openwrt/target/linux
Piotr Dymacz e5d4c09667 ath79: add support for YunCore XD4200 and A782
YunCore XD4200 ('XD4200_W6.0' marking on PCB) is Qualcomm/Atheros based
(QCA9563, QCA9886, QCA8334) dual-band, Wave-2 AC1200 ceiling AP with PoE
(802.3at) support. A782 model ('T750_V5.1' marking on PCB) is a smaller
version of the XD4200, with similar specification but lower TX power.

Specification:

- QCA9563 (775 MHz)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100/1000 Mbps Ethernet (QCA8334), with 802.3at PoE support (WAN)
- Wi-Fi 2.4 GHz:
  - XD4200: 2T2R (QCA9563), with ext. PA (SKY65174-21) and LNA
  - A782: 2T2R (QCA9563), with ext. FEM (SKY85329-11)
- Wi-Fi 5 GHz:
  - XD4200: 2T2R (QCA9886), with ext. FEM (SKY85728-11)
  - A782: 2T2R (QCA9886), with ext. FEM (SKY85735-11)
- LEDs:
  - XD4200: 5x (2x driven by SOC, 1x driven by AC radio, 2x Ethernet)
  - A782: 3x (1x RGB, driven by SOC and radio, 2x Ethernet)
- 1x button (reset)
- 1x UART (4-pin, 2.54 mm pitch) header on PCB
- 1x DC jack (12 V)

Flash instructions:

If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):

  fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
  sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin

In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:

1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
   'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
   seconds, recovery mode should start downloading image from server
   (unfortunately, there is no visible indication that recovery got
   enabled - in case of problems check TFTP server logs)

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-11-25 17:32:46 +01:00
..
apm821xx treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
ar7 kernel: bump 4.9 to 4.9.194 2019-09-24 12:52:05 +02:00
ar71xx ar71xx: ubnt-(xm,xw): add rssileds package 2019-11-21 12:55:50 +01:00
arc770 treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
archs38 treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
armvirt armvirt: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
at91 at91: split up remaining DEVICE_TITLE definitions 2019-10-19 13:16:57 +02:00
ath25 ath25: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
ath79 ath79: add support for YunCore XD4200 and A782 2019-11-25 17:32:46 +01:00
bcm53xx bcm53xx: sysupgrade: support Luxul NAND devices 2019-10-15 20:23:04 +02:00
brcm47xx kernel: bump 4.19 to 4.19.85 2019-11-22 16:56:46 +01:00
brcm63xx kernel: bump 4.19 to 4.19.85 2019-11-22 16:56:46 +01:00
brcm2708 treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
cns3xxx cns3xxx: use proper macros for defining partition regions 2019-11-22 16:56:46 +01:00
gemini treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
generic treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
imx6 imx6: install-dtb as separate IMAGE 2019-09-15 15:00:17 +00:00
ipq40xx kernel: bump 4.19 to 4.19.85 2019-11-22 16:56:46 +01:00
ipq806x kernel: bump 4.14 to 4.14.155 2019-11-22 16:56:46 +01:00
ixp4xx treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
kirkwood kirkwood: Fix FS#505 - Can't install LEDE on Linksys EA3500 2019-10-12 23:42:59 +02:00
lantiq lantiq: remove redundant WiFi LED on FRITZ!Box 7320 2019-11-11 18:17:29 +01:00
layerscape kernel: bump 4.14 to 4.14.155 2019-11-22 16:56:46 +01:00
malta malta: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
mediatek treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
mpc85xx mpc85xx: correct TP-LINK TL-WDR4900 MAC addresses 2019-10-15 18:13:54 +02:00
mvebu treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
mxs treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
octeon octeon: split up remaining DEVICE_TITLE 2019-10-19 13:16:57 +02:00
octeontx octeontx: fix thunderx BGX underflow irq name 2019-10-27 12:13:59 +01:00
omap omap: switch from uEnv.txt to generic distro booting 2019-11-20 10:46:19 +01:00
orion orion: replace backticks by $(...) 2019-09-29 00:46:13 +02:00
oxnas oxnas: convert DEVICE_TITLE to new variables 2019-07-10 16:56:16 +02:00
pistachio pistachio: split up DEVICE_TITLE 2019-10-12 23:37:00 +02:00
ramips ramips: reorganize NETGEAR sercomm boards 2019-11-24 23:17:20 +01:00
rb532 rb532: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
samsung samsung: split up DEVICE_TITLE 2019-09-11 15:17:09 +02:00
sunxi treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
tegra x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATURE 2019-11-11 16:37:13 +01:00
uml kernel: Deactivate CONFIG_BINFMT_MISC 2019-05-11 17:15:41 +02:00
x86 kernel: bump 4.19 to 4.19.84 2019-11-19 14:59:03 +01:00
zynq treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
Makefile