR4500 V1") echo "chk U12H189T00_NETGEAR"; return;;
|
|
"Netgear WNDR4500 V2") echo "chk U12H224T00_NETGEAR"; return;;
|
|
"Netgear WNR2000 V2") echo "chk U12H114T00_NETGEAR"; return;;
|
|
"Netgear WNR3500L") echo "chk U12H136T99_NETGEAR"; return;;
|
|
"Netgear WNR3500U") echo "chk U12H136T00_NETGEAR"; return;;
|
|
"Netgear WNR3500 V2") echo "chk U12H127T00_NETGEAR"; return;;
|
|
"Netgear WNR3500 V2vc") echo "chk U12H127T70_NETGEAR"; return;;
|
|
"Netgear WNR834B V2") echo "chk U12H081T00_NETGEAR"; return;;
|
|
"Linksys E900 V1") echo "cybertan E900"; return;;
|
|
"Linksys E1000 V1") echo "cybertan E100"; return;;
|
|
"Linksys E1000 V2") echo "cybertan E100"; return;;
|
|
"Linksys E1000 V2.1") echo "cybertan E100"; return;;
|
|
"Linksys E1200 V2") echo "cybertan E122"; return;;
|
|
"Linksys E2000 V1") echo "cybertan 32XN"; return;;
|
|
"Linksys E3000 V1") echo "cybertan 61XN"; return;;
|
|
"Linksys E3200 V1") echo "cybertan 3200"; return;;
|
|
"Linksys E4200 V1") echo "cybertan 4200"; return;;
|
|
"Linksys WRT150N V1.1") echo "cybertan N150"; return;;
|
|
"Linksys WRT150N V1") echo "cybertan N150"; return;;
|
|
"Linksys WRT160N V1") echo "cybertan N150"; return;;
|
|
"Linksys WRT160N V3") echo "cybertan N150"; return;;
|
|
"Linksys WRT300N V1") echo "cybertan EWCB"; return;;
|
|
"Linksys WRT300N V1.1") echo "cybertan EWC2"; return;;
|
|
"Linksys WRT310N V1") echo "cybertan 310N"; return;;
|
|
"Linksys WRT310N V2") echo "cybertan 310N"; return;;
|
|
"Linksys WRT610N V1") echo "cybertan 610N"; return;;
|
|
"Linksys WRT610N V2") echo "cybertan 610N"; return;;
|
|
"Luxul XAP-310 V1") echo "lxl XAP-310"; return;;
|
|
"Luxul XAP-1210 V1") echo "lxl XAP-1210"; return;;
|
|
"Luxul XAP-1230 V1") echo "lxl XAP-1230"; return;;
|
|
"Luxul XAP-1240 V1") echo "lxl XAP-1240"; return;;
|
|
"Luxul XAP-1500 V1") echo "lxl XAP-1500"; return;;
|
|
"Luxul ABR-4400 V1") echo "lxl ABR-4400"; return;;
|
|
"Luxul XBR-4400 V1") echo "lxl XBR-4400"; return;;
|
|
"Luxul XVW-P30 V1") echo "lxl XVW-P30"; return;;
|
|
"Luxul XWR-600 V1") echo "lxl XWR-600"; return;;
|
|
"Luxul XWR-1750 V1") echo "lxl XWR-1750"; return;;
|
|
esac
|
|
}
|
|
|
|
bcm47xx_identify() {
|
|
local magic
|
|
|
|
magic=$(get_magic_long "$1")
|
|
case "$magic" in
|
|
"48445230")
|
|
echo "trx"
|
|
return
|
|
;;
|
|
"2a23245e")
|
|
echo "chk"
|
|
return
|
|
;;
|
|
"4c584c23")
|
|
echo "lxl"
|
|
return
|
|
;;
|
|
esac
|
|
|
|
magic=$(get_magic_long_at "$1" 14)
|
|
[ "$magic" = "55324e44" ] && {
|
|
echo "cybertan"
|
|
return
|
|
}
|
|
|
|
magic=$(get_magic_long_at "$1" 60)
|
|
[ "$magic" = "4c584c23" ] && {
|
|
echo "lxlold"
|
|
return
|
|
}
|
|
|
|
echo "unknown"
|
|
}
|
|
|
|
platform_check_image() {
|
|
[ "$#" -gt 1 ] && return 1
|
|
|
|
local file_type=$(bcm47xx_identify "$1")
|
|
local magic
|
|
local error=0
|
|
|
|
case "$file_type" in
|
|
"chk")
|
|
local header_len=$((0x$(get_magic_long_at "$1" 4)))
|
|
local board_id_len=$(($header_len - 40))
|
|
local board_id=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
local dev_board_id=$(platform_expected_image)
|
|
echo "Found CHK image with device board_id $board_id"
|
|
|
|
[ -n "$dev_board_id" -a "chk $board_id" != "$dev_board_id" ] && {
