openwrt/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch
Claudiu Beznea e58cd453d5 at91: add kernel support for sama7g5 soc
Add kernel support for SAMA7G5 by back-porting mainline kernel patches.
Among SAMA7G5 features could be remembered:
- ARM Cortex-A7
- double data rate multi-port dynamic RAM controller supporting DDR2,
  DDR3, DDR3L, LPDDR2, LPDDR3 up to 533MHz
- peripherals for audio, video processing
- 1 gigabit + 1 megabit Ethernet controllers
- 6 CAN controllers
- trust zone support
- DVFS for CPU
- criptography IPs

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-02-24 19:05:28 +01:00

227 lines
7.0 KiB
Diff

From 943ed75a2a5ab08582d3bc8025e8111903698763 Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Thu, 19 Nov 2020 17:43:15 +0200
Subject: [PATCH 109/247] clk: at91: sama7g5: do not allow cpu pll to go higher
than 1GHz
Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher
than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at
1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/clk/at91/sama7g5.c | 61 +++++++++++++++++++++++++++++---------
1 file changed, 47 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 29d9781e6712..e0c4d2eb9f59 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -89,11 +89,40 @@ static const struct clk_pll_layout pll_layout_divio = {
.endiv_shift = 30,
};
+/*
+ * CPU PLL output range.
+ * Notice: The upper limit has been setup to 1000000002 due to hardware
+ * block which cannot output exactly 1GHz.
+ */
+static const struct clk_range cpu_pll_outputs[] = {
+ { .min = 2343750, .max = 1000000002 },
+};
+
+/* PLL output range. */
+static const struct clk_range pll_outputs[] = {
+ { .min = 2343750, .max = 1200000000 },
+};
+
+/* CPU PLL characteristics. */
+static const struct clk_pll_characteristics cpu_pll_characteristics = {
+ .input = { .min = 12000000, .max = 50000000 },
+ .num_output = ARRAY_SIZE(cpu_pll_outputs),
+ .output = cpu_pll_outputs,
+};
+
+/* PLL characteristics. */
+static const struct clk_pll_characteristics pll_characteristics = {
+ .input = { .min = 12000000, .max = 50000000 },
+ .num_output = ARRAY_SIZE(pll_outputs),
+ .output = pll_outputs,
+};
+
/**
* PLL clocks description
* @n: clock name
* @p: clock parent
* @l: clock layout
+ * @c: clock characteristics
* @t: clock type
* @f: clock flags
* @eid: export index in sama7g5->chws[] array
@@ -102,6 +131,7 @@ static const struct {
const char *n;
const char *p;
const struct clk_pll_layout *l;
+ const struct clk_pll_characteristics *c;
unsigned long f;
u8 t;
u8 eid;
@@ -110,6 +140,7 @@ static const struct {
{ .n = "cpupll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &cpu_pll_characteristics,
.t = PLL_TYPE_FRAC,
/*
* This feeds cpupll_divpmcck which feeds CPU. It should
@@ -120,6 +151,7 @@ static const struct {
{ .n = "cpupll_divpmcck",
.p = "cpupll_fracck",
.l = &pll_layout_divpmc,
+ .c = &cpu_pll_characteristics,
.t = PLL_TYPE_DIV,
/* This feeds CPU. It should not be disabled. */
.f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
@@ -130,6 +162,7 @@ static const struct {
{ .n = "syspll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
/*
* This feeds syspll_divpmcck which may feed critial parts
@@ -141,6 +174,7 @@ static const struct {
{ .n = "syspll_divpmcck",
.p = "syspll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
/*
* This may feed critial parts of the systems like timers.
@@ -154,6 +188,7 @@ static const struct {
{ .n = "ddrpll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
/*
* This feeds ddrpll_divpmcck which feeds DDR. It should not
@@ -164,6 +199,7 @@ static const struct {
{ .n = "ddrpll_divpmcck",
.p = "ddrpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
/* This feeds DDR. It should not be disabled. */
.f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
@@ -173,12 +209,14 @@ static const struct {
{ .n = "imgpll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "imgpll_divpmcck",
.p = "imgpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT, },
@@ -188,12 +226,14 @@ static const struct {
{ .n = "baudpll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "baudpll_divpmcck",
.p = "baudpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT, },
@@ -203,12 +243,14 @@ static const struct {
{ .n = "audiopll_fracck",
.p = "main_xtal",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "audiopll_divpmcck",
.p = "audiopll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT,
@@ -217,6 +259,7 @@ static const struct {
{ .n = "audiopll_diviock",
.p = "audiopll_fracck",
.l = &pll_layout_divio,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT,
@@ -227,12 +270,14 @@ static const struct {
{ .n = "ethpll_fracck",
.p = "main_xtal",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "ethpll_divpmcck",
.p = "ethpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT, },
@@ -793,18 +838,6 @@ static const struct {
.pp_chg_id = INT_MIN, },
};
-/* PLL output range. */
-static const struct clk_range pll_outputs[] = {
- { .min = 2343750, .max = 1200000000 },
-};
-
-/* PLL characteristics. */
-static const struct clk_pll_characteristics pll_characteristics = {
- .input = { .min = 12000000, .max = 50000000 },
- .num_output = ARRAY_SIZE(pll_outputs),
- .output = pll_outputs,
-};
-
/* MCK0 characteristics. */
static const struct clk_master_characteristics mck0_characteristics = {
.output = { .min = 50000000, .max = 200000000 },
@@ -921,7 +954,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
hw = sam9x60_clk_register_frac_pll(regmap,
&pmc_pll_lock, sama7g5_plls[i][j].n,
sama7g5_plls[i][j].p, parent_hw, i,
- &pll_characteristics,
+ sama7g5_plls[i][j].c,
sama7g5_plls[i][j].l,
sama7g5_plls[i][j].f);
break;
@@ -930,7 +963,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
hw = sam9x60_clk_register_div_pll(regmap,
&pmc_pll_lock, sama7g5_plls[i][j].n,
sama7g5_plls[i][j].p, i,
- &pll_characteristics,
+ sama7g5_plls[i][j].c,
sama7g5_plls[i][j].l,
sama7g5_plls[i][j].f);
break;
--
2.32.0