|
|
echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
|
|
error=1
|
|
}
|
|
|
|
if ! otrx check "$1" -o "$header_len"; then
|
|
echo "No valid TRX firmware in the CHK image"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
;;
|
|
"cybertan")
|
|
local pattern=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
local dev_pattern=$(platform_expected_image)
|
|
echo "Found CyberTAN image with device pattern: $pattern"
|
|
|
|
[ -n "$dev_pattern" -a "cybertan $pattern" != "$dev_pattern" ] && {
|
|
echo "Firmware pattern doesn't match device pattern ($dev_pattern)"
|
|
error=1
|
|
}
|
|
|
|
if ! otrx check "$1" -o 32; then
|
|
echo "No valid TRX firmware in the CyberTAN image"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
;;
|
|
"lxl")
|
|
local hdr_len=$(get_le_long_at "$1" 8)
|
|
local flags=$(get_le_long_at "$1" 12)
|
|
local board=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
local dev_board=$(platform_expected_image)
|
|
echo "Found Luxul image for board $board"
|
|
|
|
[ -n "$dev_board" -a "lxl $board" != "$dev_board" ] && {
|
|
echo "Firmware ($board) doesn't match device ($dev_board)"
|
|
error=1
|
|
}
|
|
|
|
[ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup
|
|
|
|
if ! otrx check "$1" -o "$hdr_len"; then
|
|
echo "No valid TRX firmware in the Luxul image"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
;;
|
|
"lxlold")
|
|
local board_id=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"')
|
|
local dev_board_id=$(platform_expected_image)
|
|
echo "Found Luxul image with device board_id $board_id"
|
|
|
|
[ -n "$dev_board_id" -a "lxl $board_id" != "$dev_board_id" ] && {
|
|
echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
|
|
error=1
|
|
}
|
|
|
|
notify_firmware_no_backup
|
|
|
|
if ! otrx check "$1" -o 64; then
|
|
echo "No valid TRX firmware in the Luxul image"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
;;
|
|
"trx")
|
|
if ! otrx check "$1"; then
|
|
echo "Invalid (corrupted?) TRX firmware"
|
|
notify_firmware_test_result "trx_valid" 0
|
|
error=1
|
|
else
|
|
notify_firmware_test_result "trx_valid" 1
|
|
fi
|
|
;;
|
|
*)
|
|
echo "Invalid image type. Please use firmware specific for this device."
|
|
notify_firmware_broken
|
|
error=1
|
|
;;
|
|
esac
|
|
|
|
return $error
|
|
}
|
|
|
|
platform_trx_from_chk_cmd() {
|
|
local header_len=$((0x$(get_magic_long_at "$1" 4)))
|
|
|
|
echo -n dd bs=$header_len skip=1
|
|
}
|
|
|
|
platform_trx_from_cybertan_cmd() {
|
|
echo -n dd bs=32 skip=1
|
|
}
|
|
|
|
platform_trx_from_lxl_cmd() {
|
|
local hdr_len=$(get_le_long_at "$1" 8)
|
|
|
|
echo -n dd skip=$hdr_len iflag=skip_bytes
|
|
}
|
|
|
|
platform_trx_from_lxlold_cmd() {
|
|
echo -n dd bs=64 skip=1
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local file_type=$(bcm47xx_identify "$1")
|
|
local trx="$1"
|
|
local cmd=""
|
|
|
|
case "$file_type" in
|
|
"chk") cmd=$(platform_trx_from_chk_cmd "$trx");;
|
|
"cybertan") cmd=$(platform_trx_from_cybertan_cmd "$trx");;
|
|
"lxl") cmd=$(platform_trx_from_lxl_cmd "$trx");;
|
|
"lxlold") cmd=$(platform_trx_from_lxlold_cmd "$trx");;
|
|
esac
|
|
|
|
default_do_upgrade "$trx" "$cmd"
|
|
}
|